环境矿物材料治理镉（Cd^2＋）污染研究进展

近年来,环境矿物材料以其经济、有效、无二次污染等特点,在重金属废水处理和土壤修复方面显示出了众多优势,可替代传统的镉污染处理方法。本文综述了国内外环境矿物材料在处理镉污染方面的研究进展,并对今后应用环境矿物材料治理镉污染提出了一些建议。     

地球化学异常再现性与可对比性

不同密度采样是否可以获得稳定的和可追索的地球化学模式是检验采样是否具有代表性，分析技术是否成熟的重要依据。笔者选择新疆哈密大南湖地区约6400km^2面积，进行了从超低密度(1个样／100km^2)，甚低密度(1个样／25km^2)直到低密度(1个样／4km^2)地球化学采样，对比了3种密度地球化学采样所获得的地球化学数据和异常分布模式。得出如下结论：超低密度、甚低密度、低密度地球化学调查获得的元素含量平均值和背景值非常接近；超低密度、甚低密度、低密度调查所圈定的地球化学省在形态上和变化趋势上非常相似，浓集中心的位置重合，表明不同调查阶段可获得稳定的和可追索的地球化学模式；采样密度越大数据离散程度越高，即最小值更小，最大值更大，表明元素分布的局部不均匀性，正是这种局部的不均匀性才能通过加密采样刻画出地球化学模式的细节变化，为逐步追踪矿化体奠定了基础；超低密度和甚低密度采样可以有效圈定矿集区所形成的大规模地球化学异常，低密度地球化学调查不仅可以圈定矿集区异常，同时可以圈定分散矿化的小规模局部异常。     

河南省平顶山盐田盐矿床成矿特征探讨

以现有钻孔及区域资料为基础，对平顶山盐田盐矿床形成的构造条件和盐湖的沉积模式、沉积类型成矿物源进行了分析，为平顶山盐田的进一步勘查和开发提供了宝贵资料。     

水库下游河流再造床过程中的河岸侵蚀

根据实测河道地形资料,分析了水库下游河床演变中的河岸侵蚀现象,包括不同横向边界约束条件、不同床沙组成和不同河型河段的河岸侵蚀的特征及规律。结果表明:①水库下游均会有河岸侵蚀发生,但初期一般以下切为主,后期以展宽为主。②对于横向边界约束较强的河段,河岸侵蚀相对较弱;相反,则河岸坍塌严重,河岸侵蚀强烈;③对不同的河床组成和边滩组成的河段:河床较粗特别是形成抗冲粗化层,且边滩组成较细的河段,河岸侵蚀现象非常剧烈;河床组成较细的河段,如果边滩抗冲性较强,则河岸侵蚀现象相对较弱,如果滩地组成较细、容易坍塌,河岸侵蚀也会较强;④不同的河型有着不同的河岸侵蚀现象。分汊河段以主汊为主;游荡段的游荡特性在初期受到抑制;弯曲河段的撇弯切滩现象较普遍。     

矿产勘查与评估的统计地球化学方法

统计地球化学在矿产勘查与评估中的应用，主要包括采术规则，临界品位计算，资源量／储量公式，边界品位确定，网度判别，矿床经济分类以及矿床开发风险等内容。     

A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

Simulation of individual particle movement in a gravel streambed

A two‐dimensional simulation model of travel distances of individual particles in a gravel‐bed river is presented. The model is based on a number of rules, which include particle size, entrainment, trajectory, distance of movement and entrapment. Particle interactions are controlled by resistance fields defined about each obstacle and critical elevation defined in the model. Resistance fields, particle dropping and critical elevation rules control particle interactions. The interaction rules cause the particles to develop pebble clusters, stone cells and transverse structures (transverse ribs). The simulated travel distances of individual particles are consistent with reported field results. Individual particle travel distances were simulated using two different models; one without interactions between the individual particles and the stationary bed and one with interactions. The case without interactions demonstrates the random nature of sediment transport, and narrow ranges of travel distances. Wider ranges of travel distances, similar to those for natural situations, were obtained for the cases with interactions. The more intense the interaction between the mobile stones and the stationary ones, the wider the range of distances of travel for a given particle size. Modelling the mean travel distance yielded a result similar to that published previously, which was based on empirical data. Well developed bed‐surface structures were obtained for relatively poorly sorted sediment with intense interactions between particles. Transverse structures developed when relatively large particles were allowed to move. Copyright © 2002 John Wiley & Sons, Ltd.