Does subterranean flow initiate mud banks off the southwest coast of India?

Coastal waters off the southwest coast of India draw special attention because of the occurrence of mud banks at certain locations during southwest monsoon period. The present study puts forward a hypothesis of a subterranean flow, which could be a plausible mechanism to initiate the mud banks. The subterranean flow is believed to be coupled with activated trending faults and originate from the adjacent watershed (Vembanad Lake) separated from the sea by a narrow strip of land where submerged porous lime shell beds are present. When the lake water injection occurs through the fault, the mud/clay gets excited by its thixotrophic properties (as the overlying water looses its electrolyte) and transforms into a flowing fluid. The lowering of salinity due to the introduction of fresh water keeps the mud suspension in the water column for longer duration, leading to the formation of mud banks. The idea of subterranean flow through lime shell beds initiating formation of mud banks may apply globally to any coastal regions hugged by wetlands and of similar geological conditions.     

A technique for conducting seismic refraction experiments on the ocean bed using bottom shots

A technique has been devised for firing arrays of bottom shots on the ocean bed in depths upto 4000 m or more. Ten kilogram explosive charges are dropped from the surface while the shooting ship is navigated acoustically. They are detonated at preset times by an electronic timer which initiates an electrical detonator, detonating cord and cast PETN/TNT explosive. Ranges to ocean bottom seismographs, and the shot instants, can be calculated from the arrival-time differences of the direct and surface-reflected water waves. The accuracy, which is dependent on water-depth and range, was better than 22 m in range and 14 msec in shot instant for our experiments.     

9810号台风期间厦门近岸海域磷的分布特征

于1998年10号台风期间及台风解除后一周内，对九龙江口和西海域表层水中总磷（TP）、溶解态无机磷（DIP）、溶解态有机磷（DOP）、颗粒态磷（PP）、颗粒态无机磷（PIP）和颗粒态有机磷（POP）进行了为期9d（10月26日至11月3日）的现场观测。根据观测结果，讨论了台风对上述各形态磷的分布特征的影响，认为台风伴随的增水、入海径流量的骤增和底质再悬浮的加剧导致表层水体中各形态磷含量的短期增加。     

海冰板的环形屈曲的压缩破坏

在轴对称条件下，给出海冰板的环向屈曲面临载荷，从细观力学的观点分析了微裂纹开裂的条件，扩展方向并给出绕海洋平台柱腿冰的损伤区的尺度。所给出的临界半径是一个与冰材料力学特征，冰的微结构参数一海洋平台柱腿半径相关的特征参数。对现场所观察和测量的结构给出了解释和定量分析。     

GVG采样线代表性检验

通过在实验区内设置不同类型的采样线,对GVG采样线的代表性进行检验.结果表明,高速公路和乡村道路类型的采样线对区域代表性的精度在95%以上;国道为86.726%;省道为65.447%.对于不同的缓冲区,高速公路、省道和乡村道路类型采样线,以200m缓冲区的代表性最好.而国道则以800m缓冲区的代表性最好.对于不同的作物而言,无论何种类型的采样线或者缓冲区,种植面积最大的棉花的精度是最好的.最低的是省道采样线1000m缓冲区,精度是78.146%,最好的是国道采样线800m缓冲区,精度是99.974%.除省道外,其他精度都在94.8%以上.这说明GVG采样线所获得的成数对于区域主要作物的代表性是很好的.     

基于钻孔数据的三维地质建模与可视化研究

三维地质模型能够完整准确地表达复杂地质现象的边界条件及地质体内含的各种地质构造,直观地再现地质单元的空间展布及其相互关系,最大限度地提高地质分析的直观性和准确性,因此三维地质建模已引起地质、采矿、岩土工程等诸多领域的日益重视。笔者在综合考察多种建模方法的基础上,结合工程实践,提出了一种实用的工程地质三维建模实施方法。该方法以钻孔资料和地质剖面数据为三维地质建模的源数据,允许用户手工修正模型剖面地层分界线,从而实现对建模过程的干预和控制,克服了单纯依靠钻孔数据建模结果不精确且难以修正的问题。最后,通过一个研究实例展示了该方法的实际建模效果。     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

长江流域沿江镉异常源追踪与定量评估的方法技术研究:以长江流域安徽段为例

长江全流域性的Cd异常是被中国正在进行的多目标地球化学调查发现的重大生态环境问题。以长江流域安徽段为研究对象,对沿江镉异常源追踪与定量评估的方法技术进行了系统研究。通过对安徽段长江干流及其主要支流悬浮物中元素含量的测量查明:悬浮物是流域内重金属元素大跨度迁移的主要载体;Cd在悬浮物中的富集程度远远大于其他重金属元素,这或许正是Cd可以形成沿江流域性异常的主要原因;长江干流悬浮物中重金属元素含量的变化明显受到沿江支流的影响。安徽段长江干流及其主要支流重金属元素输出通量定量计算结果表明:秋蒲河是安徽段重金属元素输出通量最大的支流,每年在安徽段长江两岸土壤中沉积下约4.45t的Cd。利用悬浮物加密测量、1∶5万土壤测量和岩石测量对顺安河流域Cd异常源追踪结果显示:内生金属矿床特别是铅锌矿是悬浮物中Cd的最大的供应源。采用河漫滩沉积物分层采样技术和同位素测年技术,初步恢复了研究区Cd等重金属元素沉积和污染的地球化学历史,对研究区Cd等重金属元素异常的未来演变趋势进行了预警预测。     

Zircon M257 ‐ a Homogeneous Natural Reference Material for the Ion Microprobe U‐Pb Analysis of Zircon

We introduce and propose zircon M257 as a future reference material for the determination of zircon U‐Pb ages by means of secondary ion mass spectrometry. This light brownish, flawless, cut gemstone specimen from Sri Lanka weighed 5.14 g (25.7 carats). Zircon M257 has TIMS‐determined, mean isotopic ratios (2s uncertainties) of 0.09100 ± 0.00003 for ²⁰⁶pb/²³⁸U and 0.7392 ± 0.0003 for ²⁰⁷pb/²³⁵U. Its ²⁰⁶pb/²³⁸U age is 561.3 ± 0.3 Ma (unweighted mean, uncertainty quoted at the 95% confidence level); the U‐Pb system is concordant within uncertainty of decay constants. Zircon M257 contains ～ 840 μg g^?1 U (Th/U ～ 0.27). The material exhibits remarkably low heterogeneity, with a virtual absence of any internal textures even in cathodoluminescence images. The uniform, moderate degree of radiation damage (estimated from the expansion of unit‐cell parameters, broadening of Raman spectral parameters and density) corresponds well, within the “Sri Lankan trends”, with actinide concentrations, U‐Pb age, and the calculated alpha fluence of 1.66 × 10¹⁸ g^?1. This, and a (U+Th)/He age of 419 ± 9 Ma (2s), enables us to exclude any unusual thermal history or heat treatment, which could potentially have affected the retention of radiogenic Pb. The oxygen isotope ratio of this zircon is 13.9%o VSMOW suggesting a metamorphic genesis in a marble or calc‐silicate skarn.     

Recommended Values of 239Pu, 240Pu and 239+240Pu Concentrations in Reference Material IAEA-315 (Marine Sediment) Estimated by Thermal Ionisation Mass Spectrometry, Inductively Coupled Plasma-Mass Spectrometry and Alpha Spectrometry

The recommended concentrations of ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu in reference material IAEA‐315 (marine sediment) were estimated by three analytical methods: isotope dilution thermal ionisation mass spectrometry (TIMS), isotope dilution inductively coupled plasma‐mass spectrometry (ICP‐MS) and alpha spectrometry. The determination of ²³⁹Pu and ²⁴⁰Pu (^239+240Pu by alpha spectrometry) was carried out with samples from randomly selected bottles using each method. Plutonium‐238 was also measured by alpha spectrometry. A plutonium‐242 reference material was used as a spike for the quantitative analysis. The influence of ²⁴²Pu in the samples was therefore calculated; however, this contribution was less than the range of uncertainty and did not influence the final results. The obtained data were statistically analysed using variance component analysis and paired comparison. The combined standard uncertainties from “method/measurement”, “bottle” and “sub‐sample” were in the order of 3 to 6%. The main contributions to the uncertainty were from the material heterogeneity and from systematic differences between methods. Based on this study with twenty‐seven analyses using 10–14 g sample mass, concentrations of (38 ± 3) Bq kg^?1, (28 ± 3) Bq kg^?1 and (66 ± 4) Bq kg^?1 are proposed as recommended values for ²³⁹Pu, ²⁴⁰Pu and ^239+240Pu, respectively, and (9.5 ± 0.4) Bq kg^?1 for ²³⁸Pu as an information value in reference material IAEA‐315. In mass concentration units, these amount to (16.4 ± 1.2) ng kg^?1, (3.3 ± 0.4) ng kg^?1 and (0.015 ± 0.003) ng kg^?1 for ²³⁹Pu, ²⁴⁰Pu and ²³⁸Pu, respectively. The certified reference materials NIST 4350B and NIST 4354 were also analysed by TIMS for quality assurance of the method used in this study.