土石混合体分形几何特征与强度演化特征

针对土石混合体的结构性特点,以含石量为20%、30%、40%、50%、60%的土石混合体为研究对象,基于多重分形原理研究多重分形特征,研究分形维数与强度之间的关系。研究表明,土石混合体具有双重分形特征,不同尺度条件下具有不同分形指标,包括块石粒度、土体粒度以及平均粒度等分形维数,与含石量相关。单轴压缩试验表明,抗压强度随含石量增加呈现先增大后减小的趋势,根据单维分形特征,确定最优含石量约为40%。建立了含石量、不同分形维数指标与抗压强度之间的关系,分析了双重因素综合影响下抗压强度的变化特征,确定了含石量与分形维数之间存在最优区域。     

GPS几何监测系统的三维可视化设计与初步实现

现代GPS几何监测系统的数据采样率高,监测点数多,数据管理与利用的可视化技术能使这些数据信息生动、直观。文中以Vc＋＋6．0为开发工具、OpenGL为图形接口,利用OpenGL提供的几何建模、光照等特性,结合苏通大桥GPS监测系统数据,设计并初步实现三维监测数据的动态可视化显示。     

3维重构精度估计的矩阵分析方法

3维重构可以由影像序列快捷方便地提取目标的3维几何信息。但3维重构的基础是多视几何理论,其计算是基于矩阵推导的非线性过程,故传统摄影测量理论难以用于评估其误差,本文提出一种3维重构精度的估计方法,采用矩阵分析方法,给出了评定重构精度的推导过程,并结合实验数据验证了精度估计的正确性。     

模糊地理实体不确定性综合描述研究

从二型模糊的角度讨论了模糊地理实体的不确定性,基于空间数据的位置误差,利用模糊集的λ-截集和圆误差带模型推导了模糊地理实体隶属度的误差模型,并给出了隶属度不确定性的度量方法,提出了用隶属度误差立方体来综合描述模糊点的不确定性。     

Recognition of two contrasting structural-and mineralogical-gold mineral systems in the Youjiang basin,China-Vietnam:Orogenic gold in the south and Carlin-type in the north

The gold deposits in the Youjiang basin,totaling 25 Moz gold,have traditionally been thought to be of Carlintype,particularly those with extensional structural geometries in the northern basin dominated by platform sedimentary sequences.However,the structural geometries,mineralization styles and alteration types for the Jinya,Gaolong and Nakuang gold deposits in the south-central part of the basin are remarkably similar to those of unequivocal orogenic gold deposits.Structural studies show that gold mineralization in the three gold deposits was controlled by tight "locked-up"anticlines with NW—SE-to E-W-trending and/or concomitant thrusts and/or shear zones,which resulted from NE-SW-to N-S-trending compression or transpression following the Early Triassic closure of the Paleo-Tethyan Ocean.Alteration zones in these deposits are dominated by silicification(quartz),sericitization,sulfidation and carbonation.Zoned pyrites in these deposits comprise Au-poor cores and invisible Au-bearing rims with minor external free gold.Euhedral to subhedral auriferous arsenopyrites also contribute to the gold budget.These features indicate that the three gold deposits are sediment-hosted orogenic gold deposits that contrast markedly with the Carlin-type gold deposits in the northern part of the Youjiang basin in terms of structural geometry and timing,mineralization style and nature of associated alteration.Although additional reliable ages using robust methodologies are still required,the older isotopic ages of the gold deposits in the south-central Youjiang basin are also consistent with earlier formation during transpression that predated extension during orogenic collapse,the period of formation of the Carlin-type gold deposits in the northern Youjiang basin.     

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.     

汶川M_W7.9地震起始破裂断层几何结构

本文收集使用紫坪铺水库台网记录到的汶川地震主震P波波形资料,利用P波反投影叠加法获取了2008年5月12日汶川M_W7.9地震起始破裂的时空演化过程.通过分析本次大地震起始破裂阶段(0～1s)破裂点在三维空间内的分布特征,确定了本次大地震起始破裂位置及起始破裂断层几何结构模型.得到以下结果:汶川地震起始破裂点位于31.013±0.002°N、103.392±0.002°E,震源深度为8.2±0.4km,发震时刻为2008年5月12日14∶27∶58.80±0.4.汶川地震起始破裂的最佳断层面走向为NE48°,倾向NW35°,起始阶段破裂的深度范围为地下7.5～9km.     

岩石空心圆柱扭剪仪研制的重点问题及研究进展

随着深部岩体工程的发展,开挖卸荷导致的应力主轴旋转问题引起了广泛关注。首先,分析总结了岩体工程中存在的应力主轴旋转问题及其对岩体工程稳定性的影响;其次,介绍了土体空心圆柱扭剪仪的发展现状及其特点,从荷载的施加方式、试样尺寸两个方面指出了研制岩石空心圆柱扭剪仪的关键问题,并与土体空心圆柱扭剪仪进行了对比,提出了新的扭矩施加技术和合理的岩石空心圆柱试样尺寸;最后,总结概括了考虑应力主轴旋转的土体本构模型的研究成果,并对考虑应力主轴旋转的岩石本构关系的研究进行了展望。该工作将对岩石空心圆柱扭剪仪的研制和相关理论的研究提供一定的参考和指导。     

海洋三维VC观测系统优化设计

观测系统设计在地震勘探中起着至关重要的作用,最佳观测系统不仅可以提高资料品质,还能够降低采集成本。通过对海洋垂直缆（vertical cable,VC）进行正演模拟我们发现,随着偏移距的增大,同相轴会出现交叉、合并现象,地层顺序也会发生变化。我们针对单VC和多VC的特点,分别设计了相应的观测系统。然后对所设计的观测系统进行评价与优化,并得出了一些有益的结论：采用增加激发点密度的方法对面元覆盖次数的改善效果要好于采用增加激发面积的方法对面元覆盖次数的改善效果;当目标层存在倾角时,通过在构造走向上增加激发线条数,同时在下倾方向上增加激发线长度可以补偿照明损失;当目标层为背斜或向斜时,通过增大最大环半径来增加背斜和向斜照明范围的方法奏效甚微;当激发面积和接收面积相等时,通过同时增大激发面积和接收面积来提高中心区域面元覆盖次数的方法行不通,而当激发面积大于接收面积时则该问题得以解决。