基于地理实体的基础测绘生产组织模式探索

首先分析了目前我国基础地理信息资源建设存在的主要问题,提出了通过构建地理实体数据库实现基础地理信息资源的共享和深入应用的构想。其次,深入分析了目前国内外地理实体数据库的研究及建设现状。在以上基础上,最后以优先满足国家事权为原则,提出了基于地理实体数据采集的我国基础测绘国家、省、市县任务分工和生产组织模式构想。     

Temporal and environmental significance of microbial lamination: Insights from Recent fluvial stromatolites in the River Piedra,Spain

Despite extensive research, the environmental and temporal significance of microbial lamination is still ambiguous because of the complexity of the parameters that control its development. A 13 year monitored record of modern fast‐accreting calcite stromatolites (mean 14 mm year^?1) from artificial substrates installed in rapid flow in the River Piedra (north‐east Spain) allows comparison of the sedimentological attributes of successive six‐month depositional packages with the known climatic, hydrophysical and hydrochemical parameters of the depositional system. The stromatolites are formed of dense, porous and macrocrystalline composite laminae. The dense and porous composite laminae, which are composed of two to eight laminae consisting largely of calcified cyanobacteria, are characterized by: (i) dense composite laminae, up to 15 mm thick, mostly with successive dense laminae and minor alternating dense and porous laminae; and (ii) porous composite laminae, up to 12 mm thick, consisting mainly of porous laminae alternating with thinner dense laminae. Most of the dense composite laminae formed during the warm periods (April to September), whereas most of the porous composite laminae developed in the cool periods (October to March). Each dense and porous composite lamina represents up to or slightly longer than six months. The alternation of these two types of composite laminae parallels seasonal changes in temperature. The dense and porous laminae result from shorter (for example, intraseasonal) variations in temperature, insolation and hydrological conditions. The macrocrystalline laminae, with crystals >100 μm long, occur isolated and grouped into composite laminae up to 1·7 mm thick. Their occurrence suggests the absence or poor development of microbial mats over periods of weeks to several months. Thus, stromatolite lamination can record different‐order, periodic and non‐periodic changes in the magnitude of environmental parameters over a single year. These results hold important implications for the temporal and environmental interpretation of lamination in microbial structures.     

Dimensionless input parameters in discrete element modeling and assessment of scaling techniques

A set of dimensionless input parameters were defined for DEM using a characteristic time which is a function of density and elastic modulus of particles and an arbitrary characteristic length. Dimensionless strain rate and mass damping ratio are inversely proportional to the characteristic time, and stress is normalized by elastic modulus to give dimensionless stress. It was demonstrated that the response of a model in the dimensionless scale is invariant with the choice of density, elastic modulus and the characteristic length if dimensionless strain rate and mass damping ratio are kept constant. Small time step is a prohibitive aspect of DEM. Scaling techniques are widely employed to enlarge the time step. Using the dimensionless scheme, it was learned that density scaling is equivalent to the use of a higher strain rate, and stiffness scaling results in a higher strain rate and an elevated stress state in the dimensionless scale.     

Determination of microscopic parameters of quartz sand through tri-axial test using the discrete element method

A calibration procedure, in which coupled effects of microscopic parameters are considered, is proposed to determine the values of the microscopic parameters in the Discrete Element Method (DEM) for Fujian quartz sand. Laboratory tri-axial tests are conducted to be compared with the DEM simulations and the effects of end restraint in the laboratory tests are eliminated through a digital image measurement system. Sensitivities of the macroscopic behaviour of the specimen to the microscopic parameters are analyzed through DEM simulations. Four coupled effects of the microscopic parameters on the macroscopic behaviour are investigated through a graphic method and then considered in the calibration procedure.     

基于复合方法的天水盆地宽频带地震动模拟

本文采用有限差分和随机振动合成结合的复合方法,模拟了当礼县—罗家堡断裂发生矩震级Mw7.7级大地震时,在天水盆地产生的宽频带地震动场,分析了在设定地震条件下盆地内的地震动分布特征,为该区黄土地震滑坡分析提供了地震动参数结果。结果显示:(1)有限差分法和随机振动合成法可以很好地互补,得到盆地内地表宽频带地震动;(2)地震在盆地区域产生了强烈地震动,PGA(峰值加速度)介于150~900 gal,离断层较近的区域东南角的PGA最大,随着断层距的增加,PGA逐渐减小。河谷南侧的PGA值相比北侧较大,具备诱发滑坡的强大动力条件;(3)盆地区域PGV(峰值速度)最大为120 cm/s。受第四系覆盖层放大效应和地形放大效应共同影响,水平向地震动在盆地区域东侧和中部具有较大PGV,而西侧PGV相对较小。竖向地震动在盆地区域东侧较弱,而在中部和西侧较强,特别是最西侧陡峭的山坡上,PGV达到了最大值。此外,竖向地震动明显受到覆盖层厚度的影响,譬如在盆地区域南侧的中间部位,也具有较大的PGV。     

Fault structures and their geoelectric parameters in the epicentral zone of the 27 September 2003 Chuya earthquake (Gorny Altai) from resistivity data

This paper presents an integrated measurement technique based on DC methods (vertical electrical sounding, electrical resistivity tomography) which was used to identify faults and determine their geoelectric parameters in the western part of the Chuya basin. New information on the structure of the Chagan River valley located in the zone of the disastrous 27 September 2003 Chuya earthquake has been obtained from the results of these methods. Geoelectric cross-sections of the sedimentary sequence and the upper part of the basement were obtained from VES data, showing the block structure of the study area. Electrical resistivity tomography sections confirm the presence of a major fault between basement blocks of different heights and indicate the presence of faults bounding the valley on its right side and in the southwestern part.     

省级基础测绘DLG产品质量控制

由于自身的复杂性,省级基础测绘DLG产品一直以来都是质量控制的重点和难点。"十三五"期间,基础测绘DLG产品更新具有了新的特点,不可控因素显著增加,严格进行省级DLG产品质量控制变得非常必要。该文总结了"十二五"期间DLG产品质量控制的可行经验,通过分析省级DLG产品基本内容,指出了DLG产品主要质量问题,提出了保障质量的对策建议。     

水准测量中尺度比参数的附加系统参数的Partial EIV模型解法

针对目前水准测量中尺度比参数的附加系统参数的平差模型,本文对模型进行重构,提出尺度比参数的附加系统参数的partial errors-in-variables（Partial EIV）模型,给出总体最小二乘准则下的解算公式及迭代算法。实际算例和模拟数据结果表明,本文方法与传统方法在处理尺度比参数为附加系统参数时的效果基本一致,并给出相关的理论依据。     

青藏高原北部活动层土壤热力特性的研究

利用2003年10月～2004年9月期间高原北部可可西里(QT01)、北麓河(QT02)、开心岭(QT05)、通天河(QT06)等地活动层土壤温度梯度、土壤热通量及土壤水分的观测资料,计算了高原北部活动层土壤的导热率、土壤容积热容量、导温率等土壤热力参数.结果显示,QT02、QT05、QT06三站导热率、导温率夏秋季节较大而冬季较小,容积热容量则相反,表现为秋冬季节大而夏季较小;QT01站导热率表现为春季大,夏季较小;表层土壤粒度较小及较低的土壤湿度是冬季导热率较小的可能原因;冻土的热力特征参量可描述为相应深度的温度、体积含冰量及土壤盐度的函数,土壤含水量是融土热特征参数的主要影响因子;土壤水分含量小于某一临界值时,导温率随土壤水分含量的增大而增大,反之则减小.     

含气介质临界点、流体和骨架弹性参数的数值计算方法

目前临界孔隙度及孔隙介质的研究主要为测试分析的实验方法,如何运用数值计算方法求取孔隙流体介质临界点和组分弹性参数一直是备受关注的课题.本文提出了求取孔隙介质临界点、孔隙内流体和骨架弹性参数的数值计算公式及方法,并结合含气样品测试数据实现了这种数值计算.文章首先给出了3个包含孔隙度的线性方程,通过有机组合每个线性方程中的两个系数得到求取有关弹性参数的数值计算公式.然后,详细阐述了计算的方法和步骤以及需要注意的问题,把室内含气砂岩样品实测的综合介质密度、纵波速度和横波速度作为数值计算的输入数据,求得了临界点和流体及骨架等相关弹性参数的具体数值.通过比较分析本文数学方法求得的计算数据与实验方法测得的实测数据,表明了该数值计算公式的正确性和数值实现方法的有效性.