基于GNSS浮标和验潮资料的HY-2A卫星高度计绝对定标

为探测我国HY-2A卫星高度计海面高测量绝对偏差及其在轨运行状态,本文利用GNSS浮标星下点同步测量和验潮资料海面高传递方法在山东千里岩和珠海担杆岛海域开展定标研究。为验证GNSS浮标定标方法的准确性,还对国外卫星Jason-2和Saral进行了定标实验。实验表明GNSS浮标绝对海面高测量精度达2 cm,对Jason-2和Saral高度计多个周期定标得到的海面高偏差均值分别为5.7 cm和-2.3 cm,与国际专门定标场的结果符合较好。2014年9月和2015年5月HY-2A卫星高度计浮标定标结果分别是-65 cm和-91 cm,因两次结果差异显著,故又利用千里岩验潮站资料对HY-2A卫星高度计第56至73周期进行了定标分析,结果证明HY-2A卫星海面高存在约-51 cm/a的漂移,置信度为95%的回归分析表明浮标和验潮定标结果符合。本文研究结果表明在我国尚无专门定标场的情况下,可利用GNSS浮标对我国高度计实施灵活、精准的在轨绝对定标,在有高度计轨迹经过验潮站的情况下可使用验潮资料结合精密大地水准面模型进行绝对定标。     

树轮长年表在全球变化相关领域中的应用研究进展-以14C曲线校正、环境考古和地质灾害事件定年为例

近几十年树轮年代学得到了迅速发展,现已成功建立了大量长度逾千年的树轮长年表。本文评述树轮长年表在全球变化相关研究领域中的应用。树轮长年表可为¹⁴C定年提供校准曲线,从而将样本的¹⁴C年龄转化为日历年龄,提高了¹⁴C测年的精度;也可为环境考古如古木建筑及墓葬等提供定年服务,确定古木构建筑的建造年代;树轮长年表在地质灾害事件定年方面也发挥了重要作用。然而,树轮长年表在上述研究领域的应用也存在不足,最新的国际¹⁴C会议公布的¹⁴C校正曲线中能够准确定年的树轮校正部分仅为过去12 410年,目前尚无法提供更长时间尺度的树轮校正曲线。在对木构建筑进行定年时受到古木样本量不足的限制等。因此,为了更好地发挥树轮长年表的应用潜力,应不断发掘与延长现有树轮宽度长年表,同时建立长年表的C、O同位素序列,以期为长年表的应用不断做出贡献。     

Automatic mapping of lunar landforms using DEM-derived geomorphometric parameters

Developing approaches to automate the analysis of the massive amounts of data sent back from the Moon will generate significant benefits for the field of lunar geomorphology. In this paper, we outline an automated method for mapping lunar landforms that is based on digital terrain analysis. An iterative self-organizing (ISO) cluster unsupervised classification enables the automatic mapping of landforms via a series of input raster bands that utilize six geomorphometric parameters. These parameters divide landforms into a number of spatially extended, topographically homogeneous segments that exhibit similar terrain attributes and neighborhood properties. To illustrate the applicability of our approach, we apply it to three representative test sites on the Moon, automatically presenting our results as a thematic landform map. We also quantitatively evaluated this approach using a series of confusion matrices, achieving overall accuracies as high as 83.34% and Kappa coefficients (K) as high as 0.77. An immediate version of our algorithm can also be applied for automatically mapping large-scale lunar landforms and for the quantitative comparison of lunar surface morphologies.     

Time stability of spring and superconducting gravimeters through the analysis of very long gravity records

Long gravity records are of great interest when performing tidal analyses. Indeed, long series enable to separate contributions of near-frequency waves and also to detect low frequency signals (e.g. long period tides and polar motion). In addition to the length of the series, the quality of the data and the temporal stability of the noise are also very important. We study in detail some of the longest gravity records available in Europe: 3 data sets recorded with spring gravimeters in Black Forest Observatory (Germany, 1980–2012), Walferdange (Luxemburg, 1980–1995) and Potsdam (Germany, 1974–1998) and several superconducting gravimeters (SGs) data sets, with at least 9 years of continuous records, at different European GGP (Global Geodynamics Project) sites (Bad Homburg, Brussels, Medicina, Membach, Moxa, Vienna, Wettzell and Strasbourg). The stability of each instrument is investigated using the temporal variations of tidal parameters (amplitude factor and phase difference) for the main tidal waves (O1, K1, M2 and S2) as well as the M2/O1 factor ratio, the later being insensitive to the instrumental calibration. The long term stability of the tidal observations is also dependent on the stability of the scale factor of the relative gravimeters. Therefore we also check the time stability of the scale factor for the superconducting gravimeter C026 installed at the J9 Gravimetric Observatory of Strasbourg (France), using numerous calibration experiments carried out by co-located absolute gravimeter (AG) measurements during the last 15 years. The reproducibility of the scale factor and the achievable precision are investigated by comparing the results of different calibration campaigns. Finally we present a spectrum of the 25 years of SG records at J9 Observatory, with special attention to small amplitude tides in the semi-diurnal and diurnal bands, as well as to the low frequency part.     

Two-dimensional physical-based inversion of confined and unconfined aquifers under unknown boundary conditions

An inverse method is developed to simultaneously estimate multiple hydraulic conductivities, source/sink strengths, and boundary conditions, for two-dimensional confined and unconfined aquifers under non-pumping or pumping conditions. The method incorporates noisy observed data (hydraulic heads, groundwater fluxes, or well rates) at measurement locations. With a set of hybrid formulations, given sufficient measurement data, the method yields well-posed systems of equations that can be solved efficiently via nonlinear optimization. The solution is stable when measurement errors are increased. The method is successfully tested on problems with regular and irregular geometries, different heterogeneity patterns and variances (maximum K_max/K_min tested is 10,000), and error magnitudes. Under non-pumping conditions, when error-free observed data are used, the estimated conductivities and recharge rates are accurate within 8% of the true values. When data contain increasing errors, the estimated parameters become less accurate, as expected. For problems where the underlying parameter variation is unknown, equivalent conductivities and average recharge rates can be estimated. Under pumping (and/or injection) conditions, a hybrid formulation is developed to address these local source/sink effects, while different types of boundary conditions can also exert significant influences on drawdowns. Local grid refinement near wells is not needed to obtain accurate results, thus inversion is successful with coarse inverse grids, leading to high computation efficiency. Furthermore, flux measurements are not needed for the inversion to succeed; data requirement of the method is thus not much different from that of interpreting classic well tests. Finally, inversion accuracy is not sensitive to the degree of nonlinearity of the flow equations. Performance of the inverse method for confined and unconfined aquifer problems is similar in terms of the accuracy of the estimated parameters, the recovered head fields, and the solver speed.     

First-principles derivation of reactive transport modeling parameters for particle tracking and PDE approaches

Both Eulerian and Lagrangian reactive transport simulations in natural media require selection of a parameter that controls the “promiscuity” of the reacting particles. In Eulerian models, measurement of this parameter may be difficult because its value will generally differ between natural (diffusion-limited) systems and batch experiments, even though both are modeled by reaction terms of the same form. And in Lagrangian models, there previously has been no a priori way to compute this parameter. In both cases, then, selection is typically done by calibration, or ad hoc. This paper addresses the parameter selection problem for Fickian transport by deriving, from first principles and D (the diffusion constant) the reaction-rate-controlling parameters for particle tracking (PT) codes and for the diffusion–reaction equation (DRE). Using continuous time random walk analysis, exact reaction probabilities are derived for pairs of potentially reactive particles based on D and their probability of reaction provided that they collocate. Simultaneously, a second PT scheme directly employing collocation probabilities is derived. One-to-one correspondence between each of D, the reaction radius specified for a PT scheme, and the DRE decay constant are then developed. These results serve to ground reactive transport simulations in their underlying thermodynamics, and are confirmed by simulations.     

吉林台网测震台站监测效能评估

由于种种原因,台站地震计的固有周期、阻尼、灵敏度、观测动态范围等参数和台基噪声在运行的过程中会发生变化。本文用阶跃标定和计算观测动态范围、台基噪声功率谱的方法,得到吉林测震台网各台站地震计参数和台基噪声的变化情况,掌握吉林测震台网各台站的监测能力,为以后吉林测震台网的建设和发展提出建议。     

A primary study of the variations of vertical radiation with the Beijing 325-m Meteorological Tower

The Beijing 325-m Meteorological Tower (325MT) is used to observe the vertical variation of solar radiation. Results of the experiments indicate that the automatic radiation monitoring system, including a sun tracker and data collection system, works well and all the specifications meet WMO observation standards. The measurement data show that there is a significant radiation decrease from 320m to the surface, where the difference is only about 30Wm^-2 on light air-pollution days, while the maximum reaches about 110Wm^-2 when heavy pollution appears near the ground. The global UV radiation decreases on heavy air-pollution days and under poor visibility conditions, and the difference between 300m and 8m is larger than on clear days.     

自动站测报系统软件及数据的备份

介绍自动站测报系统软件和数据文备份和恢复的经验方法。     

���������źŵķdz�ϫ��Ϣ�Զ���ȡ

???????EMD?????????????????ж????????????????????????????塢??????????????????仯????????????????????????????????????????о????????????????????????????????????????????????????????????????????????????????????????仯?????