Severe soil erosion during a 3‐day exceptional rainfall event: combining modelling and field data for a fallow cereal field

Exceptional rainfall events cause significant losses of soil, although few studies have addressed the validation of model predictions at field scale during severe erosive episodes. In this study, we evaluate the predictive ability of the enhanced Soil Erosion and Redistribution Tool (SERT‐2014) model for mapping and quantifying soil erosion during the exceptional rainfall event (~235 mm) that affected the Central Spanish Pyrenees in October 2012. The capacity of the simulation model is evaluated in a fallow cereal field (1.9 ha) at a high spatial scale (1 × 1 m). Validation was performed with field‐quantified rates of soil loss in the rills and ephemeral gullies and also with a detailed map of soil redistribution. The SERT‐2014 model was run for the six rainfall sub‐events that made up the exceptional event, simulating the different hydrological responses of soils with maximum runoff depths ranging between 40 and 1017 mm. Predicted average and maximum soil erosion was 11 and 117 Mg ha^?1 event^?1, respectively. Total soil loss and sediment yield to the La Reina gully amounted to 16.3 and 9.0 Mg event^?1. These rates are in agreement with field estimations of soil loss of 20.0 Mg event^?1. Most soil loss (86%) occurred during the first sub‐event. Although soil accumulation was overestimated in the first sub‐event because of the large amount of detached soil, the enhanced SERT‐2014 model successfully predicted the different spatial patterns and values of soil redistribution for each sub‐event. Further research should focus on stream transport capacity. Copyright © 2014 John Wiley & Sons, Ltd.     

Displacement analytical prediction of shallow tunnel based on unified displacement function under slope boundary

For slope condition of ground surface, the asymmetrical deformation about the vertical center line and the horizontal center line of the tunnel cross section can be formed. A unified displacement function expressed by the Fourier series is presented to express the asymmetrical deformation of the tunnel cross section. Five basic deformation modes corresponding to the expansion order 2 are a complete deformation mode to reflect deformation behaviors of the tunnel cross section under slope boundary. Such this complete displacement mode is implemented into the complex variable solution for analytically predicting tunneling-induced ground deformation under slope boundary. All of these analytical solutions are verified by good agreements of the comparison between the analytical solutions and finite element method results. A parameter study is carried out to investigate the influence of deformation modes of the tunnel cross section, geometrical conditions of the tunnel and the slope angle, and “Buoyancy effect” on the displacement field. Finally, the proposed method is consistent with measured data of the Hejie tunnel in China qualitatively. The presented solution can provide a simplified indication for evaluating the ground deformation under slope condition of ground surface.     

A DEVICE FOR MEASURING GULLY HEADWALL MORPHOLOGY

This paper describes a low-cost device for measuring the three-dimensional morphology of a gully headwall. The device was designed to operate in a gully system with the following characteristics: overhanging banks caused by a thick, dense root mat; retreat of the underlying unconsolidated sediments through small slab failures, leading to a considerable variation in retreat rate at each point on the headwall; and changes in the orientation of the headwall owing to changes in sediment properties and the topographical and hydrological controls of gully growth. The device is used to measure a series of closely spaced vertical profiles of the headwall, and the collected data are combined to draw a contour map showing the distance from the plane of the instrument to the headwall. Comparing maps for sequential times enables retreat rates for the diffferent proportions of the headwall to be quantified.     

陇中黄土高原丘陵沟壑区不同植被恢复模式下次降雨产流产沙特征

基于甘肃省清水县汤峪河径流小区2015—2017年的观测数据,研究不同植被恢复模式条件下坡面次降雨入渗、产流产沙特征。结果表明：不同植被恢复模式条件下的土壤入渗量与降雨强度呈二次函数关系,存在入渗量达到最大值的临界降雨强度。入渗速率与降雨历时可以用幂函数关系表达,符合考斯恰可夫入渗模型。不同植被恢复模式条件下的产流率在0.003 3~0.003 6 mm·min^-1之间,相对裸地的减流率为54%~58%。产流率与降雨强度之间呈二次函数关系（R²>0.88）,产流率的主要影响因素是降雨强度。径流含沙量平均值乔灌混合区（3.13 g·L^-1）>灌木林（2.95 g·L^-1）>乔木林（2.79 g·L^-1）>草地（2.58 g·L^-1）,径流含沙量与降雨强度呈线性递增函数关系。裸地的产沙量显著高于各植被小区（P<0.05）,是各植被小区的43~57倍,各植被小区的减沙率在93%~94%之间,减沙效益高于其减流效益。各植被坡面土壤流失量与降雨侵蚀力呈线性递增函数关系;产流率与侵蚀产沙率之间呈极显著正相关关系（P<0.01）,二者间可采用二次函数关系表达。本研究成果可为黄土高原丘陵沟壑区水土保持优化配置提供理论依据。     

黄土丘陵沟壑区典型村域土地利用变化及对区域乡村转型发展的启示

深入开展乡村地域土地利用变化和聚落发展规律的研究对于探究乡村地域系统优化、推进城乡融合与乡村可持续发展具有重要意义。论文以延安市碾庄流域为例,基于ENVI和GIS等软件技术,结合Landsat卫星影像、马尔科夫链模型和实地调查,从土地利用转移与交换变化、建筑用地空间转移、社会响应等角度探讨了黄土丘陵沟壑区典型村域土地利用变化特征以及对区域乡村发展转型的影响。研究表明：① 在一系列生态工程措施作用下,碾庄流域生态覆被发生明显改观,主要表现为大量的坡耕地及稀疏生态用地转化为林地,其中,林地面积占比由32.34%(2009年)增加至50.88%(2018年);② 在社会经济发展和延安新城“边缘效应”的影响下,碾庄建设用地呈现向流域的东南和西南方向拓展的趋势,10 a间建设用地面积增加了近75%;③ 在人类活动的主导作用下,黄土丘陵沟壑区的乡村正在朝着生态化和集约化的方向转型发展。研究结果有望为深入理解黄土丘陵沟壑区乡村地域系统结构和优化提供新参考。     

东北漫岗黑土区切沟侵蚀发育特征

随着人们对土壤侵蚀空间尺度认识的加深, 发育在更大空间尺度上的切沟愈来愈受到重视。切沟是土壤侵蚀的重要组成部分, 但现有的土壤侵蚀模型尚未包括切沟侵蚀部分。本研究利用高精度差分GPS, 在对东北典型漫岗黑土区切沟监测的基础上, 借助GIS 平台生成DEM, 通过DEM 的叠加分析, 探讨了沟内蚀积变化特征。并在此基础上, 提出了东北切沟侵蚀的概念模型, 认为冬春季冻融侵蚀产生沟内堆积-雨季径流产生侵蚀的过程可能是该区切沟发育的一种重要模式。     

东北典型丘陵漫岗区沟谷侵蚀动态及空间分析

以黑龙江省克山县为例,分析1954年和2000年侵蚀沟密度变化,探讨研究区土壤侵蚀的时空动态变化,并以侵蚀沟密度变化值为依据进行不同分区侵蚀因素的耦合分析。结果表明:过去46年间,克山县东南部侵蚀沟密度趋于减少,西北部侵蚀沟密度增大。1954～2000年侵蚀沟密度变化值在侵蚀减弱区与高程和坡度呈负相关,在侵蚀增强区呈正相关。随着坡长增加,侵蚀沟密度变化量呈增加趋势。侵蚀沟变化与坡长相关性最大,R²达0.9743,其次为高程,R²为0.6893,与坡度的相关性最小,R²为0.3437。结果表明,高程和坡度不是东北丘陵漫岗地区土壤流失的主要影响因子,坡长是该区侵蚀的一个重要影响因子。土地利用结构变化与土壤侵蚀强度变化密切相关,耕地面积大幅度增加与草地面积明显减少加速侵蚀沟发育。     

沟谷型沙漠泥流堆积体起动过程中的孔压变化特性

以黄河上游宁蒙段典型风水复合侵蚀流域为研究区域,重点针对堆积体堵塞沟道极端条件下的沟谷型沙漠泥流,从堆积体起动成灾的环节入手,开展直槽概化模型试验,并采用基于有效应力原理的流固耦合模型,概化模拟上游暴雨洪水入渗条件下堆积体内孔隙水压力变化特性及其起动过程,从微观角度揭示其成灾机理。结果表明：堆积体起动过程中孔隙水压力与时间呈指数为0.5的幂函数关系;流固耦合作用下堆积体内经历了应力场→体积应变→孔隙率→孔隙水压力→渗流场→塑性应变→屈服破坏的复杂非线性变化过程。     

元谋干热河谷浅沟测量方法比较与精度评价

为探究不同测量方法获取浅沟数据的精度,本文以元谋干热河谷区浅沟为例,采用RTK、三维激光扫描、近景摄影测量等多种测量方法获取浅沟数据,建立DEM并提取浅沟形态参数,对比近景摄影测量以不同方式获取标记坐标后建立DEM的差异,同时以测针板实测浅沟横剖面为参照,对比分析不同测量方法获取浅沟横剖面的精度。结果表明：RTK获取密度较低的点数据,建立的DEM较粗糙,仅体现沟缘大致走向;近景摄影测量+RTK方法测得的DEM高程整体低于近景摄影测量+全站仪所得DEM高程;利用三维激光扫描仪和近景摄影测量+全站仪两种方法获取数据所提取的浅沟形态参数精度较高;对比浅沟横剖面,横剖面近景摄影测量+全站仪测量所得与实测横剖面重合度较高。因此,利用近景摄影测量+全站仪进行浅沟测量,在精度、效率等方面优势较大。     

Suspended sediment transport regime in a debris‐flow gully on Vancouver Island,British Columbia

In debris‐flow‐prone channels, normal fluvial sediment transport occurs (nearly exclusively in suspended mode) between episodic debris‐flow events. Observations of suspended sediment transport through a winter season in a steepland gully in logged terrain revealed two event types. When flows exceeded a threshold of 270 l s⁻¹, events yielded significant quantities of sediment and suspended sediment concentration increased with flow. Smaller events were strongly ‘supply limited’; sediment concentration decreased as flow increased. Overall, there is no consistent correlation between runoff and sediment yield. Within the season, three subseasons were identified (demarcated by periods of freezing weather) within which a pattern of fine sediment replenishment and evacuation occurred. Finally, a signature of fine sediment mobilization and exhaustion was observed within individual events. Fine sediment transport occurred in discrete pulses within storm periods, most of the yield occurring within 5 to 15% of storm runoff duration, so that it is unlikely that scheduled sampling programs would identify significant transport. Significant events are, however, generally forecastable on the basis of regional heavy rainfall warnings, providing a basis for targeted observations. Radiative snowmelt events and rain‐on‐snow remain difficult to forecast, since the projection of temperatures from the nearest regular weather station yields variable results. Copyright © 2004 John Wiley & Sons, Ltd.