Mineralogical characteristics of polymetallic sulfides from the Deyin-1 hydrothermal field near 15°S,southern Mid-Atlantic Ridge

A seafloor hydrothermal field, named Deyin-1 later, near 15°S southern Mid-Atlantic Ridge(SMAR) was newly found during the 22 nd cruise carried out by the China Ocean Mineral Resources Research Development Association(COMRA). Sulfide samples were collected at three stations from the hydrothermal field during the26 th cruise in 2012. In this paper, mineralogical characteristics of the sulfides were analyzed with optical microscope, X-ray diffractometer, scanning electron microscope and electron microprobe to study the crystallization sequence of minerals and the process of hydrothermal mineralization. According to the difference of the ore-forming metal elements, the sulfide samples can be divided into three types:(1) the Ferich sulfide, which contains mainly pyrite and chalcopyrite;(2) the Fe-Cu-rich sulfide consisting predominantly of pyrite, chalcopyrite and isocubanite, with lesser amount of sphalerite, marmatite and pyrrhotine; and(3) the Fe-Zn-rich sulfide dominated by pyrite, sphalerite and marmatite, with variable amounts of chalcopyrite, isocubanite, pyrrhotine, marcasite, galena and gratonite. Mineral precipitations in these sulfides are in the sequence of chalcopyrite(isocubanite and possible coarse pyrite), fine pyrite,sphalerite(marmatite), galena, gratonite and then the minerals out of the dissolution. Two morphologically distinct generations(Py-I and Py-II) of pyrite are identified in each of the samples; inclusions of marmatite tend to exist in the coarse pyrite crystals(Py-I). Sphalerite in the Fe-Zn-rich sulfide is characterized by a"chalcopyrite disease" phenomenon. Mineral paragenetic relationships and a wide range of chemical compositions suggest that the environment of hydrothermal mineralization was largely changing. By comparison, the Fe-rich sulfide was formed in a relatively stable environment with a high temperature, but the conditions for the formation of the Fe-Cu-rich sulfide were variable. The Fe-Zn-rich sulfide was precipitated during the hydrothermal venting at relatively low temperature.     

基于物理特征的平面流场拓扑简化算法

基于网格合并思想实现的平面流场拓扑简化,存在物理特征被忽略和并行实现困难的问题,难以满足远程可视化的要求。文中提出1种基于物理特征的平面流场拓扑简化算法。算法通过计算生成平面流场的物理特征参数图像,利用图像分割提取平面流场的特征区域达到流场简化的目的。实验结果表明,算法能从物理特征和宏观的角度出发快速、准确描述平面流场的拓扑结构,为平面流场可视化提供了1种新方法。     

Geomechanical modelling to assess fault integrity at the CO2CRC Otway Project,Australia

This paper presents the first published 3D geomechanical modelling study of the CO2CRC Otway Project, located in the state of Victoria, Australia. The results of this work contribute to one of the main objectives of the CO2CRC, which is to demonstrate the feasibility of CO₂ storage in a depleted gas reservoir. With this aim in mind, a one-way coupled flow and geomechanics model is presented, with the capability of predicting changes to the in situ stress field caused by changes in reservoir pressure owing to CO₂ production and injection. A parametric study investigating the pore pressures required to reactivate key, reservoir-bounding faults has been conducted, and the results from the numerical simulation and analytical analysis are compared. The numerical simulation indicates that the critical pore fluid pressure to cause fault reactivation is 1.15 times the original pressure as opposed to 1.5 times for the comparable analytical model. Possible reasons for the differences between the numerical and analytical models can be ascribed to the higher degree of complexity incorporated in the numerical model. Heterogeneity in terms of lateral variations of hydrological and mechanical parameters, effect of topography, presence of faults and interaction between cells are considered to be the main sources for the different estimation of critical pore pressure. The numerical model, which incorporates this greater complexity, is able then to better describe the state of stress that acts in the subsurface compared with a simple 1D analytical model. Moreover, the reactivation pressures depend mainly on the state of stress described; therefore we suggest that numerical models be performed when possible.     

豫西南铅锌银矿集区深部构造与成矿作用

豫西南地区是我国中部重要的多金属成矿远景区,找矿前景巨大.本文中利用重力、航磁和深部地球物理剖面资料,解析研究区三维岩石圈结构,揭示深部构造特征,进而探讨深部成矿作用.结果表明,研究区莫霍面顶面形态基本上呈东高西低,地壳厚度由东向西增大.壳-幔结构的不均一性制约着成矿系统物质和能量的交换.矿集区位于幔向斜内,其地壳增厚处、莫霍面的梯度变化处或变形部位成矿强度大.幔背斜与幔向斜之间过渡带有走向超壳型深大断裂(如栾川断裂和朱阳关断裂),其与次级断裂的交汇处,岩浆、变质与成矿作用十分强烈,深部通道为成矿物质来源提供了较好的成矿条件,因此是形成大型、超大型矿床的有利地段.     

华南加里东期金矿床的基本特征

文章分析了安徽月山矿田夕卡岩型矿床形成过程中水岩作用的类型和特征。估算和讨论了水岩作用过程中的质量－体积变化和动力学问题。结论认为：水岩作用对流体成矿系统中夕卡岩和蚀变矿化作用的发生、发展，成矿流体的形成，成矿物质的富集，矿床定位等具有重要意义；水岩作用的水岩比值（W／R）小于0．1；夕卡岩和矿化蚀变分带是开放体系一系列溶解沉淀波反应前锋发生水岩反应后矿物和元素组合的时空分离的结果。     

吉林海沟金矿地质特征及应力场分析

海沟金矿是大型石英脉型金矿床,矿体严格受NE向断裂构造控制,成矿时代为晚侏罗世-早白垩世.矿石中金属矿物以黄铁矿、自然金、方铅矿和黄铜矿为主.28号主矿脉中,Au平均品位20.59×10-6.成矿物质来自地层和岩体.对构造应力场研究表明,矿区有3期构造应力场,分别是早期近S-N向挤压、中期NW向挤压和晚期NE向挤压.成矿期应力场最大主压应力方向为NE向.     

构造应力作用下流体运动的动力学分析——构造流体动力学

本文从流体动力学的基本规律出发,应用渗流力学、岩土力学及弹性力学的理论及方法,推导出了考虑应力状态的可变形介质中流体运动的动力学方程,由该方程可以看出：应力状态是影响流体运动的一个非常重要的因素,它通过３种方式来影响流体的运动,其一是：应力的作用改变介质的渗透性能,从而影响流体运动;其二是：平均正应力的变化速率影响介质的含流体能力,它以源汇项的形式反映在方程中;其三是：应力的作用影响流场的初始状态及边界状态,通过影响定解条件反映在动力学方程中,从而影响运动特征。构造应力场对流体运动的最终影响是这３方面作用     

改进的无网格法及其在冻土区桩基温度场中的应用

采用带权正交基函数对传统的无网格法中的基函数进行了改进,避免了计算过程中可能出现的矩阵不可逆情况,而且编程容易实现且计算效率高。并将其应用到冻土区桩基包括了热传导和相变潜热的温度场中,同时考虑了混凝土水化热释放对桩周冻土的影响,将计算结果和有限元计算结果及现场实测数据进行了比较分析,从趋势和最大数值看都反映了实测曲线的趋势,又把不同深度处桩侧和不同桩径处温度随时间的变化规律计算结果和有限元计算结果做了对比,都验证了该方法的可行性和优越性。     

湖南城步地区重力异常的初步研究

介绍了城步地区重力异常数据处理的几种方法,分析了重力异常及其位场转换后的特征,对重力异常进行了初步解释推断.根据重力异常特征,推断了10条断裂,圈定了兰蓉-谭家坳-照面山、黄坪、洞背和扛口等4处半隐伏岩体;结合地质地球化学综合信息,提出了4处找矿有利地段.通过半定量反演,认为:湖南省内苗儿山岩体与越城岭岩体以及五团岩体与苗儿山岩体在深部不相连.     

液压阻尼系统（HDS）控制立式钢制储罐地震响应分析

本文采用液压阻尼系统（HDS）控制立式圆柱钢制储罐的地震反应，建立了安装HDS储罐的力学分析模型，并进行了数值计算，从频域对安装HDS后储罐的地震响应进行了分析，研究了HDS的减震效果和HDS和HDS参数对储罐地震反应的影响。