承压井含水层孔隙度与固体骨架和水的体积压缩系数之间的关系

孔隙度和岩石压缩系数等方面的研究在评价油藏弹性产能和动态地质储量方面有重要的应用价值.结合国家地震前兆台网中心数据库8口井的数字化水位资料等, 研究了承压井含水层介质在不排水状态下的孔隙度、固体骨架的体积压缩系数和含水层内水的体积压缩系数.结果表明, 孔隙度与固体骨架的体积压缩系数和含水层内水的体积压缩系数间存在幂函数关系.在第1象限内, 各井含水层介质固体骨架的体积压缩系数随着孔隙度的增大而增大; 含水层内水的体积压缩系数随着孔隙度的增大而减小.固体骨架和含水层内水的体积压缩系数间满足一元二次多项式关系, 且含水层内水的体积压缩系数要比固体骨架的体积压缩系数大, 水更易压缩.另外, 灰岩骨架的压缩系数相对小于砂岩骨架的压缩系数.      

Controls on the genesis of a high-fluoride thermal spring: Innot Hot Springs,north Queensland *

This study reports on the source, evolution, reactions and environmental impacts of F-rich thermal water at Innot Hot Springs, north Queensland. Thermal water of the Innot Hot Springs has a surface temperature of 71°C, alkaline pH (8.1), low dissolved oxygen (0.61 mg/L) and low total dissolved solids (652 mg/L). The main chemical composition is Na – Cl, with F concentrations (16 mg/L) being comparatively high. Concentrations of alkali and alkali-earth metals (Cs, Li, Rb, Sr) are elevated, while those of other trace elements (Ag, Al, As, Ba, Be, Cr, Cu, Ga, Mn, Mo, U, Zn) are significantly less. Hydrochemical and stable isotope data of hot spring water show that the fluid is meteoric in origin and has undergone significant water – granite interaction. Common geothermometers suggest temperatures of water – rock interaction at depth in the 119 – 158°C range (corresponding to a depth of <3.9 – 5.2 km). Solubility modelling of the thermal fluid demonstrates that the evolution of F concentrations in spring waters at the discharge site can be accounted for by fluid – rock interaction of a H₂O – NaCl solution with fluorite – calcite-bearing granite assemblages between 150 and 200°C and subsequent granite-buffered cooling. Modelling also indicates that the F concentration in the hydrothermal system is largely controlled by interactions with fluorite, with less evidence for the significant involvement of F-topaz. Speciation calculations demonstrate that F speciation in the fluid is dominated by F^? (99.4%), followed by minor CaF⁺ (0.5%) and NaF_(aq) (0.1%), and traces of other F complexes. Thus, the F-rich Innot Hot Springs result from meteoric water circulating through fluorite-bearing granitic rocks and are the surface expression of a low-temperature, non-volcanic geothermal system. Discharge of the hot spring water occurs into an ephemeral stream located in a seasonally wet – dry tropical climate. As a result, the F content of local surface waters is distinctly elevated (max. 18 mg/L) during the dry season, making them unsuitable for stock water supplies.     

Origin and evolution of tufa mounds related to artesian karstic springs in Isona area (Pyrenees,NE Spain)

This work analyses a suite of relict tufa mounds generated by artesian karstic springs in Isona area (Spanish Pyrenees). Geological and geophysical data (seismics and vertical electrical resistivity soundings) indicate that the location of the discharge area in which the spring mounds formed was controlled by (1) a bulge in the axial zone of the anticline that affects the Areny-Montsec aquifer, with the consequent thinning of the overlying confining unit and (2) N-S and E-W trending extensional faults. These uncommon meteogene mounds occur in two stepped morphostratigraphic units that constitute the caprock of a mesa 9 km2 in area. The upper tufa complex is 47 m thick and has yielded several U/Th dates of >350 ka. The obtained U/Th ages for the mounds of lower tufa complex, 10 m thick, range from >350 to 214 ± 11 ka. The sedimentological analysis of the scarce exposures and electrical resistivity profiles show the same morphological and depositional components as those described in geothermal springs: (1) Cylindrical vents; (2) Pools fed by the vents and dammed by annular tufa barriers; (3) Tufa barriers (rimstones) constructed by overflowing waters through vertical accretion and progradation. These rimstones may have overhanging upflow sides. (4) Slope tufa facies with terracettes and microgours.     

Solute geothermometry of springs and wells of the Los Azufres and Las Tres Vírgenes geothermal fields,Mexico

Subsurface reservoir temperatures of two important Mexican geothermal systems (Los Azufres and Las Tres Vírgenes) were estimated by applying all available solute geothermometers for 88 and 56 chemical data measurements of the spring waters and fluids of the deep geothermal wells, respectively. Most of the chemical data for spring water of these two geothermal fields are for HCO₃ water, followed by SO₄ and Cl types. For the Los Azufres geothermal field (LAGF), the reservoir temperatures estimated by Na-K geothermometers for springs of HCO₃ and SO₄ waters, and by Na-Li and Li-Mg geothermometers for Cl water, are close to the average bottom-hole temperature (BHT) of the geothermal wells. However, all reservoir temperatures for spring waters from the Las Tres Vírgenes geothermal field (LTVGF) estimated by all solute geothermometers indicated significantly large differences (low temperatures) compared to the BHT. Evaluation of inferred reservoir temperatures for spring waters of the LAGF and LTVGF suggests that not all springs nor all solute geothermometers provide reliable estimation of the reservoir temperatures. Even though chemical equilibrium probably was not achieved in the water–rock system, Na-K geothermometers for HCO₃ water (peripheral water mainly of meteoric origin with little geothermal component) and SO₄ water (geothermal steam heated) and Na-Li and Li-Mg geothermometers for Cl-rich spring water (fully mature geothermal water) of the LAGF indicated reservoir temperatures close to the BHT. However, in comparison with the geothermometry of spring water of the LAGF and LTVGF, fluid measurements from geothermal wells of these two fields indicated reservoir temperatures in close agreement with their respective BHTs. For the best use of the solute geothermometry for spring water, it is advisable to: (1) chemically classify the springs based on water types; (2) identify and eliminate the discordant outlier observations by considering each water type as a separate sampled population; (3) apply all available solute geothermometers employing a suitable computer program such as SolGeo instead of using some specific, arbitrarily chosen geothermometers; and (4) evaluate the temperatures obtained for each solute geothermometer by considering the subsurface lithology, hydrological conditions, and BHTs or static formation temperatures whenever available.     

http://www.sciencedirect.com/science/article/pii/S1674987111001332

Isoprenoidal glycerol dialkyl glycerol tetraethers（iGDGTs） from the Gulu hot springs （23-83.6℃,pH>7） and Yangbajing hot springs（80—128℃,pH>7） were analyzed in order to investigate the distribution of archaeal lipids among different hot springs in Tibet.A soil sample from Gulu was incubated at different temperatures and analyzed for changes in iGDGTs to help evaluate whether surrounding soil may contribute to the iGDGTs in hot springs.The sources of bacterial GDGTs（bGDGTs） in these hot springs were also investigated.The results revealed different profiles of iGDGTs between Gulu and Yangbajing hot springs. Core iGDGTs and polar iGDGTs also presented different patterns in each hot spring.The PCA analysis showed that the structure of polar iGDGTs can be explained by three factors and suggested multiple sources of these compounds.Bivariate correlation analysis showed significant positive correlations between polar and core bGDGTs.suggesting the in situ production of bGDGTs in the hot springs.Furthermore,in the soil incubation experiment,temperature had the most significant influence on concentration of bGDGTs rather than iGDGTs.and polar bGDGTs had greater variability than core bGDGTs with changing temperature.Our results indicated that soil input had little influence on the composition of GDGTs in Tibetan hot springs. On the other hand,ring index and TEX₈₆ values were both positively correlated with incubation temperature, suggesting that the structure of archaeal lipids changed in response to varying temperature during incubation.     

Carbon isotopes in the rivers from the Lesser Antilles: origin of the carbonic acid consumed by weathering reactions in the Lesser Antilles

In this paper, we use carbon isotopes in the dissolved load of rivers from the Lesser Antilles volcanic arc (Guadeloupe, Martinique and Dominica islands) to constrain the source of the carbon dioxide (CO₂) involved in the neutralization reactions during water–rock interactions. The δ¹³C data span a large range of variations, from –19‰ to –5 · 2‰ for DIC (dissolved inorganic carbon) concentrations ranging from 11 μM to 2000 μM. Coupled with major element concentrations, carbon isotopic ratios are interpreted as reflecting a mixture of magmatic CO₂ (enriched in heavy carbon (δ¹³C ≈ –3 · 5‰) and biogenic CO₂ produced in soils (enriched in light carbon (δ¹³C < –17‰)). Carbon isotopes show that, at the regional scale, 23 to 40% of CO₂ consumed by weathering reactions is of magmatic origin and is transferred to the river system through aquifers under various thermal regimes. These numbers remain first‐order estimates as the major uncertainty in using carbon isotopes as a source tracer is that carbon isotopes can be fractionated by a number of processes, including soil and river degassing. Chemical weathering is clearly, at least, partly controlled by the input of magmatic CO₂, either under hydrothermal (hot) or surficial (cold) weathering regimes. This study shows that the contribution of magmatic CO₂ to chemical weathering is an additional parameter that could explain the high weathering rates of volcanic rocks. The study also shows that a significant part of the carbon degassed from the Earth's interior is not released as CO₂ to the atmosphere, but as DIC to the ocean because it interacts with the groundwater system. This study calls for a better understanding of the contributions of deep carbon to the hydrosphere and its influence on the development of the Critical Zone. Copyright © 2013 John Wiley & Sons, Ltd.     

Formation of phreatic caves in an eogenetic karst aquifer by CO2 enrichment at lower water tables and subsequent flooding by sea level rise

Formation of extensive phreatic caves in eogenetic karst aquifers is widely believed to require mixing of fresh and saltwater. Extensive phreatic caves also occur, however, in eogenetic karst aquifers where fresh and saltwater do not mix, for example in the upper Floridan aquifer. These caves are thought to have formed in their modern settings by dissolution from sinking streams or by convergence of groundwater flow paths on springs. Alternatively, these caves have been hypothesized to have formed at lower water tables during sea level low‐stands. These hypotheses have not previously been tested against one another. Analyzing morphological data and water chemistry from caves in the Suwannee River Basin in north‐central Florida and water chemistry from wells in the central Florida carbonate platform indicates that phreatic caves within the Suwannee River Basin most likely formed at lower water tables during lower sea levels. Consideration of the hydrological and geochemical constraints posed by the upper Floridan aquifer leads to the conclusion that cave formation was most likely driven by dissolution of vadose CO₂ gas into the groundwater. Sea level rise and a wetter climate during the mid‐Holocene lifted the water table above the elevation of the caves and placed the caves tens of meters below the modern water table. When rising water tables reached the land surface, surface streams formed. Incision of surface streams breached the pre‐existing caves to form modern springs, which provide access to the phreatic caves. Phreatic caves in the Suwannee River Basin are thus relict and have no causal relationship with modern surficial drainage systems. Neither mixing dissolution nor sinking streams are necessary to form laterally extensive phreatic caves in eogenetic karst aquifers. Dissolution at water tables, potentially driven by vadose CO₂ gas, offers an underappreciated mechanism to form cavernous porosity in eogenetic carbonate rocks. Copyright © 2012 John Wiley & Sons, Ltd.     

地下水监测工程承压-自流监测井密封技术

针对地下水监测工程施工中面临的承压-自流监测井密封、监测、取样、洗井等紧迫难题,研发了承压-自流监测井密封技术。该技术是在监测井管口安装一个具有多个功能组件的密封不锈钢盖板来实现自流监测井长期监测的各项需求。本文介绍了承压-自流监测井密封技术原理、系统组成和安装流程及方法。通过山西忻州市地下水监测井现场示范及其他地区50余口井的工程应用,证实该技术可有效解决自流监测井井口密封、水样采集、洗井清淤和维护探头等一系列问题,具有密封效果好、不污染水质、操作便捷和成本低等优点,可实现不同特征自流监测井地下水数据长期自动采集与传输,并可为类似井的封孔工作提供解决思路。     

文登市地热资源现状及开发建议

文登市地热温泉资源丰富,且开发历史悠久。为更好地保护开发地热资源,文登市国土资源局确立了＂有效节约和保护矿产资源,加强地热资源开发利用管理,打造中国温泉之都,构建资源节约型、环境友好型社会＂的指导思想。在充分考虑区域温泉地质条件、资源勘查程度、温泉水质量及其开发利用现状的基础上,结合规划区内各地段产业结构特点、地理条件、经济发展水平及未来产业结构调整方向,按照走集约化开发、规模化发展的总体思路,全面整顿和规范文登地热资源开发秩序。通过强化温泉资源开发审批、建立勘查开发利用投入机制、加强温泉资源的勘查与保护工作和加大查处力度等措施,全面提升了地热资源开发利用水平。