Sediment infiltration traps: their use to monitor salmonid spawning habitat in headwater tributaries of the Cascapédia River,Québec

Sediment infiltration can clog salmon nests and reduce egg survival. As a countermeasure, environmental managers often deploy infiltration traps to monitor sediment infiltration. Traps provide a repeatable means of measuring infiltration and enable comparisons to be made between sites. Results from infiltration rates measured with traps have also been used to estimate infilling rates into salmon nests. Application of these data is questionable, as the composition of the bed and the amount of fine sediment within the bed is known to affect infiltration rates. Thus, infiltration rates measured with infiltration traps may differ from the infiltration rates occurring in redd and riffle gravels. To examine how relationships between sediment infiltration rates varied between four watersheds, we continuously monitored suspended sediment transport, shear stress and infiltration rates at four sites over 5 months. We also compared infiltration rates measured with infiltration traps with changes in the hydraulic conductivity and subsurface grain size distribution of adjacent artificially constructed salmon nests and natural riffle gravels. Among the four watersheds, clear differences in sediment infiltration rates were observed. The differences correlated with the subsurface silt content but no strong relationship existed between land‐use or basin physiography/geology. Despite observing an average of 30 kg m⁻² of sediment finer than 2 mm being deposited in the infiltration traps during the study, no change in redd or riffle substrate was observed. If the deposition rates measured with the traps reflect the processes in redds, enough sediment would have been deposited to inhibit egg emergence. However, no reduction in egg survival to the eyed stage was observed. In summary, our results show that infiltration traps with clean gravels can be used to detect intersite differences in sediment transport regimes. Extrapolations of sediment infiltration rates measured with such collectors to estimate infiltration rates in redds or riffles is, however, flawed. Copyright © 2005 John Wiley & Sons, Ltd.     

Towards developing sediment quality assessment guidelines for aquatic systems: An Australian perspective

Sediment at the sediment‐water interface of natural and man‐made waterways forms an integral part of the ecosystem because it is affected by a continuous flux of physical, chemical and biological components between the sediment, interstitial water and the overlying water column. Aquatic sediments contain records of past and present urban and rural runoff, chemical discharges and spills. In recent years sediment quality has received increasing attention following identification of the role of sediment as both a sink for pollutants and as a contaminant source with potential impacts on the quality of receiving waters. Research has indicated that the processes leading to remobilization of contaminated sediments in upstream reaches of a waterway may, through time, exert a significant influence on water quality in the downstream reaches. This, together with the cumulative effects due to contaminant input from point and non‐point source discharges, have dramatic effects on water quality and thus on ecosystem structure and functioning.

The problems associated with elevated concentrations of many hazardous organic and inorganic compounds have resulted in the establishment of aquatic sediment quality criteria and management guidelines in many overseas countries, with the objectives being the reduction and elimination of adverse environmental effects and human health risks associated with contaminated sediments. Whereas more than 70% of the Australian population is clustered around the coastal waterways, little is known about the role of sediments as a repository of environmental pollutants and/or as a source of adverse impacts on water quality and the health of our rivers. The paucity of knowledge on the quality of aquatic sediment highlights the need for the development of coherent guidelines for sediment quality assessment and management of contaminated sites, which are consistent with Australian environmental conditions and land use features.

A comparative evaluation of sediment quality information from eight coastal rivers along the east coast of Australia, presented in this paper, indicates the possibility for establishing a framework for regional sediment quality assessment. This may be achievable by using textural and compositional attributes of bottom sediments in depositional areas to develop databases on the loading and concentration trends of nutrients and contaminants. Regional variability in sediment quality determinants are shown to reflect the influence of catchment hydrology, lithology and land use on nutrient and contaminant concentration trends. Locally, the loading and partitioning behaviour of sediment‐bound contaminants is largely controlled by the nature and the extent of interactions occurring at the sediment‐water interface within individual depositional units.

The concept of ‘Sediment Effect Zone’ is introduced to provide a compartmental approach to the characterization of aquatic sediments and depositional environments in different hydrologic zones. This approach offers a rational basis for follow‐up chemical and biological assessments to establish sediment quality standards and management guidelines. Because of the complex influences of environmental, methodological and statistical factors on defining the sediment variability, the need for implementing proper quality control measures from early stages of design of a sediment quality assessment program is highlighted.     

Influence of Temporal Variations in River Discharge, pH, Alkalinity and Ca on the Speciation and Concentration of Heavy Metals in Some Mining Polluted Rivers

Dissolved (dialysis in situ) and total concentrations ofCu, Zn, Cd and Al in eight mining polluted rivers in the Røros area, central Norway, were determinedby atomic absorption spectrometry (flame and graphite furnace) and compared to pH, Caconcentration and alkalinity through seasonal variations in river discharge. Totalconcentrations of the metals were highest during early spring flood and during summer andautumn rain episodes. Dissolved concentrations also increased as the spring floodproceeded, but small discharge peaks within this 2 month period as well as a considerableautumn flood episode appeared to lower rather than to raise the dissolved metal concentrations.Consequently the dissolved fractions of Zn, Cd and Al showed a significant negative correlationwith river discharge, and were low at the discharge peaks. Possibly high sediment concentrationsoccurring at high flood conditions more than counteracted desorption induced by pHdecrease, and led to decreased dissolved fractions through adsorption. Cu speciationon the other hand seemed to be more closely linked to pH. Alkalinity and Ca concentration,both assumed to protect aquatic life from metal pollution, were significantly lowerduring episodes with high Cu and Al total concentrations.     

云南白水台钙华水池中水化学日变化及其生物控制的发现

为弄清云南白水台泉及其下游钙华水池中水化学的日变化,选取1号泉及其流经的两个钙华水池(6号和10号)作为研究对象并对其水温、pH值和电导率进行了自动监测。根据Ca2 、HCO3-与电导率存在的线性关系,用WATSPAC软件计算了水中方解石的饱和指数和PCO2。监测发现:泉水不存在显著的水化学日动态变化,而两个钙华水池表现出显著的日动态变化。其中10号钙华水池在白天温度较高时水中的CO2大量逸出并通过水下水生植物的光合作用加速了水中碳酸钙的沉积。6号钙华水池水生植物生长茂盛,其叶片和部分枝干露出水面,因而光合作用主要发生在空中,所以此处水化学表现为白天pH值降低和电导率升高的反常现象,即由温度主导的根呼吸作用,在白天释放更多的CO2进入水体而使沉积下来的碳酸钙重新溶解。     

用离子色谱法测定金矿区水样中常规无机离子

利用DX－120离子色谱仪进行阴阳离子的精密度和准确度测定，100mg/L时相对标准偏差范围为1．00％－3．80％，回收经95．83％－105．00％；5mg／L时相对标准偏差范围为1．18％－4．57％，回收率92．40％－103．20％，完全达到实际要求。用该离子色谱仪测定甘肃阳山金矿山水样中常规无机离子，数据表明该区域水质较好，所测离子浓度都未超过饮用水标准。     

水资源中氯代烃污染物的去除方法

随着工业化的发展。氯代有机溶剂使用越来越广泛。并且难于去除。在20世纪90年代初期，人们就已认识到用Fe^0恢复污染的地下水的潜力。国外正在研究帮使用扔几种还原挥发性氯代烃的还原反应介质，尤其要提高的是双金属反应系统，反应速度快，而且脱Cl中国难解产物少，目前国也只停留在实验室研究阶段，个别做了地上反应器的验证实验，它的脱Cl机理、介质钝化和完全脱Cl问题还有待于进一步研究。     

Empirical predictors of annual bed load travel distance,and implications for salmonid habitat restoration and protection

Measurements of annual travel distance (L_b) of bed load sediment at 16 locations in Alaska, the intermountain USA, west coast USA and Scotland are strongly correlated with bankfull channel width (r² = 0·86, p < 0·001). Travel distance of particles is probably limited by trapping in bars, which have a longitudinal spacing proportional to channel width. Increased abundance of woody debris reduces bar spacing and may reduce L_b. Longer cumulative duration of bed load transporting flows in a year appears to increase L_b. Other predictors of annual travel distance such as stream power per unit length, drainage area and bankfull discharge were less well correlated with L_b (r² ranging from 0·27 to 0·51). Stream power per unit bed area, basal shear stress and slope were not significantly related to L_b (r² < 0·05). Most correlations were improved when regressions were limited to data from the west coast USA. Travel distance estimates can be used to help identify reaches that may take longer to recover from large, short‐term increases in sediment supply. Published in 2001 by John Wiley & Sons, Ltd.     

Assessment of flow–ecology relationships for environmental flow standards: a synthesis focused on the southeast USA

ABSTRACT

Environmental flow standards are a management tool that can help to protect the ecosystem services sustained by rivers. Although environmental flow requirements can be assessed using a variety of methods, most of these methods require establishing relationships between flow and habitat of species of concern. Here, we conducted a synthesis of past flow–ecology studies in the southeast USA. For each state or interstate river basin, we used the published data to determine the flow metrics that resulted in the greatest changes in ecological metrics, and the ecological metrics that were most sensitive to hydrologic alteration. The flow metrics that were most important in preserving ecological metrics were high-flow duration and frequency, 3-day maximum and minimum, and number of reversals. The ecological metrics most sensitive to hydrologic alteration were mostly related to presence or absence of key indicator species.     

Bed waves at the basin scale: implications for river management and restoration

An extensive literature about fluvial sediment waves, slugs or pulses has emerged in the past 20 years. The concept has been useful in many respects, but has been applied to diverse phenomena using a variety of definitions. Moreover, inferred linkages between channel‐bed changes and sediment loads are often not justifiable. This paper reviews concepts of large fluvial sediment waves at scales extending to several tens of kilometres. It points out constraints on the inferences that can be made about sediment loads based on changes in channel‐bed elevation at this scale where channel sediment interacts with storage in floodplain and terrace deposits. The type area of G. K. Gilbert's initial sediment‐wave concept is re‐examined to show that neither wave translation nor dispersion occurred in the simple manner commonly assumed. Channel aggradation and return to graded conditions provide an alternative theory explaining Gilbert's observed bed‐elevation changes. Recognizing the evidence and implications of the former passage of a large‐scale bed wave is essential to the accurate diagnosis of catchment conditions and the adoption of appropriate river restoration goals or methods. Sediment loads, water quality, channel morphologic stability and aquatic ecosystems often reflect changes in sediment storage long after the channel bed has returned to grade. Copyright © 2006 John Wiley & Sons, Ltd.