罕见的蓝色饵-纳透闪石研究

尽管角闪石在地壳中大量存在 ,但是蓝色钾 钠透闪石却是角闪石中的稀有品种。本文采用X射粉晶线衍射和晶胞参数计算 ,确定该矿物为蓝色的钾 钠透闪石 ,用电子探针 (EMPA)精确分析了它的化学成分 ,确定为钾 钠透闪石 ,而不是蓝色软玉 (即不是透闪石或阳起石 )。     

北秦岭灰池子花岗岩基成岩物质来源探讨

本文主要通过Ｎｄ，Ｓｒ和Ｏ同位素示踪研究，分析了灰池子花岗岩基的成岩物质来源，初步查明该岩体的岩浆源区由６９％的地幔物质和３１％的陆壳物质混合而成，属壳幔型花岗岩。     

冬季青藏高原大气热状况分析Ⅱ：年际变化

通过诊断3套再分析资料的非绝热加热场,研究冬季青藏高原上空大气的热力特征.结果表明,与夏季为强热源的特征不同,冬季高原上空不是欧亚大陆上最强的冷源中心.冬季高原上空整体是偏弱的冷源,在高原西侧及东南地区上空甚至出现非绝热加热正值区,这一分析对以往研究提出的高原是冷源的特性给出了修正.各种非绝热加热分量的诊断表明,冬季高原上空这种总的非绝热加热分布主要是由于高原主体的长波辐射冷却较周边地区弱,以及西侧至东南地区凝结潜热释放造成的.为了说明再分析的非绝热加热资料对冬季高原上空大气的这种热力特征描述的可信性,文中还利用了地表辐射能量、TRMM及PREC/L降水、垂直速度等资料进一步辅助分析,证实了由于高原位势较高造成大气整层温度偏低,向外长波辐射偏少,以及高原地势的隆起造成局地较强的上升运动,高原西侧至东南角降水大值区潜热偏大,最终造成高原上空总非绝热加热负值偏小.最后理想高原隆起的水球试验结果说明,冬季,高原的存在减弱了陆地上空的冷却效应,因而其上为弱冷源,再次证实了资料分析的结果.     

湘东北燕山期陆内碰撞造山带金多金属成矿地球化学

文章采用微量元素(包括稀土元素)地球化学示踪方法，着重讨论了金大规模成矿的物质来源、含矿流体来源及含矿流体运移的能量问题。认为湘东北地区金多金属矿床成矿物质和含矿流体具多来源，大规模花岗质岩浆活动能为成矿元素的活化和成矿流体运移提供巨量能源；成矿物质一部分源于深部含矿热液，可能与富铅、富氯、中高温(320℃左右)、相对还原的酸性环境下的气成热液有关，而冷家溪群及相关地层金多金属成矿物质在热液活动和动力变质作用下的活化迁移有利于金多金属的大规模成矿。侏罗纪以来，岩石圈地球动力学转折及伴随的热液作用和动力变质作用对区内金多金属成矿起重要的作用，而岩浆作用、动力作用和/或热液活动影响程度的可能差异，导致了金多金属矿床具有不同的成矿特点。     

Tracing suspended sediment and particulate phosphorus sources in catchments

Information on suspended sediment and particulate P (PP) sources is an important requirement in many catchment-based diffuse source pollution studies, in order to assist with model validation and to provide information to support the development of effective sediment and phosphorus control strategies. Such information is, however, frequently unavailable or difficult to assemble. In the study reported, source fingerprinting procedures were successfully used to assemble this information for seven sub-catchments in the Hampshire Avon catchment and five sub-catchments in the Middle Herefordshire Wye catchment. The results provide important new information on the relative importance of the contributions from surface and channel/subsurface sources to the suspended sediment and PP fluxes from the catchments. In the Wye sub-catchments channel/subsurface sources contributed 40–55% of the overall suspended sediment flux and 21–43% of the PP flux from the catchments. Equivalent values for the Avon were 1–41% and 1–54%, respectively. Combination of the information on the relative importance of surface and channel/subsurface sources with measured suspended sediment fluxes has provided the first estimates of the specific fluxes of sediment and PP attributable to channel/subsurface sources for UK catchments. The former are as high as 15–20 t km⁻² year⁻¹ in some of the Wye sub-catchments, whereas the latter exceeded 0.1 kgP ha⁻¹ year⁻¹ in the same sub-catchments. The results emphasize the need to take account of potential contributions from channel/subsurface sources when using measured suspended sediment and PP flux data to validate predictions derived from models incorporating only surface contributions.     

Quantifying preferential flow in soils: A review of different techniques

Preferential flow (PF) in soil has both environmental and human health implications since it favours contaminant transport to groundwater without interaction with the chemically and biologically reactive upper layer of soil. PF is, however, difficult to measure and quantify. This paper reviews laboratory and field techniques, such as breakthrough curves, dye tracing, and scanning techniques, for evaluating PF in soil at different scales. Advanced technologies, such as scanning techniques, have increased our capability to quantify transport processes within the soil with minimal soil disturbance. Important issues with respect to quantifying PF concern large-scale studies, frozen soil conditions, tracing techniques for particles and gases, a lack of simple mathematical tools for interpreting field data, and the lack of a systematic approach for comparing PF data resulting from different measurement techniques. Also, more research is required to quantify the relative importance of the various PF processes that occur in soil rather than the integrated result of all PF processes in soils.     

Sediment routing hypothesis for pool‐riffle maintenance

This paper provides comprehensive evidence that sediment routing around pools is a key mechanism for pool‐riffle maintenance in sinuous upland gravel‐bed streams. The findings suggest that pools do not require a reversal in energy for them to scour out any accumulated sediments, if little or no sediments are fed into them. A combination of clast tracing using passive integrated transponder (PIT) tagging and bedload traps (positioned along the thalweg on the upstream riffle, pool entrance, pool exit and downstream riffle) are used to provide information on clast pathways and sediment sorting through a single pool‐riffle unit. Computational fluid dynamics (CFD) is also used to explore hydraulic variability and flow pathways. Clast tracing results provide a strong indication that clasts are not fed through pools, rather they are transported across point bar surfaces, or around bar edges (depending upon previous clast position, clast size, and event magnitude). Spatial variations in bedload transport were found throughout the pool‐riffle unit. The pool entrance bedload trap was often found to be empty, when the others had filled, further supporting the notion that little or no sediment was fed into the pool. The pool exit slope trap would occasionally fill with sediment, thought to be sourced from the eroding outer bank. CFD results demonstrate higher pool shear stresses (τ ≈ 140 N m^–2) in a localized zone adjacent to an eroding outer bank, compared to the upstream and downstream riffles (τ ≈ 60 N m^–2) at flows of 6 · 2 m³ s^–1 (≈ 60% of the bankfull discharge) and above. There was marginal evidence for near‐bed velocity reversal. Near‐bed streamlines, produced from velocity vectors indicate that flow paths are diverted over the bar top rather than being fed through the thalweg. Some streamlines appear to brush the outer edge of the pool for the 4 · 9 m³ s^–1 to 7 · 8 m³ s^–1 (between 50 and 80% of the bankfull discharge) simulations, however complete avoidance was found for discharges greater than this. Copyright © 2013 John Wiley & Sons, Ltd.     

PS转换波界面二次源法射线追踪

界面二次源法是最近提出的一种最小走时射线追踪方法,尤其适合层状介质中走时和射线路径的计算.该方法相对于传统的最小走时树方法（如Moser法）,仅在物性界面上设置二次源,射线路径的方向只在层界面处发生改变,该方法最大程度地消除了射线路径的锯齿状现象,同时也避免了低变速区的射线路径多值现象,因此,它具有更高的追踪精度和效率.本文采用界面二次源法在各向同性介质中实现了PS转换波射线追踪,理论模型的计算证实了界面二次源法追踪PS转换波的准确性和高效性,同时该方法在各向异性介质中也很好地追踪出分离的PSV波和PSH波,因此该方法有利于横波分裂在地震勘探中的研究和应用     

利用重复地震P波走时差观测地壳介质的微动态

基于研究区域地震震相到时资料及地震波数据,给出了两个局部地区地壳介质微动态变化的实例。一个是汶川8.0级地震起始破裂区域,即A区;另一个是三岔口地区,即B区,该区域为活动断裂交汇部位,未发生过大地震,但近年来中小地震频繁。分析A区后发现,在汶川8.0级地震前,部分台站观测的地壳介质微动态出现了中短期异常,震源区正东及北东方向波速升高,反映出地壳介质受到显著挤压而处于硬化阶段;震源区西南方向的波速则比较稳定。分析B区后发现,可能受到汶川8.0级地震的影响,部分台站给出的计算结果在地震前后发生了变化,显示出不同方位地壳介质承压状态的差异。     

三维地质模型中地震波共轭梯度非线性走时反演

地震体波走时层析成像是探测地球内部速度结构的重要方法之一。基于三维块状建模以及三角形拼接的界面描述方式,结合快速高效的逐段迭代射线追踪方法,获得三维复杂地质模型中的地震射线路径与走时信息,采用共轭梯度非线性反演算法,进行地震波走时反演。实验结果表明共轭梯度反演算法在三维层状模型中具有较高的有效性。