河北怀来ML4.4地震前的地热异常

2002年8月3日15时57分在河北怀来发生了ML4．4地震，在震中距100km范围内的4个台站，三马坊、赤城、矾山、张家口台数字化地热观测均有一定的异常反映，其中，三马坊、赤城台有较明显的临震异常。介绍了各台的地热观测情况，利用差分法、减组合滤波等非潮汐方法进行了分析，指出，该震例总结对今后的地震监测和预报有一定的借鉴和参考作用。     

Curie-point depth from spectral analysis of magnetic data in central-southern Europe

The basal depth of the outer layer with internal magnetic sources was calculated from magnetic data available within a roughly 500 km wide and 1200 km long area, running from central Germany to southern Italy. The dataset, deriving from different aeromagnetic surveys, is reduced to the reference altitude of 3000 m a.s.l. and a reference year of 1980.0. The adopted method, which transforms the spatial data into the frequency domain, provides a relationship between the two-dimensional spectrum of the magnetic anomalies and the top and centroid depths of the magnetic sources. The magnetic layer bottom depth (MLBD) thus obtained is 29-33 km deep in the stable areas (central Europe Variscan units, Corsica-Sardinia Variscan block) and corresponds to the Moho, having an average temperature of 560 °C. From the Alps to the Apennines, MLBD ranges between 22 and 28 km and is clearly shallower than the Moho. In these units, the wide variation of MLBD appears to be compatible with the presence of shallow magnetised bodies, consisting of lower crustal rocks (Ivrea-Verbano zone), ophiolitic units (Penninic zone and Voltri Massif) and intrasedimentary basic volcanic bodies (Po Basin). An average value of 25 km can be attributed to MLBD, which corresponds to a temperature of 550 °C. In the peri-Tyrrhenian zone and the Ligurian Sea, MLBD is below the Moho, which ranges from 17 to 20 km depth, and it has a temperature matching approximately to the Curie temperature of magnetite (580 °C).     

Two contrasted P–T–time paths of coronitic metanorites of the French Massif Central: are reaction textures reliable guides to metamorphic histories?

Metanorites from two eclogitized metagabbros of the Hercynian French Massif Central preserve coronitic textures of hornblende, garnet, quartz and/or kyanite produced at the expense of the primary magmatic assemblage orthopyroxene and plagioclase. Using a petrogenetic grid in the CFMASH system, two possible P–T evolutions for the origin of the coronas are evaluated. The sequence of reactions involving the formation of Hbl (–Ky) ± Grt and Qtz coronitic assemblages is consistent with an isobaric cooling at high pressure (c. 1–2 GPa) under hydrated conditions. However, this P–T path, inferred by using only petrographical observations, is inconsistent with the geochronological constraints: emplacement of the gabbro at 490 Ma and high‐pressure metamorphism at 410 Ma. In order to reconcile petrographical observations with geochronological constraints, we propose a discontinuous two‐stage evolution involving a change in water activity with time. (1) Emplacement and cooling of the norite at low pressure under anhydrous conditions, at 490 Ma. (2) During the Hercynian orogeny, the norite experienced an increase in pressure and temperature under fluid‐present conditions. Adding water to the system implies a dramatic change in the petrogenetic grid topology, restricting the orthopyroxene–plagioclase assemblage only to high temperatures. Therefore, the breakdown of the unstable magmatic assemblage, through apparent retrograde reactions, occurred along the prograde P–T path which never crossed the equilibrium boundaries of these reactions.     

Reaction localization and softening of texturally hardened mylonites in a reactivated fault zone, central Argentina

The Tres Arboles ductile fault zone in the Eastern Sierras Pampeanas, central Argentina, experienced multiple ductile deformation and faulting events that involved a variety of textural and reaction hardening and softening processes. Much of the fault zone is characterized by a (D2) ultramylonite, composed of fine‐grained biotite + plagioclase, that lacks a well‐defined preferred orientation. The D2 fabric consists of a strong network of intergrown and interlocking grains that show little textural evidence for dislocation or dissolution creep. These ultramylonites contain gneissic rock fragments and porphyroclasts of plagioclase, sillimanite and garnet inherited from the gneissic and migmatitic protolith (D1) of the hangingwall. The assemblage of garnet + sillimanite + biotite suggests that D1‐related fabrics developed under upper amphibolite facies conditions, and the persistence of biotite + garnet + sillimanite + plagioclase suggests that the ultramylonite of D2 developed under middle amphibolite facies conditions. Greenschist facies, mylonitic shear bands (D3) locally overprint D2 ultramylonites. Fine‐grained folia of muscovite + chlorite ± biotite truncate earlier biotite + plagioclase textures, and coarser‐grained muscovite partially replaces relic sillimanite grains. Anorthite content of shear band (D3) plagioclase is c. An30, distinct from D1 and D2 plagioclase (c. An35). The anorthite content of D3 plagioclase is consistent with a pervasive grain boundary fluid that facilitated partial replacement of plagioclase by muscovite. Biotite is partially replaced by muscovite and/or chlorite, particularly in areas of inferred high strain. Quartz precipitated in porphyroclast pressure shadows and ribbons that help define the mylonitic fabric. All D3 reactions require the introduction of H⁺ and/or H₂O, indicating an open system, and typically result in a volume decrease. Syntectonic D3 muscovite + quartz + chlorite preferentially grew in an orientation favourable for strain localization, which produced a strong textural softening. Strain localization occurred only where reactions progressed with the infiltration of aqueous fluids, on a scale of hundreds of micrometre. Local fracturing and microseismicity may have induced reactivation of the fault zone and the initial introduction of fluids. However, the predominant greenschist facies deformation (D3) along discrete shear bands was primarily a consequence of the localization of replacement reactions in a partially open system.     

Use of fallout 137Cs for documenting the chronology of overbank sediments from the river Sava, Croatia, and interpreting their geochemical patterns

This paper attempts to determine the impact of former Pb-Zn-Ba mining activities in Slovenian drainage basin on overbank sediments of the Sava river (West Croatia). Among the four studied sequences (S7, S8, S9, S10), the most upstream profile S7 showed the most pronounced impact of ore mining. Mercury was enriched more than 100-fold; Pb and Zn had a strong positive correlation (r > 0.99). Two factor models clearly revealed the Pb-Ba-Hg association in the lower-lying carbonate (CA) population of all four profiles, but only in the overlying silicate (SI) population of profile S7. Factor analysis confirmed this association in the total sediment (90 samples) as well as separately in the CA (33 samples) and SI (57 samples) populations. Based on a comparison with an undisturbed soil profile, the vertical distribution of ¹³⁷Cs in profile S7 was interpreted to be the combination of caesium deposition caused by a flood in 1964 and by post-depositional redistribution.     

Fractally Invariant Distributions and an Application in Geochemical Exploration

Fractal modelling has been applied extensively as a means of characterizing the spatial distribution of geological phenomena that display self-similarity at differing scales of measurement. A fractal distribution exists where the number of objects exhibiting values larger than a specified magnitude displays a power-law dependence on that magnitude, and where this relationship is scale-invariant. This paper shows that a number of distributions, including power-function, Pareto, log-normal and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. Population limits, derived from fractal modelling using a summation method, are compared with those derived from more conventional probability plot modelling of stream sediment geochemical data from north-eastern New South Wales. Despite some degree of subjectivity in determining the number of populations to use in the models, both the fractal and probability plot modelling have assisted in isolating anomalous observations in the geochemical data related to the occurrence of mineralisation or lithological differences between sub-catchments. Thresholds for the main background populations determined by the fractal model are similar to those established using probability plot modelling, however the summation method displays less capacity to separate out anomalous populations, especially where such populations display extensive overlap. This suggests, in the geochemical data example provided, that subtle differences in the population parameters may not significantly alter the fractal dimension.     

A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantitative estimation of submarine groundwater discharge using airborne thermal infrared data acquired at two different tidal heights

Submarine groundwater discharge (SGD) plays an important role in coastal biogeochemical processes and hydrological cycles, particularly off volcanic islands in oligotrophic oceans. However, the spatial and temporal variations of SGD are still poorly understood owing to difficulty in taking rapid SGD measurements over a large scale. In this study, we used four airborne thermal infrared surveys (twice each during high and low tides) to quantify the spatiotemporal variations of SGD over the entire coast of Jeju Island, Korea. On the basis of an analytical model, we found a linear positive correlation between the thermal anomaly and squares of the groundwater discharge velocity and a negative exponential correlation between the anomaly and water depth (including tide height and bathymetry). We then derived a new equation for quantitatively estimating the SGD flow rates from thermal anomalies acquired at two different tide heights. The proposed method was validated with the measured SGD flow rates using a current meter at Gongcheonpo Beach. We believe that the method can be effectively applied for rapid estimation of SGD over coastal areas, where fresh groundwater discharge is significant, using airborne thermal infrared surveys.     

Controls on metamorphic equilibration: the importance of intergranular solubilities mediated by fluid composition

A dramatic demonstration of the role of intergranular solubility in promoting chemical equilibration during metamorphism is found in the unusual zoning of garnet in pelitic schist exposed at Harpswell Neck, Maine, USA. Many garnet crystals have irregular, patchy distributions of Mn, Cr, Fe and Mg in their inclusion‐rich interiors, transitioning to smooth, concentric zoning in their inclusion‐poor outer rims; in contrast, zoning of Ca and Y is comparatively smooth and concentric throughout. We re‐assess the disputed origin of these zoning features by examining garnet growth in the context of the thermal and structural history of the rocks, and by evaluating the record of fluid–rock interaction revealed in outcrop‐scale veining and fluid‐inclusion assemblages. The transition in the character of garnet zoning correlates with the onset of a synkinematic, simple‐shear‐dominated phase of garnet growth and with a shift in the composition of the intergranular fluid from CO₂‐rich to H₂O‐rich. Compositional variations in garnet are therefore best explained by a two‐stage growth history in which intergranular diffusive fluxes reflect differences in the concentration of dissolved species in these two contrasting fluids. Interiors of garnet crystals grew in the presence of a CO₂‐rich fluid, in which limited solubility for Mn and Cr (and perhaps Fe and Mg) produced patchy disequilibrium overprint zoning, while appreciable solubility for Ca and Y permitted their rock‐wide equilibration. Rims grew in the presence of an H₂O‐rich fluid, in which high intergranular concentrations for all elements except Cr enabled diffusion over length scales sufficient for rock‐wide equilibration. This striking example of partial chemical equilibrium during reaction and porphyroblast growth implies that thermal effects may commonly be subsidiary in importance to solubilities in the intergranular medium as determinants of length scales for metamorphic equilibration.