数据采集中特征点粗差定位方法的探讨

本文分析了特征点应满足的几种条件，给出了一次范围最小（Ｌ１）法，最小二乘法以及粗差探测法进行特征点粗差定位方法，并以模拟实例为例对它们进行了比较，得出了一些有意义的结论。     

A new method of testing pile using dynamic P-S-curve made by amplitude of wave train

A new method of detecting the vertical bearing capacity for single-pile with high strain is discussed in this paper. A heavy hammer or a small type of rocket is used to strike the pile top and the detectors are used to record vibration graphs. An expression of higher degree of strain (deformation force) is introduced. It is testified theoretically that the displacement, velocity and acceleration cannot be obtained by simple integral acceleration and differential velocity when long displacement and high strain exist, namely when the pile phase generates a whole slip relative to the soil body. That is to say that there are non-linear relations between them. It is educed accordingly that the force P and displacement S are calculated from the amplitude of wave train and (dynamic) P-S curve is drew so as to determine the yield points. Further, a method of determining the vertical bearing capacity for single-pile is discussed. A static load test is utilized to check the result of dynamic test and determine the correlative constants of dynamic-static P(Q)-S curve. Foundation item: Key projects of the tenth Five-year Plan of Yunnan Province (documented Yunnan district [2002]54-02-02) and Geophysical Society of Yunnan Province.     

物理实验中的不确定度评定

阐述了不确定度的定义、来源、分类及用不确定度评定测量结果的一些表示方法。分析了误差和不确定度的区别。最终给出了测量不确定度的评定。     

区域地球化学数据的归一化处理及应用

介绍了一种简单的勘查地球化学数据调整方法———归一化,该方法采用各批或各区块差异数据的平均值或中位数的衬值乘以参照值以获得元素的视含量,用于调整不同分析批次之间的系统误差,或不同背景区数据的差异;用2个实例详细介绍了该方法的应用效果。     

鄂尔多斯盆地苏里格庙气田上古生界盒8段地质与地球物理响应特征

苏里格庙气田主要产气层为上古生界石盒子组盒8段，属于三角洲平原分流河道沉积。复合砂体近南北向展布；单砂体的厚度变化大，非均质性明显，储渗变化大。盒8段含气砂岩在AVO资料上有明显反映；在综合测井资料上，盒8段表现出自然伽玛测井值、密度测井值、补偿中子测井值都偏低，电阻率、声波时差测井值较高，出现了大幅度的自然电位异常。利用核磁共振测井技术测得苏里格庙区某井盒8段3555．9m～3559．6m为气层，3560．6m～3572m为气水层，与生产实践吻合得很好。     

GPS广播星历参数拟合算法

介绍了GPS广播星历参数的最小二乘估计方法。推导了相应的计算公式。计算结果表明。文中给出的公式是正确的，其拟合精度以用户距离误差(URE)示时，对预报轨道的损失小于1cm。     

基于典型相关分析的变化检测中变化阈值的确定

以东营市为例 ,把基于典型相关分析的方法运用于多时相遥感影像的变化检测中。对于变化阈值的确定 ,采用了一种基于贝叶斯理论的最小错误率的方法。这种方法实质上是一种非监督分类的方法 ,即不需要地面实况数据或其它先验知识 ,直接对典型相关处理后的差值图像进行分析计算得到阈值 ,使变化检测的错误率达到最小。实验结果证明了这种方法的有效性。     

基于二维直接线性变换的数字相机畸变模型的建立

提出并论证了基于二维直接线性变换的畸变的校正方法。本方法特别适用于各类固态摄像机(CCD、CID、PSD)的畸变模型的建立，以补偿各类像点系统误差。     

Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.