雨滴谱数据在S波段双偏振天气雷达数据质量评估中的应用

结合T-Matrix方法和雨滴谱仪数据反演双偏振参量,设计了一种雨滴谱反演评估方法(雨滴谱法),利用其反演结果可对双偏振天气雷达数据进行评估。将此方法应用于不同类型降水过程的雷达偏振参量数据质量评估,结果表明:满足微雨条件时,雨滴谱法与传统的微雨滴法均能有效监测由雷达系统误差导致的观测偏差,且评估结果十分接近;不满足微雨条件时,雨滴谱法评估的不同类型降水过程的雷达数据质量与满足微雨条件下的评估结果十分接近,客观证明了系统调整后雷达运行良好、数据质量稳定;不同雨强(R)情况下,雨滴谱法的评估结果具有一致性。10 mm·h^-1≤R<20 mm·h^-1时,雷达观测的数据质量最为稳定。该雨滴谱法适用范围广,可动态评估双偏振雷达偏振参量质量,有助于雷达调整和数据校正。     

河南产宝石级高温高压合成钻石的谱学特征及电磁性研究

为快速鉴定高温高压(HPHT)合成钻石,前人已开展了系统的发光特征和谱学特征研究,但对比性分析较少,且对电学性质和磁学性质关注不多.本文结合常规宝石学观察、高精度谱学测试以及导电性和磁性测试,对49粒无色、黄色样品进行了深入研究和对比分析.结果表明:①铁、钴、镍等金属元素的触媒残余是HPHT合成钻石的磁性来源,测试样品...     

油气包裹体的显微红外光谱测试技术及应用

单一油气包裹体的成分一直是地质学家关注的焦点,它能为油气成藏研究提供最直接的证据。显微红外光谱技术可以测定单个油气包裹体的成分、分子结构和其中油气包裹体的成熟度。本文应用显微红外光谱技术、包裹体的鉴定和均一温度测定技术,分析了大庆探区海拉尔盆地乌27井、巴16井、希3井等样品的包裹体。研究表明,乌27井有过两期成藏,并以第二期为主;巴16井也有过两期主要成藏,且第二期具混源的特点;希3井只有一次主要成藏期。同时利用红外光谱的CH2/CH3值、Xinc、Xstd划分了三口井的油气成藏期次,结果与镜下鉴定结论相一致,并确定了其中油气包裹体的成熟度。本文还探讨了显微-红外光谱测试单一油气包裹体的发展方向。     

Estimation of peak relative velocity and peak absolute acceleration of linear SDOF systems

In the seismic analysis and design of structures, the true velocity and absolute acceleration are usually approximated by their corresponding pseudo-values. This approach is simple and works well for structures with small damping (say, less than 15%). When the damping of a structure is enhanced for the purpose of response reduction, it may result in large analysis and design errors. Based on theory of random vibration and the established mechanism of seismic response spectra analysis, a method is developed (1) to predict the relative velocity spectra with any damping ratio level directly from the 5% standard pseudo-acceleration spectrum; and (2) to estimate the peak absolute acceleration. The accuracy of both is validated by using two selected ensembles of ground motion records.     

A new spatial coherence model and analytical coefficients for multi-support response spectrum combination

In this paper, a new spatial coherence model of seismic ground motions is proposed by a fi tting procedure. The analytical expressions of modal combination (correlation) coeffi cients of structural response are developed for multi-support seismic excitations. The coeffi cients from both the numerical integration and analytical solutions are compared to verify the accuracy of the solutions. It is shown that the analytical expressions of numerical modal combination coeffi cients are of high accuracy. The results of random responses of an example bridge show that the analytical modal combination coeff icients developed in this paper are accurate enough to meet the requirements needed in practice. In addition, the computational effi ciency of the analytical solutions of the modal combination coeff icients is demonstrated by the response computation of the example bridge. It is found that the time required for the structural response analysis by using the analytical modal combination coeffi cients is less than 1/20 of that using numerical integral methods.     

基于Hv方法的三轴液压振动系统频响函数估计的研究

三轴液压振动系统是实验室内模拟振动环境的主要设备,其主要功能是精确地复现给定的功率谱和时间历程。振动控制技术是实现这一目标的关键技术,它以频响函数估计为基础。频响函数估计的精度影响控制过程的快速性和稳定性。本文对几种典型的频响函数估计方法进行了分析,针对传统方法精度低且受到矩阵病态条件约束等缺点,应用特征分析与摄动理论构造了一种多入多出的Hv方法,并且应用三轴液压振动系统的实测数据对其进行了检验。结果表明该方法是适用的。     

A generalized conditional intensity measure approach and holistic ground‐motion selection

A generalized conditional intensity measure (GCIM) approach is proposed for use in the holistic selection of ground motions for any form of seismic response analysis. The essence of the method is the construction of the multivariate distribution of any set of ground‐motion intensity measures conditioned on the occurrence of a specific ground‐motion intensity measure (commonly obtained from probabilistic seismic hazard analysis). The approach therefore allows any number of ground‐motion intensity measures identified as important in a particular seismic response problem to be considered. A holistic method of ground‐motion selection is also proposed based on the statistical comparison, for each intensity measure, of the empirical distribution of the ground‐motion suite with the ‘target’ GCIM distribution. A simple procedure to estimate the magnitude of potential bias in the results of seismic response analyses when the ground‐motion suite does not conform to the GCIM distribution is also demonstrated. The combination of these three features of the approach make it entirely holistic in that: any level of complexity in ground‐motion selection for any seismic response analysis can be exercised; users explicitly understand the simplifications made in the selected suite of ground motions; and an approximate estimate of any bias associated with such simplifications is obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

波伏棱（Povlen）型羟基纤蛇纹石的谱学研究

波伏棱型羟基纤蛇纹石是波伏棱型纤蛇纹石矿物的新变种,本文报导它的吸收光谱、红外光谱、穆斯堡尔谱、电子顺磁共振谱和核磁共振谱。 研究表明,吸收光谱是Fe~(3 )和Fe~(2 )的晶场跃迁以及Fe~(2 )→Fe~(3 )的荷移跃迁引起的;红外光谱是OH和Si-O的伸缩振动、OH转动以及Mg-O和Si-O的弯曲振动引起的;穆斯堡尔谱是Fe~(2 )_(八面体)、Fe~(3 )_(八面体)和Fe~(3 )_(四面体)引起的;电子顺磁共振谱是Mn~(2 )_(八面体)、Fe~(3 )_(八面体)和Fe~(3 )_(四面体)引起的;核磁共振谱是管道水,镁八面体和硅氧四面体上的OH引起的;矿物加热到825℃时,结构开始破坏并出现镁橄榄石相。 此外,本文还解释了该蛇纹石颜色的本质,阐明了上述过渡金属离子和OH在该矿物中的结构环境。     

方解石中Mn~(2+)离子四级EPR晶场参量α_0随温度变化的研究

本文研究表明,对方解石中Mn~(2+)离子的四级EPR晶场参量α_0,虽然其轴向场部分的贡献远小于立方场部分,但二者随温度的变化却差别不大,原因是轴向晶场参量F对键角变化十分敏感。因此,在研究热膨胀系数明显各向异性的晶体中的α_0随温度变化时,不能忽略轴向场部分的贡献,即不能假设α_0≈-α。     

The Fourier Integral Method: An efficient spectral method for simulation of random fields

The Fourier Integral Method (FIM) of spectral simulation, adapted to generate realizations of a random function in one, two, or three dimensions, is shown to be an efficient technique of non-conditional geostatistical simulation. The main contribution is the use of the fast Fourier transform for both numerical calculus of the density spectral function and as generator of random finite multidimensional sequences with imposed covariance. Results obtained with the FIM are compared with those obtained by other classic methods: Shinozuka and Jan Method in 1D and Turning Bands Method in 2D and 3D, the points for and against different methodologies are discussed. Moreover, with the FIM the simulation of nested structures, one of which can be a nugget effect and the simulation of both zonal and geometric anisotropy is straightforward. All steps taken to implement the FIM methodology are discussed.