沙漠微生物矿化覆膜及其稳定性的现场试验研究

将微生物诱导矿化技术应用于原位沙漠覆膜的形成,使得流动沙丘经结皮固定而成为半固定、固定沙丘,从根本上阻断沙尘暴的源头。在内蒙古乌兰布和沙漠腹地选择两个微生物矿化试验区域（TP1和TP3）,分别用于两种不同矿化菌种诱导生成碳酸钙覆膜。研究沙漠微生物矿化覆膜的现场试验方法及工艺,对原位矿化覆膜的强度及其在沙漠环境中的长期稳定性进行跟踪检测。采用沙漠土中自行提取的葡萄球菌和传统的巴氏芽孢杆菌两种不同的微生物矿化菌种,通过现场贯入试验检测7、14、28、60、210 d后矿化覆膜沿深度发展的贯入阻力,并将覆膜厚度为2 cm处的平均贯入阻力换算成覆膜层强度,总结覆膜强度随时间的发展变化规律。现场观测结果显示,不同微生物菌种诱导生成的矿化覆膜均在试验的第4天开始形成,到第7天覆膜层具有稳定的强度和厚度,现场检测覆膜的平均厚度为2.0～2.5 cm,经自源葡萄球菌诱导生成的矿化覆膜（TP1）的强度是巴氏芽孢杆菌诱导生成的矿化覆膜（TP3）强度的1.05倍。当经历冬春交替后覆膜层强度都有不同程度的降低,明显地TP3较TP1区域表面剥落更为严重,第210天检测TP3的平均厚度为0.7～1.0 cm,覆膜强度较第7天时降低19%,覆膜内碳酸钙含量较第7天检测时降低15%～30%。而TP1在第210天时的强度较第7天时强度降低仅2%。因此,微生物诱导矿化技术可以应用于沙漠原位覆膜的形成,且沙漠自源葡萄球菌经诱导生成的矿化覆膜层具有更好的强度表现和稳定性。     

Model tests on installation and extraction of suction caissons in dense sand

A series of model tests were performed on steel- and Perspex-made suction caissons in saturated dense marine sand to explore installation and extraction behaviors. The extractions of the caisson were conducted by applying monotonic loading or by pumping water into the caisson. Responses of suction caissons to pullout rates, aspect ratios, and extraction manners were examined. Test results show that a cone-shaped subsidence region occurs around the suction caisson during the suction-assisted installation. The pullout bearing capacity of the suction caisson in sand is dominated by the loading rate and the loading manner. For the suction caisson subjected to monotonic loading, the maximum bearing capacity is reached at the pullout rate of about 20.0?mm/s. The mobilized vertical displacement corresponding to the pullout capacity increases with increasing the pullout rate. The passive suction beneath the suction caisson lid reaches the maximum value when the pullout bearing capacity is mobilized. In addition, during the suction caisson extracted by pumping water into the caisson, the maximum pore water pressure in the caisson is obtained under the displacement of approximately 0.04 times the caisson diameter. The absolute values of the maximum pore water pressures for the suction caissons approximately equal those of the maximum vertical resistances at the monotonic pullout rate of 5 mm/s. When the vertical displacements of the suction caissons with the aspect ratio of 1.0 and 2.0 reach 0.92 and 1.77 times the caisson diameter, respectively, the seepage failure occurs around the caissons. Using a scaling method, the test results can be used to predict the time length required for the prototype suction caisson to be extracted from the seabed.     

CAUSAL ANALYSIS AND NUMERICAL MODELING OF THE INSHORE INTENSIFICATION OF SUPER TYPHOON “HATO”

This paper comprehensively analyzes the characteristics and cause of the inshore intensification of super typhoon "Hato", the 13 th super typhoon in 2017. The aspects of typhoon structure, evolution of large-scale circulation and physical quantity field are analyzed using observation data from the Guangdong Automatic Station, Shenzhen Doppler Radar data, NCEP 1°×1° reanalysis data, NCEP 0.25°×0.25° sea surface temperature(SST) data, etc.Additionally, in order to investigate the influence of SST change on the intensity of "Hato", the WRF model and ECMWF 0.125°×0.125° reanalysis data are combined to conduct 3 sensitivity tests on"Hato". The results show that the favorable conditions for inshore intensification of "Hato"included the strengthening and westward extension of the subtropical high, continuous increase of low level moisture transport, an anomalous warm SST area north of 20°N in the South China Sea, an extreme divergence value in the northern South China Sea exceeding 6 ×10-5 s-1, and vertical environmental wind shear between 1.1 m/s-4.8 m/s. The intensity of"Hato"was very sensitive to changes in SST. When the SST rose or dropped by 2℃, the minimum central pressure of the typhoon changed by about 13 hPa or 11 hPa,respectively. SST indirectly influenced the intensity of the typhoon through affecting latent heat transport and sensible heat transport.     

An experimental investigation of water level effects on the dynamic behaviour of a large arch dam

The need for full‐scale dynamic tests, which are recognized as the most reliable method to evaluate a structure's vibration properties, is increasing as new analysis techniques are developed that take into account the complex interaction phenomenons that occur in dam–reservoir–foundation systems. They are extremely useful to obtain reliable data for the calibration of newly developed numerical methods. The Earthquake Engineering and Structural Dynamics Research Center (CRGP) at the University of Sherbrooke has been developing and applying dynamic testing methods for large structures in the past 10 years. This paper presents the experimental evaluation of the effects of the varying water level on the dynamic response of the 180 m Emosson arch dam in Switzerland. Repeated forced‐vibration tests were carried out on the dam during four different periods of the reservoir's filling cycle during a one‐year span. Acceleration and hydrodynamic pressure frequency responses were obtained at several locations while the dam was subjected to horizontal harmonic loading. The variation of the resonant frequencies as a function of the reservoir level is investigated. A summary of the ongoing numerical correlation phase with a three‐dimensional finite element model for the dam–reservoir–foundation system is also presented. Copyright © 2001 John Wiley & Sons, Ltd.     

隔震桥梁子结构拟动力实验中加载速率的影响因素研究

本研究运用DSP高速数字信号处理器的实时信号处理与控制技术,研究了基于速度控制法、OS数值积分法和相应的实验误差控制法的子结构拟动力实验系统。该试验系统对动力加载装置采用速度控制,在加载过程中考虑了加载速率对实验结果的影响,使隔震橡胶支座的速度相关性能在试验中得到充分体现,同时采用OS数值积分法,充分地减少了试验的时滞误差,提高了试验精度。并通过不同加载速率的子结构拟动力实验研究了天然橡胶支座、高阻尼橡胶隔震支座和超高阻尼橡胶隔震支座对桥梁的隔震效果,在对实验结果进行分析对比后,定量地研究了不同的加载速率对隔震桥梁子结构拟动力实验结果的影响。     

初始主应力方向对钙质砂动力特性影响的试验研究

利用大连理工大学的土工静力-动力液压三轴-扭转动多能剪切仪对相对密度为30 %的钙质砂进行了扭转和竖向循环耦合试验,探讨了初始主应力方向角 对钙质砂动强度和残余应变发展的影响。试验结果表明： 对钙质砂的动强度、残余应变发展的影响非常明显,随着 的增大,钙质砂的动强度显著减小,而残余应变的发展速度则明显加快。     

砂粒粒径与砂层厚度对单体筐养养殖系统中三疣梭子蟹(Portunus trituberculatus)幼蟹摄食行为与生长特性的影响研究

建立了以经过遗传改造的发光细菌Acinetobacter sp. RecA为受试物种的环境污染物遗传毒性快速检测方法,该方法最快可在3h内得到毒性评价结果。采用该方法评价了环渤海排污口12份污水样品的遗传毒性。环渤海12个排污口的污水样品均表现出了不同水平的遗传毒性,并呈现出一定的分布特征。其中,高毒水质集中出现在山东半岛污水样品中,中毒水质集中出现在辽东半岛地区,而低毒水质主要集中于京津冀地区。综上,在环渤海的污水样品遗传毒性检测中,这种新型发光细菌法具有快速、灵敏、简便等优点,为以后近海环境的水质生物毒性检测提供了参考依据,具有应用于近海环境水质快速监测与评价的潜力。     

UH模型在有限元分析中的应用

由姚仰平等提出的超固结土统一硬化模型(UH模型)能够描述超固结土的硬化、软化、剪缩和剪胀等应力应变特性以及应力路径对它的影响。通过改进,直线型的Hvorslev线由抛物线型的Hvorslev线代替,UH模型的参数与剑桥模型(Cam-clay模型)的参数相同。应用该模型,对三轴试验进行有限元模拟,分析了与应用Cam-clay模型所得应力应变关系曲线的异同点;针对刚性承压板试验,进行了地基承载力的三维有限元分析,比较了与应用Cam-clay模型和摩尔库仑模型(Mohr-Coulomb模型)等所得p-s曲线的不同,分析了地基中不同点处的应力-应变关系曲线,并与Boussinesq弹性理论计算的应力做了比较;进行了地基固结沉降数值分析,比较了孔压、沉降的变化规律,体现了UH模型的优越性。     

基于潜标测量的海洋环境噪声谱特性分析

利用海洋环境噪声测量潜标系统对南海典型海域开展了为期3个月的海洋环境噪声测量,16通道海洋环境噪声测量系统每小时测量两分钟噪声信号。数据处理结果表明,800~5 000Hz范围内,噪声谱与风速相关性最好,且风速越大相关性越好,噪声谱与风速的相关性好于与浪高的相关性。风关噪声谱级在海水中部基本不随接收深度发生变化,但由于测量水听器阵长度未能覆盖整个水深,因此未给出海面和海底处谱级变化规律。在400Hz以上的高频段整个风速范围内噪声谱级都随风速发生变化,且噪声谱级与对数风速具有很好的线性关系。     

Integrated approach for identification of potential groundwater zones in Seethanagaram Mandal of Vizianagaram District,Andhra Pradesh,India

Identifying a good site for groundwater exploration in hard rock terrain is a challenging task. In hard rocks, groundwater occurs in secondary porosity developed due to weathering, fracturing, faulting, etc., which is highly variable within short distance and contributing to near-surface inhomogeneity. In such situations topographic, hydrogeological and geomorphological features provide useful clues for the selection of suitable sites. Initially, based on satellite imagery, topographical, geomorphological and hydrogeological features, an area of about 149 km² was demarcated as a promising zone for groundwater exploration in the hard rock tract of Seethanagaram Mandal, Vizianagaram District, Andhra Pradesh, India. A total of 50 Vertical Electrical Soundings (VES) were carried out using Wenner electrode configuration. An interactive interpretation of the VES data sharpened the information inferred from geomorphological and hydrogeological reconnaissance. Ten sites were recommended for drilling. Drilling with Down-The-Hole Hammer (DTH) was carried out at the recommended sites down to 50 to 70 m depths. The interpreted VES results matched well with the drilled bore well lithologs. The yields of bore wells vary from 900 to 9000 liters per hour (lph).