华北克拉通西部块体北缘及邻区地壳厚度与泊松比分布特征

收集了2010—2011年华北克拉通西部块体北缘及邻区布设的36个流动地震台和2009—2016年内蒙古自治区数字地震台网17个宽频带固定地震台站的远震事件波形数据, 采用接收函数H-κ算法分析获得了53个基岩台站下方的地壳厚度和泊松比结果。 此外, 结合已有的81个台站的研究成果, 给出华北克拉通西部块体北缘及邻区地壳厚度与泊松比分布特征。 综合分析认为, 研究区地壳厚度在整体上呈现自东向西渐变的特征, 最厚的地方出现在华北克拉通西端的阿拉善地块(～48.7±3.0 km)。 研究区平均泊松比为0.27, 泊松比高值异常出现在河套断陷带, 意味着可能具有较高的地壳温度或者存在壳内部分熔融。 研究区内不同构造单元呈现出显著的地壳厚度和泊松比分布特征的差异性, 意味着在华北克拉通构造演化过程中, 不同地区经历了不同的地壳改造过程。     

青藏高原东南缘地貌边界性质的界定及其对高原东南缘扩展模式的启示

青藏高原东南部的地貌结构是高原隆升深部动力过程与高原扩展的重要指标之一,存在受下地壳流驱动的渐变模型和受宽约50～200km的雅砻-玉龙断裂系控制的陡变模型2种不同认识。文中基于30m分辨率的SRTM数据进行数字高程分析,利用高程和水系参数对研究区地貌加以提取和分析,结合野外地貌和构造调研的结果以及前人的相关研究,对高原东南缘川滇地块中部构造地貌细结构进行了详细的解析。研究认为,青藏高原东南边界具有明显的台阶式构造地貌结构,不同台阶梯度带受不同时期发育的NE-SW向断裂控制。其中一级边界位于木里-玉龙断裂,控制了平均海拔4 200m的高原面的东南边界,是渐新世—中新世早期构造抬升的结果;二级边界受中新世中期逆冲活动的金河-箐河断裂控制,其构成丽江—盐源一带海拔中等(约3 000m)、相对低起伏区域的东南边界。高原东南边界的台阶式构造地貌结构反映了高原向SE的前展式逆冲扩展。这种扩展模式并不支持下地壳管道流连续变形模型。     

贺兰山—银川地堑及邻区重力异常特征及构造意义

贺兰山—银川地堑及邻区地质结构复杂,对该区域深浅结构特征的研究具有重要意义.本文采用重力归一化总梯度成像和二维小波多尺度分解方法对研究区内重力异常进行了垂向和横向构造分析.重力归一化总梯度成像结果显示高低转换带的倾角、倾向与地质上的贺兰山东麓断裂、银川断裂和黄河断裂分布吻合较好,贺兰山西麓断裂与贺兰山东麓断裂汇交深度约18 km,银川断裂与黄河断裂汇交深度约25 km;二维小波多尺度分解成像结果表明正谊关断裂、贺兰山西麓断裂、芦花台断裂和银川断裂为上地壳断裂,贺兰山东麓断裂、青铜峡—固原断裂以及黄河断裂为下地壳断裂,且这三大断裂可能分别是阿拉善地块东南边界和鄂尔多斯地块西南边界;1739年平罗M 8.0古地震震中与银川断裂在重力剖面深度约15 km汇交,其垂向高低梯度为强变形带,同时古地震震中位于重力正负异常转换部位的低值区,据此可推断此次古地震的发震构造是银川断裂.这些结论可提高对贺兰山—银川地堑及邻区地质结构的认识,为该区地壳动力学过程及强震的孕震机理研究提供一定的科学依据.     

鄂尔多斯西缘北段的地壳结构和块体间变形关系

本文对喜马拉雅计划二期部分台站的远震波形数据进行接收函数提取,利用接收函数共转换点叠加方法获得阿拉善地块、鄂尔多斯地块以及银川—河套盆地下方0~80 km深度的速度间断面结构.结果表明:鄂尔多斯地块成层性好,地壳厚度为38~42 km,康拉德界面为18~22 km,阿拉善地区的Moho面深度为38~45 km.河套盆地地壳厚度约52 km,银川断陷盆地和贺兰山下方的Moho面最深为~55 km.鄂尔多斯西缘构造边界下方Moho面变化明显,且黄河断裂为深大断裂直接切割莫霍界面.根据本文的间断面成像结果我们进一步确定阿拉善地块与鄂尔多斯地块分属不同的大地构造单元.与此同时,我们推测贺兰山以西70~80 km范围内和鄂尔多斯地块西缘北段存在地壳增厚变形的可能.     

整体平差方法在CCD天体测量中的应用

回顾了基于底片重叠观测的整体平差方法的发展历史和应用概况，分析了该方法应用于底片资料处理没有取得预期效果的原因，介绍了小视场CCD重叠观测的整体平差研究进展．分析与实测资料归算表明，整体平差方法可以在CCD资料处理中充分发挥作用，在保证长焦距、小底片比例尺的同时，通过对CCD重叠观测的整体平差(相当于扩大观测视场)，可覆盖更多的参考星，进而达到改善局部参考架、提高归算结果精度的目的。     

Comparative Analysis of Mitochondrial Control Region Sequence from Three Flatfish Species （Pleuronectidae）

The 5‘-end of the mitochondrial control region sequences of three flatfishes (Pleuronectiformes: Pleuronectidae) were amplified and sequenced. These sequences were compared with those of other three Pleuronectids species retrieved from GenBank. A phylogenetic tree was constructed based on the partial control region sequences. The results of phylogenetic analysis are consistent with those of conventional systematics. Compared to previous studies, the structure of the 5‘-end of mitochondrial control region was analyzed. The terminal associated sequence motif and its complementary motif were identified at the 5‘-end of the sequences. A conserved sequence block, named as CM5‘ d, was identified in the 5‘-end of control region sequences in all Pleuronectids. Another central conserved sequence block, named as CSB-F, was detected in the central conserved blocks.     

Sedimentary control on the formation of a multi-superimposed gas system in the development of key layers in the sequence framework

Based on core observations, well logs and test results of siderite-bearing mudstone from the Benxi Formation to the Member 2 of the Shanxi Formations in the Linxing block, northeastern Ordos Basin, a logging identification model for siderite-bearing mudstone (key layer) was established. The porosity characteristics and sealing property were quantitatively evaluated by logging data. Sedimentary control on the formation of multi-superimposed gas-bearing system in the development of key layers in the sequence framework was also discussed. The results showed that the siderite-bearing mudstone has obvious logging response characteristics, e.g., high photoelectric absorption cross-section index (PE), high density (DEN), high amplitude natural gamma ray (GR), low acoustic (AC), low resistivity (M2RX) and low neutron porosity (CNCF). The quantitatively evaluated results of the porosity characteristics and sealing property for the key layer showed that the key layer has the characteristics of low porosity (with an average of 1.20 percent), low permeability (with an average of 2.29 × 10⁻⁸μm²), and high breakthrough pressure (with an average of 12.32 MPa) in the study area. This layer acts as an impermeable gas barrier in a multi-superimposed gas system. The results also indicated that the material composition of the multi-superimposed gas-bearing system can be established by the sequence stratigraphic framework. The sedimentary evolution results in a cyclic rhythm of material composition vertically. The spatial distribution of the corresponding transgressive event layer near the maximum flooding surface (MFS) in the sequence framework restricts the spatial distribution of the key layer with high breakthrough pressure and low porosity, which constitutes the gas-bearing system boundary. The siderite-bearing mudstone formed near the MFS in the second-order sequence and constitutes a stable comparison of the first-order gas-bearing system boundary, which has a wide range of regional distribution and stable thickness. The siderite-bearing mudstone formed near the MFS in the third-order sequence is often incompletely preserved due to the late (underwater) diversion channel erosion and cutting. This layer forms the coal-bearing reservoirs, which we termed as a second-order gas-bearing system in adjacent third-order sequences to form a uniform gas-bearing system.     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

Experimental analysis of breakwater stability with antifer concrete block

Armor is a pavement made of erosion-resistant materials like a stone or concrete that is constructed to protect breakwater, coasts, and other coastal line features against erosion. These armors are a kind of protective layer made of stone or concrete, used in breakwater constructions or coastal lines, arrayed with specific regular or irregular pattern on the breakwater or the coast. The antifer concrete blocks have almost cubic form, often changed into frustum by adding inclined plates to their sides. One of the most important advantages of these armors is their diversified regular and irregular placement patterns. In this study, using the physical modeling and different tests, the stability level of antifer concrete blocks was evaluated considering the decrease of the armor weight. Results of this study show that by a 10% decrease in the block weight, the failure graph slope is increased and the damage is intensified.     

基于二次场电导率分块连续变化的三维可控源电磁有限元数值模拟

从电偶源三维地电断面可控源电磁法的二次电场边值问题及其变分问题出发,采用任意六面体单元对研究区域进行剖分,并且在单元分析中同时对电导率及二次电场进行三线性插值,实现电导率分块连续变化情况下,基于二次场的可控源电磁三维有限元数值模拟.这个新的可控源电磁三维正演方法可以模拟实际勘探中地下任意形状及电性参数连续变化的复杂模型.理论模型的计算结果表明,均匀大地计算的视电阻率误差和相位误差分别为0.002%和0.0005°.分层连续变化模型的有限元计算结果表明,其与对应的分层均匀模型解析结果有明显差异.三维异常体组合模型以及倾斜异常体等复杂模型的有限元计算结果也有效地反映了异常形态.