Re-discussion on the Jiaochang Arcuate Structure, Sichuan Province, and the Seismogenic Structure for Diexi Earthquake in 19331

The Jiaocbang arcuate structure is one of the numerous arcuate structural belts in Sichuan. The present paper gives a further argument about the characteristics of that arcuate structure and the new activity of the Songpinggou fault and affirms that the Songpinggou fault is an active fault in the Holocene epoch. The Diexi M7.5 earthquake took place in 1933 on the west wing of that arcuate structure, near the apex of the arc. Many authors have given quite different opinions about the genetic structure of that earthquake. The authors have made on-the-spot investigations time and again over recent years. Besides this, the authors have also further studied the shape of intensity contour lines, the distribution characteristics of ground surface seismic hazards, the left-lateral dislocation of buildings along the Songpinggou fault, the NWtrending ground fissures that developed on the ground surface after earthquake, and so on. On this basis, it is still considered that the seismogenic fault of the 1933 Diexi M7.5 earthquake was the Songpinggou fault on the west wing of the Jiaochang arcuate structure.     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

Recurrence characteristics of late-quaternary strong earthquakes on the major active faults along the northern border of Ordos block

Through study on trenches, analysis of recurrence characteristics and recurrence interval cluster/gap of strong earthquakes along the major active faults on the northern border of Ordos block, we found 62 paleoearthquakes that occurred in the late Quaternary, including 33 earthquakes occurring in the Holocene. The recurrence characteristics of the paleoearthquakes are different at three levels, segments, faults, and fault zones. The strong seismic sequence on the independent segments is mostly characterized by long- and short-interval recurrences, while that on the faults and in fault zone is characterized clearly by random and cluster recurrences. Results of the moving window test indicate that the probabilities of "temporal cluster or gap", caused by random coincidence as opposed to intersegment contagion, are 64% and 70% for the Serteng piedmont fault and for the south-border fault of Wula Mountains, respectively, no clear interaction among the segments of each fault; while the probability is 26.8% for the whole fault zone, suggesting a clear interaction among the faults of this fault zone. These recurrence characteristics may imply an effect of the entire block motion on the recurrence of strong earthquakes. Moreover, the elapsed time for the Wujumeng Pass-Dongfeng Village segment of Serteng piedmont fault and the Tuzuo Banner-Wusutu and the Hohhot segments of Daqingshan piedmont fault has exceeded the average recurrence interval, hence these three segments may be the possible places for future strong earthquakes.     

Late Cenozoic deformation subsequence in northeastern margin of Tibet --Detrital AFT records from Linxia Basin

Two events of Tibet uplifting are revealed by detrital apatite fission track (AFT) age data from Linxia Basin. They occurred at about 14 and 5.4-8.0 MaBP respectively. We interpret the first one to be related to the uplifting of the northern Tibet, which might have resulted from convectively removing the thickened lower lithosphere. The second one is a result of Laji Mountain uplifting. Numerous studies of the Tibetan Plateau suggest that the onset time of the deformation in the northeastern margin of Tibetan Plateau and the time of Tibet attaining to its present elevation is about 8 MaBP. They are approximately coincident with the uplift of Lajishan Mountain. It suggests that the northeastern margin of Tibet propagated northeastwardly to its present site in about 8 MaBP for accommodating the sustained convergence between India-Eurasia plate and for keeping its high elevation. The active block pattern dominating the strong earthquake distribution of Chinese continent probably formed at about 8.0-5.4 MaBP.     

喜马拉雅造山带中段定结地区拆离断层

定结地区位于喜马拉雅造山带中段,发育大量的低角度伸展拆离断层,这些拆离断层中部分构成了藏南拆离系的主体。它们基本上垂直于造山带走向伸展,各拆离断层特征显著,普遍发育糜棱岩,糜棱岩类型复杂,主要有硅质糜棱岩、长英质糜棱岩、花岗质糜棱岩。在研究区的北部,拆离断层呈环状产出,构成变质核杂岩三层结构中的中间层,规模一般较大;同时拆离断层使变质核杂岩体盖层中的部分地层拆离减薄;在研究区南部拆离断层呈线状延伸很远,总体上平行造山带延伸,构成了藏南拆离系重要组成部分。部分拆离断层同韧性剪切带平行产出,形成拆离剪切的脆韧性体系。     

吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

2-D deformation analysis of a half-space due to a long dip-slip fault at finite depth

Closed form analytical expressions of stresses and displacements at any field point due to a very long dip-slip fault of finite width buried in a homogeneous, isotropic elastic half-space, are presented. Airy stress function is used to derive the expressions of stresses and displacements which depend on the dip angle and depth of the upper edge of the fault. The effect of dip angle and depth of the upper edge of the fault on stresses and displacements is studied numerically and the results obtained are presented graphically. Contour maps for stresses and displacements are also presented. The results of Rani and Singh (1992b) and Freund and Barnett (1976) have been reproduced.     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

Cretaceous deformation history of the middle Tan-Lu fault zone in Shandong Province, eastern China

Based on field analysis of fault-slip data from different rock units of the Cretaceous basins along the middle part of the Tan-Lu fault zone (Shandong Province, eastern China), we document polyphase tectonic stress fields and address the changes in sense of motion of the Tan-Lu fault zone during the Cretaceous. The Cretaceous deformation history of the Tan-Lu fault zone can be divided into four main stages. The first stage, during the earliest Cretaceous, was dominated by N-S extension responsible for the formation of the Jiaolai basin. We interpret this extension to be related to dextral strike-slip pull-apart opening guided by the Tan-Lu fault zone. The second stage, during the middle Early Cretaceous, was overwhelmingly rift-dominated and characterized by widespread silicic to intermediate volcanism, normal faulting and basin subsidence. It was at this stage that the Tan-Lu-parallel Yi-Shu Rift was initiated by E-W to WNW-ESE extension. The tectonic regime then changed during the late Early Cretaceous to NW-SE-oriented transpression, causing inversion of the Early Cretaceous rift basin and sinistral slip along the Tan-Lu fault zone. During the Late Cretaceous, dextral activation of the Tan-Lu fault zone resulted in pull-apart opening of the Zhucheng basin, which was subsequently deformed by NE-SW compression. This deformation chronology of the Tan-Lu fault zone and the associated Cretaceous basins allow us to constrain the regional kinematic models as related to subduction along the eastern margin of Asia, or related to collision in the Tibet region.