JONSWAP谱和N谱的几个对应特征量间的关系

研究了风浪频谱ＪＯＮＳＷＡＰ谱的峰度因子γ、尖度因子Ｐｊ和Ｎ谱尖度因子ＰＮ，参变量ｐ，ｑ间的关系；并在此关系上给出了由这两种谱计算的几个对应参量间的关系，在使用不同的谱形进行特征量的计算时，应注意不同频谱间的成长因子致性，以免引起计算结果的错误。     

The wave transformation and breaking phenomena in shallow water

Ｔｈｅｗａｖｅｔｒａｎｓｆｏｒｍａｔｉｏｎａｎｄｂｒｅａｋｉｎｇｐｈｅｎｏｍｅｎａｉｎｓｈａｌｌｏｗｗａｔｅｒ￥ＬｉＹｕｃｈｅｎｇ（１．ＤａｌｉａｎＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｄａｌｉａｎ１１６０２３，Ｃｈｉｎａ）Ａｂｓｔｒａｃｔ：...     

Stability Design System of Submarine Pipelines

This paper introduces a stability design system of submarine pipelines. The system can provide a reasonable design procedure for users with reference to domestic and foreign methods and in the light of home engineering experience.     

确定连续系统参数的时域方法

提出一种确定连续系统参数的时域方法。该方法利用方波输入和系统稳定性，离析出输出采样信号与结构参数的内在联系，推导出确定连续系统结构参数的算法．指出该算法与辨识方法相结合，可实现对含随机干扰的连续系统结构参数的估计．     

渤海南部海域年极值波浪和设计波浪的特征研究

本文用统计计算和后报方法，获得了本海域不同海区多年年极值波高（Ｈ１／１０）资料。用Ｐ－Ⅲ型和短期测波资料频率分析方法，估算了各海区的设计波高，并依据文献［３］计算出对应的平均周期。用Ｋｏｌｍｏｇｏｒｏｆｆ适合度方法检验所得的结果表明，依Ｐ－Ⅲ型方法拟配的理论频率曲线与经验点十分吻合，从而确定了本海域不同海区最佳的设计波浪。分析本海域年极值波浪的基本特征表明，本海域除了渤海湾北部海区以外，主浪向一般为ＮＮＥ向，渤海海峡区的年极值波高和设计波高均为最大，而向莱州湾及渤海湾沿岸海区逐渐减小；在沿岸海区，由龙口至黄河口一带的极值波高较大。     

规则波和不规则波作用下消波建筑物前的波高分析

消波建筑物在国内外已得到广泛应用。本文采用近似方法分析了明基床上直立式消波建筑物前的波高及消波室内的波高，从而确定建筑物的消波效果。并在规则波的基础上将成果推广至不规则波作用下的情况。     

Effect of wave-directionality on second-order loads induced by the set-down

At first-order of approximation a sea-state may be considered as an infinite sum of Airy components with angular frequencies ω_i and wave-number vectors k_i. A second-order analysis shows the co-existence of long waves appearing at the difference frequencies ω_i—ω_j with wave-number vectors k_i—k_j. In shallow water they become appreciable in amplitudes and may induce slow-drift motion of moored structures.For small values of ω_i—ω_j,k_i—k_j may take all kinds of directions for an angular-spread wave system. Then it may be questioned how the in-line and transverse second-order accelerations compare to those obtained for a mono-directional wave-system.This analysis is carried out here by relating the spectra of the second-order horizontal accelerations to the directional wave-spectrum. Numerical applications are first performed for deep water. They show that at low frequencies, even for very narrowly spread wave systems, the transverse component is larger than the in-line component. In shallow water both components are dratically reduced as compared to the mono-directional case. As a consequence one may question the validity of model-testings or numerical models which take no account of the directionality of the wave-system.     

钛型吸附剂的表面特性

用自装的BET容量法装置测定了几种粒状钛型吸附剂的比表面及其孔径分布。测定是在常温减压下进行的。结果表明:钛型吸附剂在加铀海水中的吸铀量与样品的比表面及孔径分布有一定的内在联系。这种表面性质的研究对吸附剂的筛选有重要的指导意义。     

Fluid flow equations governing primary oil migration as a separate phase

A mathematical model of primary oil migration as a separate phase out of compacting shales is presented. During burial and oil generation, source rock porosity decreases and oil saturation increases until residual oil saturation is reached. At this stage oil is expelled out by capillary and excess fluid pressure gradients. The model is a system of differential equations which relate changes in oil and water saturation in time to water and oil flow out of the source rock during burial. An additional set of equations for periods of erosion of overburden are also provided. The equations can be numerically solved by finite difference method. If oil and water flow is to be simulated during oil generation, then at each time step, changes by oil generation in oil and water saturations and porosity must be calculated. The solution procedure is briefly outlined.     

Scattering of Semidiurnal Internal Kelvin Wave at Step Bottom Topography

A three-dimensional, multi-level model was used to study the energy dissipation of semidiurnal internal Kelvin waves due to their interaction with bottom topography. A simplified topography consisting of a channel with an additional shallow bay was used to clarify the wave’s scattering process. When the first mode semidiurnal internal wave given at an open boundary arrives at the bay mouth, higher-mode internal waves are generated at a step bottom of the bay mouth. As a result, the energy of the first mode internal Kelvin wave is effectively decayed. The decay rate of the internal Kelvin wave depends on both the width and length of the additional bay. The maximum decay rate was found when a resonance condition occurs the bay, that is, the bay length is equal to a quarter of wave length of the first mode internal wave on the shallow region. The decay rate in the wide bay cases is higher than that in a narrow case, due to a contribution from the scattering due to the Poincare wave that emanates from the corners of the bay head. The decay rate with the additional bay is 1.1–1.8 times that of the case without the additional bay. The decay rate due to the scattering process is found to be of the same order as that of the internal and bottom friction.