Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

Study of A Geo-Acoustic Model of Gas-Bearing Sediment and Its Application in Sediment with Low Acoustic Velocity

A new geo-acoustic model for gas-bearing sediment is proposed based on the work of Dvorkin and Prasad, and Biot theory. Only five geophysical parameters: sediment mineral composition, free gas saturation, tortuosity (also known as the structure factor), permeability, and porosity, are considered in the model. A benefit of this model is that we need only five parameters instead of ten parameters in the Biot’s formulas for acoustic velocity and attenuation calculation. Here the model is demonstrated with the in-situ experimental data collected from the Hangzhou Bay, China. The results of this study suggest that free gas content in sediment is the most critical condition resulting in a low acoustic velocity (compressional wave). The respective contributions of the other four parameters in the model are also discussed.     

基于数字频率合成技术的任意波形发生器设计与应用

介绍了直接数字合成技术的原理及其在任意波形发生器上的应用,设计了任意波形发生器和多类信号的 混合发生软件.并对任意波形发生器的性能进行了测试.测试结果表明,该仪器频率信号发生准确、可靠.将该仪器用于漆包线信号传输特性分析.得到了漆包线的频率特性.     

基于同轴差距测量法的南海深水海底沉积物声衰减特性研究

通过分析沉积物声波测量过程能量损失的实质,阐述平行轴差距衰减测量法和垂直轴差距衰减测量法的研究基础——差动式衰减测量方法原理,并推导了其衰减系数公式。根据南海沉积物的柱状样品分装的特点,结合以上两种方法,提出了同轴差距衰减测量法,这种方法具有原理上的合理性并且其可操作性强;运用此方法测量了沉积物在常温和温度控制变化条件下的声波信号,计算了衰减系数,研究了温度对沉积物声波传播能量的影响,得出南海深水海底沉积物具有以下声衰减特性：沉积物含砂量高,声衰减系数大;随着温度的升高,沉积物的声衰减系数变化具有不均匀性,整体呈非线性减小趋势。以上研究将为声学遥测和反演海底沉积物的物理力学特性提供数据和方法支持。     

基于Gabor变换和支持向量机的手写体字符识别算法

针对在手写字符识别中由于书写习惯和风格的不同造成字符模式不稳定的问题,将支持向量机SVM方法用于手写字符的识别.算法首先采用Gabor变换提取手写字符图像的特征参数,然后采用提取的特征训练SVM分类器.再应用SVM分类器分类和判别手写字符.实验表明这种方法具有良好的车牌识别效果,较强的鲁棒性,较大的应用价值.     

汶川8.0级地震前后陕西地区地倾斜特征迁移分析

对汶川8.0级地震前后陕西地区地倾斜观测资料的分析发现,汶川地震前陕西地区地倾斜存在沿龙门山断裂带方向由东北向西南震中迁移,震后地倾斜反向迁移,迁移平均速度为3～4 km/天。进一步分析认为,震前陕西地区地倾斜向震源迁移可能对汶川8.0级地震起到了触发作用,而震后地倾斜向远场迁移有可能是诱发陕甘川交界的中强余震的主因。     

中华乌塘鳢个体生殖力的研究

研究了湛江沿海中华乌塘鳢个体生殖力及其与生物学指标的关系。结果表明 :个体绝对生殖力为 840 0～ 3 3 2 70粒 ,个体相对生殖力FL 为 5 67 6～ 1 83 3 2粒 /cm ,Fw为 1 5 5 6～ 482 7粒 /g ;个体绝对生殖力与体长、体重、空壳重、卵巢重呈直线相关 ,与年龄呈二次函数相关 ,与成熟系数和肥满度相关关系不显著 ;个体相对生殖力FL 与各生物学指标正相关 ,Fw除了与卵巢重、肥满度和年龄相关关系不显著外 ,其余均显著相关     

Study on the dominant species of Pteropoda in East China Sea

1 INTRODUCTION Pteropoda is a group of marine pelagic mol- lusks, which belongs to Opisthobranchia of Gastro- poda. Although Pteropoda is not a major group in pelagic zooplankton in terms of abundance and number of species, their ecological characters are…     

基于多种形变观测资料分析福建地区形变特征

利用福建区域GPS连续观测资料计算出应变场,由跨断层垂直形变资料计算出形变速率强度累积率,并根据跨断层、体应变等多种形变资料得到各测点压张特性的空间分布.在此基础上,研究了福建区域2005-2006年、2007-2008年、2009-2010年各时期的形变特征.研究结果表明:龙岩-厦门-东山、政海带与沙县南日岛断裂带交...