Tectono-sedimentary evolution of the Upper Prealpine nappe (Switzerland and France): nappe formation by Late Cretaceous-Paleogene accretion

Abstract

The Upper Prealpine nappe of the Swiss and French Prealps consists of a composite stack of various tectonic slivers (Gets, Simme, Dranse and Sarine sub-nappes, from top to bottom). The structural superposition and stratigraphic content of the individual sub-nappes suggests a successive stacking at the South Penninic/Adriatic transition zone during the Late Cretaceous and Early Paleogene. The present paper deals with two aspects. (1) new data obtained from the Complexe de base Series of the Dranse sub-nappe which underlies the Helminthoid Sandstone Formation, and (2) the development of a geodynamic accretionary model for the Upper Prealpine nappe stacking.

The Complexe de base Series reveals a succession of black shales at the base, grading upward into variegated red/green and red shales which were deposited in an abyssal plain environment starved of clastic input. It is overlain by the Helminthoid Sandstone Formation. The combined analysis of planktic and agglutinated benthic foraminifera and comparisons with other Tethyan series suggest an Albian to Campanian age of the Complexe de base succession. Tectonic transport of the abyssal plain segment into a trench environment allowed for the stratigraphic superposition by the Helminthoid sandstone sequence. The present findings combine well with the general scheme of the Upper Prealpine nappe stack and several single results on parts of the nappe stack. We take that opportunity to present a comprehensive model for the tectono-sedimentary evolution of the Upper Prealpine nappe.

We suggest that Late Jurassic-Early Cretaceous asymmetric (?) extension at the South Penninic-Adriatic margin created an extensional alloehthon. Later during the mid-Cretaceous, the start of convergence drove the obduction of oceanic crust on the northern margin of the extensional allochthon. The resulting ophiolitic/continental source supplied clasts to the trench basin in front (Manche turbidite series), and the backarc basin (Mocausa Formation) and abyssal plain (Perrières turbidite series) to the South. During Middle to Late Coniacian the main Adriatic margin was thrusted over the obductionrelated mixed belt and established an incipient accretionary prism containing the former trench, backarc and abyssal plain basin fill series. During this stage the Gueyraz (melange) Complex formed, which separates the trench series from the retroarc and abyssal plain formations. On top of the incipient accretionary prism a forearc basin developed hosting the Hundsrück Formation. The frontal abyssal plain formation (Complexe de base) still received few turbiditic intercalations. From Campanian time on, the forearc basin was bypassed and deposition of the Helminthoid Sandstone Formation occurred on the Complexe de base succession. During the Maastrichtian the abyssal plain and trench fill succession (Dranse nappe) was accreted to the incipient wedge, and in front of a newly active buttress, the Gurnigel trench basin was established. Another accretionary event during latest Paleocene/earliest Eocene added parts of that trench series to the base of the wedge (Sarine nappe). During the Late Eocene the accretionary wedge and remaining trench fill series (Gurnigel nappe) were thrusted en-bloc over the Middle Penninic limestone nappes and partly overtook the latter. Continued shortening of the resulting nappe pile and out-of-sequence thrusting accomplished the overriding of the Middle Penninic units over the former South Penninic Gurnigel trench series (inversion of palaeogeographic domains).     

角锥棱镜直角误差斜入射法检测的理论分析

以矢量形式的折射、反射定律为基础,详细推导了角锥棱镜直角误差δ与分划板自准直双像间距t之间的关系,提出了基于斜入射法、利用自准直平行光管直接测量角锥棱镜直角误差的光电检测系统,并进行了测量精度的理论分析。     

多源异质遥感影像的分形特征分析

分形理论已经在影像压缩、分割、去噪等方面表现出了较大的优势,其特点是能够准确地描述影像的空间结构信息和变化规律.分别采用分线法和三角棱柱法对同一实验地区的多种分辨率不同波段的遥感卫星影像进行分析,分别计算了图像中不同地形区域(如城区、湖泊、田地等)的分形维数,并根据两种算法的特性对图像进行了特征分析.多源遥感影像的实验结果证明,分形维数确实可以作为影像特征分析的一个重要工具,并可以指导分析遥感影像的应用情况.此外,在计算分形维数的过程中,采用三折线拟合法自适应地确定影像的无标度区间,提高了分形维数计算结果的可靠性.     

Early deformation fabrics of melange in the Mesozoic Waipapa Terrane, North Island, New Zealand

Abstract The Waipapa Terrane in northern North Island, New Zealand, is a Mesozoic accretion-ary complex formed along the Gondwana margin. It contains abundant melange rocks with distinctive characteristics. Precise analyses of their mesoscopic fabrics in Waiheke Island near Auckland have revealed the following sequence of deformation. The earliest phase of deformation of the sandstone/mudstone association, which is the main constituent of this terrane, originated by chaotic mixing of sand and mud due to liquidization of water-saturated, poorly consolidated sediments. The second phase was characterized by hydrofracturing and subsequent forceful injection of ductile mud into rather brittle sand. Local intrusions of sand forming dykes and sills followed these events, as well as intrusions of pelagic/hemipelagic green argillite originally underlying the sandstone/mudstone association. An abundant occurrence of these mixing and multi-stage injection/intrusion fabrics strongly suggest that the Waipapa Terrane around the study area was a site of high pore-fluid pressure. Scaly-foliated melange fabrics with monoclinic symmetry, originating from layer-parallel shearing, were then locally superimposed on the pre-existing melange fabrics. Similar scaly-foliated fabrics also developed in the chert beds originally intercalated between the green argillite and the uppermost part of the oceanic crust. These scaly fabrics might have been related to the regional stacking and juxtaposition of the accreted sediments. The sequence and variation in style of deformation forming the melange fabrics presumably reflected changes in porosity and state of compaction of accreted sediments in a shallow tectonic level.     

Thermal evolution of the Tertiary Shimanto Belt, Muroto Peninsula, Shikoku, Japan

Abstract The Shimanto accretionary complex on the Muroto Peninsula of Shikoku comprises two major units of Tertiary strata: the Murotohanto Sub-belt (Eocene-Oligocene) and the Nabae Sub-belt (Oligocene-Miocene). Both sub-belts have been affected by thermal overprints following the peak of accretion-related deformation. Palaeotemperatures for the entire Tertiary section range from ～ 140 to 315°C, based upon mean vitrinite reflectance values of 0.9–5.0%R_m. Values of illite crystallinity index are consistent with conditions of advanced diagenesis and anchimetamorphism. Illite/mica b₀ lattice dimensions indicate that burial pressures were probably no greater than 2.5kbar. In general, levels of thermal maturity are higher for the Murotohanto Sub-belt than for the Nabae Sub-belt. The Eocene-Oligocene strata also display a spatial decrease in thermal maturity from south to north and this pattern probably was caused by regional-scale differential uplift following peak heating. Conversely, the palaeothermal structure within the Nabae Sub-belt is fairly uniform, except for the local effects of mafic intrusions at the tip of Cape Muroto. There is a paleotemperature difference of ～ 90°C across the boundary between the Murotohanto and Nabae Sub-belts (Shiina-Narashi fault), and this contrast is consistent with approximately 1200 m of post-metamorphic vertical offset. Subduction prior to Middle Miocene probably involved the Kula or fused Kula-Pacific plate and the background geothermal gradient during the Eocene-Oligocene phase of accretion was ～ 30–35°C/km. Rapid heating of the Shimanto Belt evidently occurred immediately after a Middle Miocene reorganization of the subduction boundary. Hot oceanic lithosphere from the Shikoku Basin first entered the subduction zone at ～ 15 Ma; this event also coincided with the opening of the Sea of Japan and the rapid clockwise rotation of southwest Japan. The background geothermal gradient at that time was ～ 70°C/km. Whether or not all portions of the inherited (Eocene-Oligocene) palaeothermal structure were overprinted during the Middle Miocene remains controversial.     

Phreatomagmatic volcanic hazards where rift-systems meet the sea, a study from Ambae Island, Vanuatu

Ambae Island is a mafic stratovolcano located in the northern Vanuatu volcanic arc and has a NE–SW rift-controlled elongated shape. Several hundred scoria cones and fissure-fed lava fields occur along its long axis. After many decades of quiescence, Ambae Island erupted on the 28th of November 2005, disrupting the lives of its 10,000 inhabitants. Its activity remained focused at the central (crater-lake filled) vent and this is where hazard-assessments were focused. These assessments initially neglected that maars, tephra cones and rings occur at each tip of the island where the eruptive activity occurred < 500 and < 300 yr B.P. The products of this explosive phreatomagmatic activity are located where the rift axis meets the sea. At the NE edge of the island five tephra rings occur, each comparable in size to those on the summit of Ambae. Along the NE coastline, a near-continuous cliff section exposes an up to 25 m thick succession of near-vent phreatomagmatic tephra units derived from closely spaced vents. This can be subdivided into two major lithofacies associations. The first association represents when the locus of explosions was below sea level and comprises matrix-supported, massive to weakly stratified beds of coarse ash and lapilli. These are dominant in the lowermost part of the sequence and commonly contain coral fragments, indicating that the loci of explosion were located within a reef or coral sediment near the syn-eruptive shoreline. The second type indicate more stable vent conditions and rapidly repeating explosions of high intensity, producing fine-grained tephra with undulatory bedding and cross-lamination as well as megaripple bedforms. These surge and fall beds are more common in the uppermost part of the succession and form a few-m-thick pile. An older tephra succession of similar character occurs below, and buried trees in growth position, as well as those flattened within base surge beds. This implies that the centre of this eruption was very near the coastline. The processes implied by these deposits are amongst the most violent forms of volcanism on this island. In addition, the lowland and coastal areas affected by these events are the most heavily populated. This circumstance is mirrored on many similar volcanic islands, including the nearby SW Pacific examples of Taveuni (Fiji), Upolu and Savai'i (Samoa), and Ambrym (Vanuatu). These locations are paradoxically often considered safe areas during summit/central-vent eruptions, simply because they are farthest from the central sources of ash-fall and lahar hazard. The observations presented here necessitate a revision of this view.     

Heat influx and exhumation of the Shimanto accretionary complex: Miocene fission track ages from the Kii Peninsula, southwest Japan

Abstract   To determine how local geological events contributed to the evolution of accretionary complexes and eventual exposure of rocks with different structural levels, geochronological mapping was carried out using fission track (FT) analysis at the Kii Peninsula, southwest Japan. At this site, the original zonal structure of Cretaceous accretionary complexes parallel to the subduction zone is disturbed by the northward projection of the Shimanto accretionary complex. Twenty-six zircon FT ages were obtained from an area of ∼12 km in an east–west direction and ∼15 km in a north–south direction, and classified into three groups: (i) ages ∼15 Ma (range ∼10–20 Ma), which are distributed along the northwest–southeast valley; (ii) ages of ∼50 Ma in the northwest of the study area; and (iii) ages older than those in Groups 1 and 2. Based on results from eight zircon FT length distributions, the Miocene ages appear to be the result of spatial variations in heat influx and cooling after the regional exhumation of the area, as recorded by FT ages of ∼50 Ma.     

THE EVOLUTIONARY HISTORY OF THE WEST KUNLUN MOUNTAINS: A TECTONIC RECONSTRUCTION BASED ON STUDIES OF MAGMATISM

THE EVOLUTIONARY HISTORY OF THE WEST KUNLUN MOUNTAINS: A TECTONIC RECONSTRUCTION BASED ON STUDIES OF MAGMATISM     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

Structural analysis of a newly emerged accretionary prism along the Jinlun-Taimali coast,southeastern Taiwan: From subduction to arc-continent collision

In southern Taiwan the initial collision of the Luzon volcanic arc with the passive continental margin of China results in the emergence of an accretionary prism of, predominantly, turbidites in composition, thus providing an appropriate place to study the temporal and spatial variation of deformation during the transition of subduction to arc-continent collision. Field surveys have recently been carried out in slightly metamorphosed rocks along the well-exposed Jinlun-Taimali coast in southeastern Taiwan. Three folding phases are identified in the area. The first phase is characterized by gently dipping but widely distributed phyllitic cleavage (S₁). The second phase is represented by sparsely distributed crenulation cleavage (S₂) that folded the phyllitic cleavage. The third phase is characterized by E–W trending antiforms (F₃) that involved both types of pre-existing cleavages. Restoration of such an antiform in the north using a method proposed in this paper reveals that phyllitic cleavage in the overturned beds dips gently towards the southeast or east-southeast before the antiform, in relation to the first-phase thrusting or folding under regional ESE-WNW compression. From the first to third phase, the maximum horizontal compression underwent an about 90° anticlockwise rotation from ESE-WNW to E–W or NE–SW to N–S, and the deformation depth seems to decrease drastically, in terms of the decreasing proportion of pervasive deformation. All these variations are attributed to the oblique arc-continent collision that exhumed the whole accretionary prism and induced a local stress perturbation in southeastern Taiwan.