基于分块分形编码的多姿态、表情人脸图像检索

利用图像分形编码中定义域块和最小均方误差一一对应的特点，提出了1种基于分形编码的多姿态、表情的人脸图像检索方法。该方法将待检索图像分割为相同大小的值域块，然后将每一值域块按给定的定义域块进行分形编码，得到最小均方误差，计算该最小均方误差与图像库中最小均方误差的欧氏距离。将待检索图像所有值域块的欧氏距离求平均，此平均欧氏距离较小的几幅图像即为检索出的图像。实验证明该方法能够准确地检索出图像库中存储的同一人的不同姿态、表情的图像。     

Fe(OH)_3胶体与铜离子作用的研究

使用切向流超滤系统得到粒度较均匀的Fe(OH)3胶体,进而对Fe(OH)3胶体粒子与Cu2 的作用进行了研究,并将实验结果与南沙群岛海区表层水中铜与胶体物质结合状况的调查数据进行了比较分析,得到如下结果:(1)在海水介质中,铜在Fe(OH)3胶体上结合的百分率(pH>5)随pH的升高而下降,随着Fe(OH)3胶体浓度的减小而下降?(2)在天然海水介质中,使铜在Fe(OH)3胶体上结合的百分率在50%-70%的有机物浓度为1.0mg·L-1,有机物浓度的增大使铜与无机胶体结合的百分率有下降的趋势?     

悬浮沙激光散斑图像处理的研究

本文以统计模式识别为基础，阐述了图像处理在悬浮沙粒粒径流量中的实际应用，提出了用图像层析来确定放大系数的方法，提出了测量的准确度。     

无机碳与雨生红球藻(Haematococcus pluvialis)细胞调节物质

以单细胞雨生红球藻为材料，采用酸碱滴定和CO2加富通气培养微藻的方法，对旧液中HCO3^-和CO3^2-浓度变化以及对红球藻细胞生长的影响进行了研究。结果表明，旧液具有限制红球藻细胞生长和诱导细胞转化的作用。同时，旧液中无机碳离子浓度明显高于新液。培养液中富含CO3^2-时，各细胞数量与CO3^2-浓度呈正相关，相关系数为0．88。溶液中仅有HCO3^-时，各细胞数与HCO3^-浓度也呈正相关性。因此，排除了CO3^2-和HCO3^-作为旧液中的调节物质，限制红球藻细胞生长和诱导细胞转化的可能性。旧液乙酸乙酯提取物生物检测实验表明，在粗提取物中有降低细胞增长和诱导细胞转化的活性，表明调节物质能溶于有机相，也反过来证实无机碳离子不是旧液中的调节物质。DNA含量和倍性分析结果表明，红球藻游动细胞DNA复制可以加倍后不经过原生质分裂就可以再次进行，因此推测旧液中的调节物质对原生质分裂过程产生抑制作用，而不对DNA复制过程产生抑制作用。     

断阶型潜山带地质模型的建立及储层预测--以CG20潜山为例

以 CG2 0潜山为例 ,从建立地质模型入手 ,包括地层模型、构造模型、储集模型、储盖组合模型、速度模型等 ,认识到各套地层分布和储层物性的差异均与地震响应密切相关 ,因此可以利用地震波的信息 ,预测潜山储层的发育及分布情况。在对 CG2 0潜山进行精细全三维构造解释的基础上 ,探讨性地应用了测井约束反演、吸收系数、相干分析及三维模式识别等技术 ,对潜山储层进行了预测 ,从而提高了潜山勘探的效益 ,并为类似断阶型潜山带的勘探提供了成功的经验 ,具有一定的指导意义。     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.     

A Method of Coding and Decoding in Underwater Image Transmission

A new method of coding and decoding in the system of underwater image transmission is introduced, including the rapid digital frequency synthesizer in multiple frequency shift keying,image data generator, image grayscale decoder with intelligent fuzzy algorithm, image restoration and display on microcomputer.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.