北京市春夏季大气气溶胶的单颗粒分析表征

采集了北京市2000年春夏季大气气溶胶样品5个，采用扫描电镜X射线能谱技术分析大气气溶胶单颗粒约2500个。研究结果表明，沙尘期间，矿物尘是最主要的颗粒物种类，非沙尘期间，北京市大气气溶胶中主要检出矿物尘和含硫颗粒物。夏季随着颗粒物污染的加重，含硫颗粒物的数目百分数增加。是北京市大气颗粒物污染的重要特征。重点讨论了Ca-S颗粒、K-S颗粒和Ca-K-S颗粒三类典型含硫颗粒物的化学组成和粒径分布特征。数目可观的Ca-K-S颗粒以及其他硫酸盐颗粒的生成与相对湿度和云量等气象条件相关，这些颗粒物可能是云中过程的产物。减少SO2排放，减少含硫颗粒物，对于控制北京市的大气颗粒物浓度水平具有重要意义。     

四川新康风化淋滤型海泡石的热相变研究

以四川新康风化淋滤型海泡石为研究对象，利用X射线衍射分析和红外光谱分析技术，对海泡石的热相变过程及特征进行了研究。结果发现，四川新康风化淋滤型海泡石的相变过程与沉积型、热液型海泡石相变过程明显不同，其相变过程可以划分为两个阶段：800℃以下保持海泡石相；800℃以上海泡石相转化为斜顽辉石相。     

Subsurface Occurrence of Natural Gas Hydrate in the Nankai Trough Area: Implication for Gas Hydrate Concentration

Abstract. The Nankai Trough runs along the Japanese Islands, where extensive BSRs have been recognized in its forearc basins. High resolution seismic surveys and site-survey wells undertaken by the MITI have revealed the gas hydrate distribution at a depth of about 290 mbsf. The MITI Nankai Trough wells were drilled in late 1999 and early 2000. The highlights were successful retrievals of abundant gas hydrate-bearing cores in a variety of sediments from the main hole and the post survey well-2, keeping the cored gas hydrate stable, and the obtaining of continuous well log data in the gas hydrate-dominant intervals from the main hole, the post survey well-1 and the post survey well-3. Gas-hydrate dominant layers were identified at the depth interval from 205 to 268 mbsf. Pore-space hydrate, very small in size, was recognized mostly filling intergranular pores of sandy sediments. Anomalous chloride contents in extracted pore water, core temperature depression, core observations as well as visible gas hydrates confirmed the presence of pore-space hydrates within moderate to thick sand layers. Gas hydrate-bearing sandy strata typically were 10 cm to a meter thick with porosities of about 40 %. Gas hydrate saturations in most hydrate-dominant layers were quite high, up to 90 % pore saturation.
All the gas hydrate-bearing cores were subjected to X-ray CT imagery measurements for observation of undisturbed sedimentary textures and gas-hydrate occurrences before being subjected to other analyses, such as (1) petrophysical properties, (2) biostratigraphy, (3) geochemistry, (4) microbiology and (5) gas hydrate characteristics.     

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.     

The interplay and effects of deformation and crystallized melt on the rheology of the lower continental crust,Fiordland, New Zealand

Microstructural, electron backscatter diffraction (EBSD), and misorientation analyses of a migmatitic granulite-facies orthogneiss from the exhumed lower crust of a Cretaceous continental arc in Fiordland, New Zealand show how deformation was accommodated during and after episodes of melt infiltration and high-grade metamorphism. Microstructures in garnet, omphacite, plagioclase, and K-feldspar suggest that an early stage of deformation was achieved by dislocation creep of omphacite and plagioclase, with subsequent deformation becoming partitioned into plagioclase. Continued deformation after melt infiltration resulted in strain localization in the leucosome of the migmatite, where a change of plagioclase deformation mechanism promoted the onset of grain boundary sliding, most likely accommodated by diffusion creep, in fine recrystallized plagioclase grains. Our results suggest three distinctive transitions in the rheology of the lower crust of this continental arc, where initial weakening was primarily achieved by deformation of both omphacite and plagioclase. Subsequent strain localization in plagioclase of the leucosome indicates that the zones of former melt are weaker than the restite, and that changes in deformation mechanisms within plagioclase, and an evolution of its strength, primarily control the rheology of the lower crust during and after episodes of melting and magma addition.     

X射线衍射技术应用于宝石鉴定-合成及晶体结构研究进展

因宝石检测常附带无损要求、宝石评价具科学性和不确定性等特点,X射线衍射(XRD)在宝石学这门矿物学的分支学科中的应用具有特殊性,其应用领域主要集中在三个方面。①宝石鉴定领域:对单晶宝石和多晶宝石进行物相鉴定、宝石产地特征研究以及宝石矿物多型的种类划分等。例如根据XRD图谱,可将品种繁多的微晶石英隐晶质变种玉髓中不同的SiO₂质矿物相精确区分;通过黏土矿物成分及其含量可将鸡血石中"地"的种类进行划分。②宝石矿物的晶体结构研究:对成分复杂的单晶宝石进行晶体化学分析、获取矿物类质同象替代情况、利用结晶度划分宝石品质。例如晶格参数中的c/a比值可将绿柱石的Al八面体类质同象替代和Be四面体类质同象替代进行区分;软玉中通过XRD数据计算出的结晶度与软玉的品质关系密切。③宝石学研究技术的开发:对宝石的优化处理过程进行监测,在宝石合成过程中检验矿物晶形大小、结晶质量及内应力等,以有机宝石的晶体结构为基础的人工养殖技术研究。例如尖晶石在热处理过程中,Mg离子由四面体中的T位迁移至八面体中的M位,导致M-O和T-O键长随温度变化,并反映在尖晶石的色调中;在托帕石合成过程中,XRD数据显示770~800℃时形成含氟托帕石(与天然托帕石结构相同),而在950℃和1000℃出现含氟托帕石离解成刚玉和莫来石。目前,我国在宝石学的XRD应用方面起步较晚,国外在宝石鉴定、优化与合成方面的应用相对成熟。本文认为,该技术与扫描电镜、质子探针等分析技术的联用仍有很大发展空间。