Advances in energy-dispersive X-ray fluorescence

Recently, two new instruments for X-ray fluorescence analysis (XRF) with interesting features for geochemical applications came to the market. Both instruments were designed to improve the peak to background ratio, the principal factor limiting the sensitivity of XRF. Total reflection XRF (TXRF) was designed to analyse extremely small sample amounts. An instrument, using polarised X-rays (P-XRF) for excitation, is designed to reduce scattered background in spectra of bulk samples. The performance of both instruments was compared with conventional XRF-methods and ICP/MS. Results for GXR-1, GXR-2, GXR-3, GXR-4 and GXR-6 obtained with TXRF and P-XRF are in good agreement with literature data. The effective amount of sample, analysed by TXRF was 200 μg only and detection limits of ~ l μg/g were achieved. P-XRF shows considerable improved detection limits (0.25–0.5 μg/g) for bulk samples for elements with atomic numbers 42–51 (Mo-Sb) compared with conventional XRF-methods.     

X射线荧光测井井液的影响与校正

X射线荧光测井中 ,井液位于井下探管与井壁之间 ,它的影响不但表现在对特征X射线的吸收 ,而且表现在对源初级射线和特征 X射线的散射。井液的校正采用硬件与软件相结合的方法 ,在硬件上 ,使含有探测器的部分制成单独的短臂 ,有效地保证了探测窗与井壁的良好接触 ;在软件上 ,提出的双散射峰法和散射峰 -逃逸峰法 ,能够校正 0 - 10 mm厚的井液对 X射线荧光测井结果的影响     

Surface chemical analysis in coal preparation research: complementary information from XPS and ToF-SIMS

The application of X-ray photoelectron spectroscopy (XPS) to coal surface characterisation for preparation research is described. Progress towards the acquisition of complementary surface chemical information by time-of-flight secondary ion mass spectrometry (ToF-SIMS) is also discussed. Surface-based beneficiation techniques such as flotation are assuming greater importance as the proportion of fines in raw coal increases due to the proliferation of high capacity mining methods. A necessary condition for the floatability of a coal particle is adequate hydrophobicity, and the degree of hydrophobicity of the flotation concentrate is one factor influencing the ease with which its dewatering can be affected. The hydrophobicity of a coal is very difficult to measure directly because of microporosity, and it is often necessary to deduce the degree of hydrophobicity from a knowledge of the surface chemistry. XPS is able to provide sufficient analytical data to allow relative levels of hydrophobicity to be estimated. In principle, ToF-SIMS should be able to supply additional information enabling refinement of such estimates; however, there are insufficient data at present to allow the ionic fragments detected to be related to specific functional groups at the coal surface.     

X射线荧光测井的井液效应及其校正

本文从Ｘ射线的性质，以及Ｘ射线与物质作用的机理出发，对井液效应进行了研究，并对其影响过程进行模拟。在理想井液模型上，推导出Ｘ射线活度与钻孔参数的数理关系。在此基础上，进一步研究得到了能适应野外多变情况的井液效应校正公式（ＣＢＷＥ）和方法。     

原位磁化X射线粉末衍射法测还原铁粉的微观磁致伸缩系数

首次报导X射线粉末衍射法测量铁粉晶胞的磁致伸缩系数。还原铁粉样品原位磁化后 ,铁立方晶胞产生磁致伸缩效应 ,晶胞参数的变化引起衍射峰位置和晶面间距的变化。实验测得铁晶胞λ1 0 0 为 3 .3 3× 10 - 4,此结果表明铁晶胞的微观磁致伸缩系数比棒状、薄膜或粉末压片的系数大约 16倍。对此现象进行了合理的理论解释 ,指出大块材料中的粉末多晶之间具有较大的空隙 ,从而使得宏观磁致伸缩系数变小     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

2004欧洲X射线光谱分析会议

介绍了2004欧洲X射线光谱分析会议的简况和会议所讨论的热点问题。利用聚合毛细管X射线透镜进行微区分析是近期X射线领域最受关注的热点。     

Electron microscopy study of the sakhaite from endogenous borate deposit in Hunan, China

Sakhaite was first discovered by Ostrovskaya, Pertsev and Nikitina at Siberia in the former Soviet Union. By using the X-ray diffraction technique, they proved that the crystal system of sakhaite was cubic (a = 1.464 nm), its possible space groups were Fm3m, F432, F43m, Fm3, F23, and its crystal chemical for-mula was Ca48Mg16(CO3)16(BO3)28Cl4(OH)8 4H2O[1]. Chichagov, Simonov and Belov studied the crystal structure of synthetic sakhaite and determined that its space group was F4132, …     

The effect of an interface boundary layer on the resonance properties of a buried structure

This paper presents a model for the analysis of the diffraction of plane waves at a cavity in an infinite homogeneous linear elastic medium supported by a segmented lining. An elastic boundary layer is introduced between the cavity lining and the infinite medium. The boundary layer is simulated by ‘elastic boundary conditions’ in which the stress is proportional to the relative displacement of the lining and of the surrounding medium boundary. A closed‐form analytical solution of the problem was obtained using the Fourier–Bessel series, the convergence of which was proven. It was shown that the number of series terms required to obtain a desired level of accuracy can be determined in advance. Using amplitude–frequency response analysis it was shown that the boundary layer produces additional ‘pseudo‐resonance’ frequencies that depend on the layer properties. These frequencies are almost identical to the eigenvalues obtained from the simple analysis of a segmented elastically supported lining. Copyright © 2003 John Wiley & Sons, Ltd.     

高倍稀释熔融制样X射线荧光光谱测定钨砂和铬铁矿中主含量

用X射线荧光光谱测定钨砂中WO3和铬铁矿中Cr2O3,通过高倍稀释熔融玻璃片制样法,采用高纯WO3或Cr2O3作单一标准样测量X射线荧光强度计数,然后同未知样品测量所得X射线荧光强度计数相比,即可计算出WO3和Cr2O3的测量值.方法用于钨砂矿和铬铁矿中WO3和Cr2O3的测定,结果与标准值相符.