Reconstructing spatio-temporal patterns of debris-flow activity using dendrogeomorphological methods

Debris flows are a major threat in many parts of the Alps, where they repeatedly cause severe damage to infrastructure and transportation corridors or even loss of life. Nonetheless, the spatial behavior of past debris-flow activity and the analysis of areas affected during particular events have been widely neglected in reconstructions so far. It was therefore the purpose of this study to reconstruct spatio-temporal patterns of past debris flows on a forested cone in the Swiss Alps (Bruchji torrent, Blatten, Valais). The analysis of past events was based on a detailed geomorphic map (1:1000) of all forms related to debris flows as well as on tree-ring series from 401 heavily affected trees (Larix decidua Mill. and Picea abies (L.) Karst.) growing in or next to deposits. The samples were analyzed and growth disturbances related to debris-flow activity assessed, such as tangential rows of traumatic resin ducts, the onset of reaction wood or abrupt growth suppression or release.In total, 960 growth disturbances were identified in the samples, belonging to 40 different event years between A.D. 1867 and 2005. In addition, the coupling of tree-ring data with the geomorphic map allowed reconstruction of eleven formerly active channels and spatial representation of individual events. Based on our results we believe that before 1935, debris flows preferentially used those channels located in the western part of the cone, whereas the eastern part of the cone remained widely unaffected. The spatial representation of the 40 events also allowed identification of five different spatial patterns for debris flows at the study site.     

Significance of variations in the wind energy environment over the past 50 years with respect to dune activity and desertification in arid and semiarid northern China

Climate data from 339 meteorological stations collected from the 1950s to the early 2000s was employed to discuss aeolian activity in arid and semiarid northern China. The results show that at decadal time scales, erosivity varied greatly in this region. Most of arid and semiarid northern China was characterised by environments with moderate to low wind energy. After the 1980s, the erosivity was only 20 to 50% of that beforehand, and this difference had a significant impact on the environmental changes observed during the two periods. The dune mobility index was consistent with the observed dune activity. After the 1980s dune activity decreased and in some deserts with vegetated dune systems during the 1970s most of the dune plinths were active until the 1980s, after which only the crests were active. Some mobile dunes that had developed at the margins of mobile deserts were replaced by semi-anchored or anchored dunes. Because most desert areas with vegetated dune systems in arid and semiarid northern China are used for farming or grazing, the results of our monitoring show that the desertification trends were consistent with the trends in erosivity and dune activity in this region. Desertification was controlled much more by climatic changes than has previously been acknowledged, and especially by fluctuations in wind energy.     

Spatial Analysis Techniques as Successful Mineral-Potential Mapping Tools for Orogenic Gold Deposits in the Northern Fennoscandian Shield,Finland

Geoscientific Information Systems (GIS) provide tools to quantitatively analyze and integrate spatially referenced information from geological, geophysical, and geochemical surveys for decision-making processes. Excellent coverage of well-documented, precise and good quality data enables testing of variable exploration models in an efficient and cost effective way with GIS tools. Digital geoscientific data from the Geological Survey of Finland (GTK) are being used widely as spatial evidence in exploration targeting, that is ranking areas based on their exploration importance. In the last few years, spatial analysis techniques including weights-of-evidence, logistic regression, and fuzzy logic, have been increasingly used in GTK’s mineral exploration and geological mapping projects. Special emphasis has been put into the exploration for gold because of the excellent data coverage within the prospective volcanic belts and because of the increased activity in gold exploration in Finland during recent years. In this paper, we describe some successful case histories of using the weights-of-evidence method for the Au-potential mapping. These projects have shown that, by using spatial modeling techniques, exploration targets can be generated by quantitatively analyzing extensive amounts of data from various sources and to rank these target areas based on their exploration potential.     

Spatial variability of liquefaction potential in regional mapping using CPT and SPT data

Cone penetration test (CPT) and standard penetration test (SPT) are widely used for the site specific evaluation of liquefaction potential and are getting increased use in the regional mapping of liquefaction hazard. This paper compares CPT and SPT-based liquefaction potential characterizations of regional geologic units using the liquefaction potential index (LPI) across the East Bay of the San Francisco Bay, California, USA and examines the statistical and spatial variability of LPI across and within geologic units. Overall, CPT-based LPI characterizations result in higher hazard than those derived from the SPT. This bias may result from either mis-classifications of soil type in the CPT or a bias in the CPT simplified procedure for liquefaction potential. Regional mapping based on cumulative distribution of LPI values show different results depending on which dataset is used. For both SPT and CPT-based characterizations, the geologic units in the area have broad LPI distributions that overlap between units and are not distinct from the population as a whole. Regional liquefaction classifications should therefore give a distribution, rather than a single hazard rating that does not provide for variability within the area. The CPT-based LPI values have a higher degree of spatial correlation and a lower variance over a greater distance than those estimated from SPTs. As a result, geostatistical interpolation can provide a detailed map of LPI when densely sampled CPT data are available. The statistical distribution of LPI within specific geologic units and interpolated maps of LPI can be used to understand the spatial variability of liquefaction potential.     

Field‐based and spectral indicators for soil erosion mapping in semi‐arid mediterranean environments (Coastal Cordillera of central Chile)

The Coastal Cordillera of central Chile is naturally sensitive to soil erosion due to moderate to steep slopes, intense winter rains when the vegetation cover is scarce, and deeply weathered granitic rocks. In 1965, 60 per cent of its surface was moderately to very severely eroded. Today this process is still largely active, but no data are currently available to evaluate the real extent, distribution and severity of soil degradation on a regional scale. This information is vital to support efficient soil conservation plans. A multi‐scale approach was implemented to produce regional land degradation maps based on remote sensing technologies. Fieldwork has shown that the surface colour or ‘redness’ and the density of coarse fragments are pertinent erosion indicators to describe a typical sequence of soil degradation in the context of mediterranean soil developed on granitic materials and micaschists. Field radiometric experiments concluded that both factors influence the reflectance of natural surfaces and can be modelled using radiometric indices accessible from most satellites operating in the optical domain, i.e. redness index and brightness index. Finally the radiometric indices were successfully applied to SPOT images to produce land degradation maps. Only broad classes of erosion status were discriminated and the detection of the degradation processes was only possible when most of the fertile layer had already been removed. This technology provides decision‐making information required to develop regional soil conservation plans and to prioritize actions between catchment areas, especially in vast inter‐tropical regions where spatialized data are not always readily available. Copyright © 2006 John Wiley & Sons, Ltd.     

Surface current variability in the Keum River Estuary (South Korea) during summer 2002 as observed by high-frequency radar and coastal monitoring buoy

High-frequency (HF) radar observations of surface currents were conducted for 3 months during summer 2002 in the Keum River estuary. A comparison between HF radar-derived currents and directly measured ones form a buoy showed that the regression slope is close to 1 and the correlation coefficient greater than 0.86, with an RMS difference less than 13 cm/s which is less than 17% of the tidal current. This fairly good agreement allows us to use HF radar observation in investigating the surface flow and circulation in this tidal-current-dominant coastal-plume area. To examine the spatial variation in tidal current characteristics, as well as currents associated with non-tidal forcing, the HF radar-derived currents were separated into tidal and sub-tidal frequency currents. The overall pattern of M₂-current ellipse distribution in the study area showed a counterclockwise rotation, with the offshore maximum current direction to the northeast. Eccentricity, the direction of maximum current, and the phase of net motion of the ellipse changed near the estuary mouth and near the gap of the Saemangeum reclamation tide dyke due to the complex coastal geometry and the out-flowing jet during the ebb period.     

Numerical experiments on the generation of long ocean waves in coastal waters of the Buenos Aires province,Argentina

A numerical model (two horizontal dimensions, vertically integrated) is used to investigate the generation of long ocean waves, ranging from 20 min to almost 2 h, at Buenos Aires continental shelf. The domain includes the Río de la Plata estuary and the continental shelf together and extends from 33.5° to 40.5°S latitude, and from 51° to 63°W longitude. Sea-level oscillations are modeled by forcing with passage of atmospheric cold fronts and atmospheric gravity waves. Both forcing mechanisms, which have been present during high activity lapses of long ocean waves, are mathematically implemented. After several numerical simulations, it is concluded that the pressure and wind fields associated to cold fronts do not generate long ocean waves in the area, though they do produce disturbances with periods longer than the tidal ones. On the other hand, it is so concluded that atmospheric gravity waves are an effective mechanism to force long ocean waves. Results obtained show that generation of long ocean waves is highly sensitive depending on the propagation direction and the phase speed of the atmospheric gravity waves. The long ocean wave event detected during the large-amplitude gravity-wave event of 13 October 1985 is successfully simulated. Finally, all our results suggest that atmospheric gravity waves are a highly effective mechanism forcing for the generation of long ocean waves in Buenos Aires coastal waters.     

三线阵CCD卫星影像的模拟研究

在讨论从给定的DEM和相应的正射影像模拟三线阵CCD卫星影像的原理和方法的基础上，通过模拟影像考察两种卫星影像近似核线的适应能力和地球自转效应对同轨立体成像能力的影响，并讨论了从DEM和正射影像确定投影响中心轨迹、姿态模拟、共线方程和影像生成等细节。通过试验验证了模拟影像的正确性，揭示了两种核线定义存在的问题及其改进方法。     

LD2000 System with 3S and Multi—sensor

This paper introduces a car-borne road information collecting and updating system (LD2000) developed by Wuhan Technical University of Surveying and Mapping.This system is capable of collecting road network information and creating digital road network effectively by means of GPS,GIS and multi-sensor integration.The design and development of LD 2000 system are also presented in this paper.