Reciprocality between biology and geology: Reconstructing polar Gondwana

The reciprocal nature of the relationship between historical geology (reconstruction models) and biology (constructing phylogenies) is discussed and the conceptual basis of such a relationship is examined through its historical development. Examples to illustrate aspects of the relationship are drawn from the Cretaceous breakup of polar Gondwana and the Cenozoic history of some of the resultant microcontinental fragments. A new mid-Cretaceous (circa 100 Ma) rift zone, separating the west Gondwanan Campbell Plateau, southern New Zealand, from the east Gondwanan Melanesian Rift is proposed, and biological and geological evidence for it is presented and discussed. It is also suggested that the Bounty Trough, Chatham Rise, and Hikurangi Plateau unit is incorrectly placed in reconstruction models, and it should be fitted outboard of the Melanesian Rift until its mid-Cenozoic attachment to the Campbell Plateau. It is concluded that both reconstruction modelling and phylogenetic analyses have much to gain through ‘reciprocal illumination’.     

西秦岭北缘新阳—元龙韧性剪切带中花岗质糜棱岩黑云母40Ar 39Ar年龄及地质意义

西秦岭北缘新阳-元龙大型韧性剪切带是分划西秦岭造山带与祁连造山带的区域主构造边界,通过对其物质组成和构造特征的研究,结合两侧不同(洋-陆)构造环境下各类地质体的研究成果,重点对剪切带内花岗质糜棱岩中黑云母单矿物进行了~(40)Ar-~(39)Ar定年研究.在新阳镇和元龙北剪切带中分别获得(347.95±2.17)Ma (MSWD＝1.89)和(351.70±1.72)Ma (MSWD＝0.80)的坪年龄,分析确定其应为黑云母的冷却年龄,表明变形时代应在早石炭世早期之前;反映了最晚在早石炭世早期,该剪切带已横切秦岭与祁连造山带并发生强烈的右行走滑构造拼贴作用.     

Can flat-ramp-flat fault geometry be inferred from fold shape?: A comparison of kinematic and mechanical folds

The inference of fault geometry from suprajacent fold shape relies on consistent and verified forward models of fault-cored folds, e.g. suites of models with differing fault boundary conditions demonstrate the range of possible folding. Results of kinematic (fault-parallel flow) and mechanical (boundary element method) models are compared to ascertain differences in the way the two methods simulate flexure associated with slip along flat-ramp-flat geometry. These differences are assessed by systematically altering fault parameters in each model and observing subsequent changes in the suprajacent fold shapes. Differences between the kinematic and mechanical fault-fold relationships highlight the differences between the methods. Additionally, a laboratory fold is simulated to determine which method might best predict fault parameters from fold shape. Although kinematic folds do not fully capture the three-dimensional nature of geologic folds, mechanical models have non-unique fold-fault relationships. Predicting fault geometry from fold shape is best accomplished by a combination of the two methods.     

江苏西南部晚侏罗世西横山组沉积特征及成因

江苏西南部晚侏罗世西横山组为一套粗碎屑岩—细碎屑岩及泥灰岩组成的陆相沉积岩，普遍含有火山物质。从地层分布、岩性特征、碎屑岩粒度统计分析表明，天生桥盆地和西横山盆地基本上是连续、贯通的，自东向西，由冲积扇相—河流相—湖泊相逐渐过渡，属于同一水中盆地中不同沉积相的产物。沉积物主要来自盆地东部，可能与“古茅山”隆起带有关。     

滇西变泥质岩的白云母b_0值及其构造－地层意义

据３３３个白云母ｂ０值，结合区域地层和构造的研究成果，提出：（１）原称昌宁－孟连变质带解体为西盟－勐统变质带（加里东期中压变质带）和澜沧双变质带的高压亚带，两期高压变质作用分别与海西－印支期的洋壳消减和陆－陆碰撞有关；（２）石鼓变质带是三个逆冲岩片的叠置，各岩片内岩石的变质作用各具特色；（３）金沙江洋盆为地块间小洋盆，其消减及嗣后的弧－弧碰撞可能不产生高压变质作用。在此基础上探讨了白云母ｂ０值在造山带研究中的意义。     

南海东北部新构造运动及其动力学机制

南海东北部地处欧亚板块与菲律宾海板块的交汇区,新构造运动活跃。根据地震活动性、震源机制解和GPS资料对该区的新构造活动特征进行分析,在此基础上讨论该区新构造运动的动力学机制。分析发现,菲律宾海板块NW向俯冲对该区的影响最为显著,导致了该区较强的地震活动性以及与俯冲方向一致的构造应力场。而印藏碰撞产生的侧向应力传递也影响到该区,控制华南地块向SE方向运动,并与菲律宾海板块的NW向俯冲共同作用,使华南地块在SE向运动的同时伴有逆时针旋转。印藏碰撞的SE向应力传递对俯冲产生的NW向水平挤压的抵消作用,使得地震活动性自东向西减弱以及构造应力场P轴方位角顺时针旋转。在这一背景下,区内滨海断裂带的活动控制了该区的地震、海岸带构造升降等新构造运动。     

Relating petroleum system and play development to basin evolution: West African South Atlantic basins

Sedimentary basins can be classified according to their structural genesis and evolutionary history and the latter can be linked to petroleum system and play development. We propose an approach in which we use the established concepts in a new way: breaking basins down into their natural basin cycle division, then defining the characteristics of each basin cycle (including the type of petroleum systems and plays they may contain) and comparing them with similar basin cycles in other basins, thereby providing a means to learn through a greater population of (perhaps not immediately obvious) analogues. Furthermore, we introduce the use of the trajectory plot as a new tool in such an analysis. This methodology has been applied to the West African South Atlantic marginal basins between Cameroon and Angola, and we demonstrate that the similar tectonostratigraphic evolution of the individual basins along this margin has led to the development of similar types of petroleum systems and play (level)s. Consequently, we can make analogue comparisons among these basins in order to evaluate and predict the presence of potential, yet undiscovered, hydrocarbon accumulations in less well explored parts of the margin.     

The permeability of faults within siliciclastic petroleum reservoirs of the North Sea and Norwegian Continental Shelf

Faulting in Middle Jurassic reservoirs occurred at shallow depth during regional extension. Clean sandstones (<15% clay) deformed without significant grain fracturing and permeability reduction. Faults in impure sandstones (15–40% clay) experienced significant syn-deformation compaction and permeability reduction. Enhanced compaction during deeper burial reduced their permeabilities further from an average of 0.05 mD at <2.5 km to 0.001 mD at >4 km. Clay-rich sediments (>40% clay) deformed to produce clay smears with very low permeabilities (<0.001 mD). Faulting in the Rotliegendes occurred at greater depth during both basin extension and inversion. Extensional faulting produced cataclasites with permeability reductions of <10–>10⁶; their permeabilities range from 0.2 to 0.0001 mD and are inversely related to their maximum burial depth. Faults formed or reactivated during inversion experienced permeability increase. These results can be extrapolated to other hydrocarbon reservoirs if differences in stress and temperature history are taken into account.The permeability of most (>80%) faults is not sufficiently low, compared to their wallrock, to retard single-phase fluid flow on a km-scale. Nevertheless, most faults could retard the flow of a non-wetting phase if present at low saturations. It may be necessary to incorporate the two-phase fluid flow properties of fault rocks into reservoir simulators using upscaling or pseudoisation techniques. Fault property data should be calibrated against production data before it can be used confidently.     

云南中甸-大具断裂上新发现的地震地表破裂带

中甸-大具断裂是川滇菱形块体的西南边界,总体走向310°—320°。近年来我们对该断裂进行了1:50000条带状地质填图,发现了断裂活动的地质地貌证据。其中,在丽江大具盆地内（金沙江右岸）沿断裂新发现一处典型地震地表破裂带,长约600m,宽120m左右,主要表现为地表挤压鼓包、挤压垄脊、张裂缝、挤压阶区等,呈NW走向,与中甸-大具断裂走向基本一致。野外工作中,我们详细记录和测量了地表破裂的破裂样式、破裂规模和相关定量数据,利用旋翼无人机测绘了地表破裂带的形态和展布,获得了高精度DEM,分析了地表破裂表现出的运动性质。在已有资料的基础上讨论了地表破裂的形成时代、归属、震级大小,简要分析了其发震断层。新地震地表破裂带的发现为进一步研究中甸-大具断裂活动特征、古地震及地震危险性提供了基础资料。     

长白山天池火山西南麓水压致裂法地应力测量及其实测数据在断裂稳定性分析中的应用

长白山天池火山是一座新生代多成因复合火山, 其活动性一直受到地学界的高度重视.而地应力测量数据对于了解火山的活动情况等具有重要意义, 但目前长白山天池火山地区实测地应力资料较少.为了更准确地了解长白山天池火山地区现今地应力状态及断裂稳定性, 在长白山天池火山西南麓MJZ测点0~300 m孔深开展了水压致裂法地应力测量.利用此次实测地应力数据, 本文首先分析了该地区地壳浅表层应力状态, 结果表明: ①测区以水平构造应力为主导, 应力值与其他地区相比, 相对较低; ②S_H(最大水平主应力)、S_h(最小水平主应力)和S_v(垂向主应力)均随深度增加而基本呈线性增大趋势; 在60~180 m深度, 三者展现为逆断层应力状态, 即S_H＞S_h＞S_v; 在180~300 m, 则表现为S_H＞S_v＞S_h, 该应力关系有利于走滑断层活动; ③钻孔上部S_H方向为N38°E, 与东北地区构造应力场方向基本一致.钻孔下部由于受区内NW向断裂和其他因素影响, 存在与区域主应力方向有偏差的局部应力场.其次, 基于实测应力数据, 应用库仑摩擦滑动准则, 并取摩擦系数为0.6和1.0, 初步评价了区域断裂的稳定性.结果显示, 研究区现今应力状态尚未达到断裂失稳滑动水平, 推测测区断裂目前相对稳定.结合其较低的应力积累水平, 一定程度上反映出长白山天池火山区目前没有明显活动, 地壳总体是稳定的.本文的研究结果可为长白山天池火山的活动性、地震地质等研究提供地应力方面的基础数据, 同时也为测区地质环境安全评价提供参考依据.