Numerical Simulation of Bed Separation Development and Grout Injecting into Separations

In this paper, the Cosserat theory that has been incorporated into a three dimensional finite element code COSFLOW, is applied to analyze the development of bed separations in the layered overburden and grout injection into the bed separations. The mechanism of bed separation development during the longwall mining is investigated. A parametric study is carried out to investigate the effect of major factors including hard rock grade, panel height and panel weight on bed separation development. Based on the modeling, a conceptual model to describe the development process of bed separation is proposed. The effect of grout injecting into the bed separations on subsidence reduction is also studied and the conclusion agrees well with the common realization.     

井间电磁成像系统应用研究

井间电磁（EM）成像系统的技术目标是实现井间电学特性的直接测量,并提供井间电阻率的二维及三维图像.从1997年开始,胜利油田与美国EMI公司合作,开展了EM技术的应用与研究,主要是通过大型、系统的现场试验,在大井间距的条件下,进一步验证仪器的性能,进行油藏研究的适用性和可行性分析;以系统的现场实测数据为依据,加快成像处理方法和软件的开发;开展穿透金属套管井的EM试验,探讨金属套管条件下的电阻率成像方法。两年来,利用EMI提供的XBH2000型测量系统,对胜利油田典型的低电阻率砂泥岩剖面,成功地进行了3对井、10个井次的试验。试验证明了仪器性能的可靠,取得了测量重复性好、系统完整的井间EM数据.并反演得到电阻率成像,在分析井间油气分布和油层开采动态方面,取得了良好的地质效果.     

活性炭吸附分离—分光光度法测定硫化矿和土壤中的痕量铊

详细研究并确定了在HCl介质中,活性炭吸附Tl及草酸铵解吸Tl的诸条件,使T1与干扰元素分离而预富集,回收率在99.6%～116.3%.以镉试剂2B为显色剂,准确测定了硫化矿和土壤中的Tl.考察了两个样品测定5次的相对标准偏差＜6%,试样分析结果与原子吸收法、等离子体质谱法及泡沫塑料吸附分离-镉试剂2B光度法结果基本一致.     

基于MGE的数字地图制图系统若干关键技术

本文在综述数字地图技术功能、特征、发展现状的基础上,介绍了ＭＧＥ数字地图制图系统的体系结构、技术流程和特点,进而从地图数据输入/数字化技术(包括地图的扫描输入、数字影像数据的输入处理、航摄资料的立体数字化、地图/ＧＩＳ数据库的提取４种)、地图色彩库和符号库的制作、地图组版和分色制版关键技术(分为一般地图、影像地图、图－文－图片混排地图等几种类型地图的组版和分色制版,以及一些特殊制图效果的实现技术等)、印刷地图与电子地图的互相转换等方面阐述了基于ＭＧＥ的数字地图制图系统的若干关键技术问题。这些技术对于数字地图环境的地图设计、编辑、印前处理等许多方面都有参考作用。最后,本文对于数字地图一体化的技术进行了展望。     

Selection of Multifractal Scaling Breaks andSeparation of Geochemical andGeophysical Anomaly

1Multifractalities have been observed and estimated formany quantities in physics, chemistry, as well as earth andspace sciences (see a review in Agterberg, 20011 Cheng,1999al Agterberg et al., 1993 1 Schertzer and Love joy, 1991).The multifractal theory has provided a superior distributiontype for describing the complex measures in comparison withthe ordinary statistical distributions. The former usually involves the multiple moments and parameters (Cheng, 1999alAgterberg et al., 1993 1 Sc…     

Fumarolic activity of Avachinsky and Koryaksky volcanoes, Kamchatka, from 1993 to 1994

 Volcanic gas and condensate samples were collected in 1993–1994 from fumaroles of Koryaksky and Avachinsky, basaltic andesite volcanoes on the Kamchatka Peninsula near Petropavlovsk–Kamchatsky. The highest-temperature fumarolic discharges, 220  °C at Koryaksky and 473  °C at Avachinsky, are water-rich (940–985 mmol/mol of H₂O) and have chemical and isotopic characteristics typical of Kamchatka–Kurile, high- and medium-temperature volcanic gases. The temperature and chemical and water isotopic compositions of the Koryaksky gases have not changed during the past 11 years. They represent an approximate 2 : 1 mixture of magmatic and meteoric end members. Low-temperature, near-boiling-point discharges of Avachinsky Volcano are water poor (≈880 mmol/mol); Their compositions have not changed since the 1991 eruption, and are suggested to be derived from partially condensed magmatic gases at shallow depth. Based on a simple model involving mixing and single-step steam separation, low water and high CO₂ contents, as well as the observed Cl concentration and water isotopic composition in low-temperature discharges, are the result of near-surface boiling of a brine composed of the almost pure condensed magmatic gas. High methane content in low-temperature Avachinsky gases and the 220  °C Koryaksky fumarole, low C isotopic ratio in CO₂ at Koryaksky (–11.8‰), and water isotope data suggest that the "meteoric" end member contains considerable amounts of the regional methane-rich thermal water discovered in the vicinity of both volcanoes. Received: 2 May 1996 / Accepted: 5 November 1996     

辅助模型辨识方法(3):输入非线性输出误差自回归系统

输入非线性系统包括输入非线性方程误差类系统和输入非线性输出误差类系统.针对输入非线性输出误差自回归系统,分别基于过参数化模型,基于关键项分离原理,基于数据滤波技术,研究了相应的基于过参数化模型的辅助模型递推辨识方法、基于关键项分离的辅助模型递推辨识方法、基于数据滤波的辅助模型递推辨识方法.这些方法可以推广到其他输入非线性输出误差系统、输出非线性输出误差系统、反馈非线性系统等.并给出了几个典型辨识算法的计算步骤、流程图和计算量.     

溶剂萃取法分离锂同位素研究进展

锂同位素(6Li和7Li)在原子能工业中占据着重要的地位。在众多锂同位素的分离方法和体系中,溶剂萃取法是一种具有较高分离系数,并最有望实现无毒、高效分离的工业生产方法。阐述了溶剂萃取法分离锂同位素的原理,综述了醇类与酮类、烷基膦与膦酸脂类、冠醚类及其它溶剂萃取体系在锂同位素分离中的研究现状及趋势,并展望了溶剂萃取法在锂同位素分离和未来青海、西藏盐湖锂资源高值化利用中的潜在应用前景。     

基于ASTER GED产品的地表发射率估算

地表发射率是地表温度反演的重要输入参数,为了解决现有地表发射率估算方法在裸露地表精度较差的问题,本文基于最新的ASTER全球地表发射率产品(ASTER GED)和基于植被覆盖度的方法(VCM),提出了一个改进的地表发射率估算方法。首先,利用ASTER GED产品求解裸土发射率,然后,利用ASTER波谱库中的植被发射率和植被覆盖度结合VCM方法计算地表发射率。利用张掖地区2012年11景ASTER TES算法反演的地表发射率产品和实测地表发射率数据进行了验证,同时利用一景Landsat 8 TIRS数据分析了对地表温度反演精度的影响。结果表明该方法估算的地表发射率整体精度较高,可以有效改进裸露地表的发射率估算精度,用于支持利用多种热红外传感器数据生产高精度的地表温度产品。     

A case study for the effect of a flow improvement device (a partial wake equalizing duct) on ship powering characteristics

A case study for the energy saving in the powering characteristics of a river going general cargo ship has been carried out. Two different hull forms were generated from the original hull form of the vessel to optimise the stern flow of the vessel. A possible energy saving concept, such as partial wake equalizing duct was investigated in this manner. Resistance, self-propulsion and flow visualization measurements were performed with the hull models to explore the effect of partial wake equalizing ducts on the powering characteristics of the hull form. Analysis of the results indicates that the partial wake equalizing duct concept with an appropriate stern design affect not only the flow characteristics at aft-end, but also the propulsion characteristics. In order to identify effect of each component (partial wake equalizing duct and stern form) a further investigation is needed.