ATON型Hall推力器缓冲区预电离问题研究

ATON是20世纪90年代新提出的一种Hall推力器设计方案,其中的缓冲区是ATON新采用的一种结构.本文对缓冲区的作用进行分析,在此基础上提出了采用附加电源提高缓冲区预电离率的方法.并采用PIC(Particle-in-cell)粒子模拟方法对这种设计方式的等离子体分布进行数值模拟.结果表明,通过增加缓冲区内的附加电压,能够有效地提高缓冲区预电离率.     

Observations and analyses of floc size and floc settling velocity in coastal salt marsh of Luoyuan Bay, Fujian Province, China

In coastal environments, fine-grain sediments often aggregate into large and porous flocs. ElectroMagnetic Current Meters (EMCM) and Laser In Situ Scattering and Transmissometry (LISST-ST) have been deployed within a Spartina alterniflora marsh of the Luoyuan Bay in Fujian Province, China, to measure the current velocity, the floc size and the settling velocity between 15 and 22 January 2008. During the observations, the near-bed water was collected in order to obtain the suspended sediment concentration (SSC) and constituent grain size. Data show that: (1) the nearbed current velocities vary from 0.1 to 5.6 cm/s in the central Spartina alterniflora marsh and 0.1–12.5 cm/s at the edge; (2) the SSCs vary from 47 to 188 mg/dm 3 . The mean grain size of constituent grains varies from 7.0 to 9.6 μm, and the mean floc sizes (MFS) vary from 30.4 to 69.4 μm. The relationship between the mean floc size and settling velocity can be described as: w s =ad b , in which w s is the floc settling velocity (mm/s), a and b are coefficients. The floc settling velocity varies from 0.17 to 0.32 mm/s, with a mean value of 0.26 mm/s, and the floc settling velocity during the flood tide is higher than that during the ebb tide. The current velocity and the SSC are the main factors controlling the flocculation processes and the floc settling velocity.     

深海沉积物分类与命名的参数指标和主成分分析

对于南海中部(118个表层沉积物样,水深82~4 420 m)、东部(106个表层沉积物样,水深700~4 508 m)海域的表层沉积物的粒度资料按小于200 m,200~2 000 m,大于2 000 m水深段对水深、平均粒径、黏土含量进行统计分析,结果表明从陆架到陆坡再到深海,平均粒径和黏土含量随水深增加呈非常有规律的变化;把大于2 000 m水深区域再细分为大于2 500 m,大于3 000 m,大于3 500 m,结果表明平均粒径和黏土含量随水深增加几乎无变化,在南海中部水深大于2 000 m海域平均粒径为3.39~3.54μm,黏土平均含量为54.91%~55.47%;在南海东部水深大于2 000 m海域平均粒径为3.25~3.37μm,黏土平均含量为53.91%~54.56%。研究表明2 000 m水深具有划分深海沉积物的指示意义。南海中部水深大于2 000 m海域黏土平均含量为55.19%,平均粒径为3.39μm;在南海东部水深大于2 000 m海域黏土平均含量为53.91%,平均粒径为3.37μm;在南海中部、东部水深大于2 000 m海域平均粒径均小于4μm,黏土平均含量均大于50%,表明深海沉积物粒度特征是平均粒径小于4μm和黏土平均含量大于50%。黏土含量是非生物组分的代表和划分深海沉积物类型的一个独立参数,钙质生物和硅质生物组分是另外两个独立参数。南海东部海域表层沉积物中55种元素总含量为47.50%,硅、铝、钛、钠、钾、磷、钙、镁、铁、锰十种主元素含量为47.03%,其他45种元素含量为0.47%,虽然沉积物来源复杂、成因不同,但沉积物化学主成分并不复杂,主要由前10种主元素和氧元素组成。沉积物主元素铝、钙、硅分别富集于黏土、钙质沉积、硅质沉积中。通过建立沉积物生源组分与碳酸钙、三氧化二铝、二氧化硅的量化关系,可把碳酸钙、生物二氧化硅作为钙质生物和硅质生物的两个替代参数。     

Distribution of the organic matter in the channel-levees systems of the Congo mud-rich deep-sea fan (West Africa). Implication for deep offshore petroleum source rocks and global carbon cycle

The quantity and the source of organic matter preserved in the Recent turbiditic channel-levees systems around 4000 m-depth off the Congo River were determined using bulk geochemical approaches (Rock-Eval, elemental and isotopic analyses) as well as molecular and optical analyses on selected samples. These mud-rich sediments contain high amount of organic matter (3% Corg on average), the origin of which is a mixture of terrestrial higher-plant debris and deeply oxidized phytoplanktonic material. Although the relative contribution of continental source versus marine source of the organic matter cannot be precisely quantified, the continental fraction appears significant (at least 70–80%) especially for such depths and distances from the coast. The organic matter distribution appears very homogeneous at different scales, from the single turbiditic event to the entire levee, and changes in accumulation rates have a little impact on the quantity and quality of preserved organic matter.     

Storm surge induced flux through multiple tidal passes of Lake Pontchartrain estuary during Hurricanes Gustav and Ike

In September 2008, Hurricanes Gustav and Ike generated major storm surges which impacted the Lake Pontchartrain estuary in Louisiana. This paper presents analyses of in situ measurements acquired during these storm events. The main data used in the analyses were from three bottom mounted moorings equipped with conductivity, temperature, and depth sensors, acoustic Doppler current profilers (ADCPs), and a semi-permanent laterally mounted horizontal acoustic Doppler profiler (ADP). These moorings were deployed in the three major tidal channels that connect Lake Pontchartrain with the coastal ocean. A process similar to tidal straining was observed: the vertical shear of the horizontal velocity was negligible during the inundation stage, but a shear of 0.8 m/s over a less than 5 m water column was recorded during the receding stage, 2–3 times the normal tidal oscillations. The surge reached its peak in the Industrial Canal 1.4–2.1 h before those in the other two channels. The inward flux of water lasted for a shorter time period than that of the outward flux. The inward flux was also observed to have much smaller magnitude than the outward flux (∼960–1200 vs. 2100–3100 million m³). The imbalance was believed to have been caused by the additional water into Lake Pontchartrain through some small rivers and inundation over the land plus rainfall from the hurricanes. The flux through the Industrial Canal was 8–12%, while the flux through the other two tidal passes ranged between 17% and 70% of the total, but mostly split roughly half-half of the remaining (∼88–92% of the total).     

Tsunami-like solitary waves impinging and overtopping an impermeable seawall: Experiment and RANS modeling

This study investigates tsunami-like solitary waves impinging and overtopping an impermeable trapezoidal seawall on a 1:20 sloping beach. New laboratory experiments are performed for describing three typical cases: a turbulent bore rushes inland and subsequently impacts and overtops the seawall (Type 1); a wave directly collapses on the seawall and then generates overtopping flow (Type 2); and, a wave straightforwardly overtops the seawall crown and collapses behind the seawall (Type 3). A two-dimensional volume of fluid (VOF) type model called the COBRAS (COrnell BReaking And Structure) model, which is based on the Reynolds-Averaged Navier–Stokes (RANS) equations and the k–ε turbulence closure solver, is validated by experimental data and then applied to investigate wave dynamics for which laboratory data are unavailable. Additionally, a set of numerical experiments is conducted to examine the dynamic wave acting force due to waves impacting the seawall. Effects of wave nonlinearity and freeboard are elucidated. Special attention is given to a distinct vortex evolutionary behavior behind the seawall, in which the dynamic properties of entrapped air-bubbles are briefly addressed experimentally and numerically.     

The form of the asymptotic depth-limited wind-wave spectrum: Part III — Directional spreading

The directional spreading of both the wavenumber and frequency spectra of finite-depth wind generated waves at the asymptotic depth limit are examined. The analysis uses the Wavelet Directional Method, removing the need to assume a form for the dispersion relationship. The paper shows that both the wavenumber and frequency forms are narrowest at the spectral peak and broaden at wavenumbers (frequencies) both above and below the peak. The directional spreading of the wavenumber spectrum is bi-modal above the spectral peak. In contrast, the frequency spectrum is uni-modal. This difference is shown to be the result of energy in the wind direction being displaced from the linear dispersion shell. A full parametric relationship for the directional spreading of the wavenumber spectrum is developed. The analysis clearly shows that typical dispersion relationships are questionable at high frequencies and that such effects can be significant. This result supports greater attention being focussed on the routine recording of wavenumber spectra, rather than frequency spectra.     

Some statistical characteristics of large deepwater waves around the Korean Peninsula

The relationship between significant wave height and period, the variability of significant wave period, the spectral peak enhancement factor, and the directional spreading parameter of large deepwater waves around the Korean Peninsula have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relationship between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The probability density function of the peak enhancement factor is expressed as a lognormal distribution, with its mean value of 2.14, which is somewhat smaller than the value in the North Sea. For relatively large waves, the probability density function of the directional spreading parameter at peak frequency is also expressed as a lognormal distribution.     

Breaking wave loads at vertical seawalls and breakwaters

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.