赤潮生物种类特征光谱获取技术

较为系统地研究了赤潮生物水体反射率曲线获取方法。通过对 2类反射率反演方法得出的反射率曲线与实际反射率曲线进行比较 ,得出在不具备大气环境参数的情况下 ,经验线性法的反演结果与实际反射率曲线最接近的结论 ,并进一步对正常海水和赤潮生物水体的光谱特性进行分析 ,提取出赤潮生物水体的特征光谱。这是进行赤潮监测和识别的重要前提     

Rifting to Spreading Process along the Northern Continental Margin of the South China Sea

Understanding the development from syn-rift to spreading in the South China Sea (SCS) is important in elucidating the western Pacific's tectonic evolution because the SCS is a major tectonic constituent of the many marginal seas in the region. This paper describes research examining the transition from rifting to spreading along the northern margin of the SCS, made possible by the amalgamation of newly acquired and existing geophysical data. The northernmost SCS was surveyed as part of a joint Japan-China cooperative project (JCCP) in two phases in 1993 and 1994. The purpose of the investigation was to reveal seismic and magnetic characteristics of the transitional zone between continental crust and the abyssal basin. Compilation of marine gravity and geomagnetic data of the South China Sea clarify structural characteristics of its rifted continental and convergent margins, both past and present. Total and three component magnetic data clearly indicate the magnetic lineations of the oceanic basin and the magnetic characteristics of its varied margins. The analyses of magnetic, gravity and seismic data and other geophysical and geological information from the SCS led up to the following results: (1) N-S direction seafloor spreading started from early Eocene. There were at least four separate evolutional stages. Directions and rates of the spreading are fluctuating and unstable and spreading continued from 32 to 17 Ma. (2) The apparent difference in the present tectonism of the eastern and western parts of Continent Ocean Boundary (COB) implies that in the east of the continental breakup is governed by a strike slip faulting. (3) The seismic high velocity layer in the lower crust seems to be underplated beneath the stretched continental crust. (4) Magnetic anomaly of the continental margin area seems to be rooted in the uppermost sediment and upper part of lower crust based on the tertiary volcanism. (5) Magnetic quiet zone (MQZ) anomaly in the continental margin area coincides with COB. (6) The non-magnetic or very weakly magnetized layer is probably responsible for MQZ. One of the causes of demagnetization of the layer is due to hydrothermal alteration while high temperature mantle materials being underplated. Another explanation is that horizontal sequences of basalt each with flip-flop magnetization polarity cancel out to the resultant magnetic field on the surface. We are currently developing a synthetic database system containing datasets of seismicity, potential field data, crustal and thermal structures, and other geophysical data to facilitate the study of past, contemporary and future changes in the deep sea environment around Japan; i.e. trench, trough, subduction zones, marginal basins and island arcs. Several special characteristics are an object-oriented approach to the collection and multi-faceted studies of global data from a variety of sources.     

高精度新方法测量计算船舶磁场分布

将高精度质子磁探仪和位场变换理论用于测量计算船舶磁场，以研究其在海洋中的分布。由质子磁探仪实测海面上１０ｍ处磁场的模（船的磁场与地磁场矢量的和的绝对值），用位场变换理论计算出船的磁场三个分量在水面和水下的分布；并采用一系列有效措施，提高计算速度和结果的精度。将该方法和磁球理论严格解比较，在ｚ＝０面上误差小于０．１％，在ｚ＝－２０ｍ面上误差小于１％；还给出船的磁场强度在船的纵横向的分布曲线和平面立体     

三峡及邻区晚第三纪以来构造应力场特征探讨

用三峡及邻区（东经１０８°～１１３°，北纬２９°～３３°）地质资料，地震资料，现 场地应力测量资料论证三峡及邻区晚第三纪以来构造应力场稳定性及其分区特 征。     

Simulation of wave power devices

Classical frequency and time domain models of a single degree of freedom wave power device are presented. In the time domain, a convolution integral is conventionally used to represent the fluid dynamic radiation force, characterised by added mass and damping in the frequency domain. This integral is replaced by an approximate ordinary differential equation (ODE) model which is faster and more convenient in simulations. A time domain model of the fluid dynamics of an oscillating water column (OWC) device is derived to illustrate the technique. Digital simulations of the OWC are used to compare the accuracy of the classical and ODE models. The simulation of the ODE model runs about six times as fast as the classical model based on convolution, yet characterises the fluid dynamics accurately.     

Virgin rock temperatures from well logs — accuracy analysis for some advanced inversion models

Temperature data from 18 measurement series obtained during logging of the Oseberg field in the northern North Sea are presented. Because the measurement series are taken at approximately the same depth, they should give identical temperatures after depth correction, and are suitable for assessing the performance of different models used to determine virgin rock temperatures from well log information.We have used this data set to test the properties of the different models given by Shen and Beck (1986). Although these models were built to simulate closely the thermal recovery of a well and are unbiased, the uncertainties in the temperature estimates when applied to real data are found to be no less than those from simpler (biased) models. This fact confirms the conclusion of Hermanrud (1989a) who showed that physical factors other than those presently accounted for significantly influence the thermal recovery of a borehole.     

Design of ship's bow form by potential-based panel method

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Measurements of higher harmonic wave forces on a vertical truncated circular cylinder

Wave forces on a vertical truncated circular cylinder in Stokes waves with the wave slopes ranging from 0.06 to 0.24, are measured in a wave tank. The higher harmonic wave forces are compared with the available values from theories of the FNV (Faltisen–Newman–Vinje) model and Varyani solution. The first harmonic horizontal forces measured are much larger than the theoretical values from the FNV model, while the first harmonic vertical forces are well predicted by the Varyani theory. It was also found that the FNV model significantly overpredicts the second harmonic horizontal forces in high frequency waves, but under predicts the third harmonic forces. The differences between the actual measurement and the theory, in the second and third harmonic horizontal forces, become smaller at low wave frequencies as the wave slope increases. In addition, the transverse instabilities in the incoming waves with high wave slope were observed, which is due to the nonlinear modulation. Measurements were, thus, carried out before the instability occurred.     

有风浪太湖水体的光照传输模式

根据辐射传输方程的近似解方法和光照传输的累加原理,建立了包括水面风浪效应、水中悬浮粒多次散射和底泥反射的垂直分层水体的光照传输数值模式。利用该模式和太湖悬浮粒实测资料,计算和讨论了太湖水体中光照随水深的变化以及悬浮粒浓度、风浪和太阳高度的影响。结果表明,悬浮粒的多次散射所形成的漫射光是湖水中光照不可忽视的重要部分。在水体的下层,漫射光甚至是光照的主要构成部分。风浪对水中光照的影响则主要在天顶角大于70°时才明显地表现出来,此时风浪水体对太阳直接辐射和全辐射的反射率比平静水面都有明显的减小。