河南豫北地震台网地区波速的探讨

为了解决河南豫北地区地震的定位问题 ,对豫北台网内的 10个典型地震 ,使用了 7个地震台站的资料 ,用波速比求出横波速度 ;用和达定位法 (有的同时使用高桥法 )进行了精确定位 ,求出震源深度 ;测量了震中至各台的震中距 ,以此反算出了纵波速度。通过计算 ,确定出了较为适合河南豫北地震台网地区的波速。     

Field vibration mitigation by honeycomb WIB for pile foundations of a high-speed train viaduct

Environmental vibrations from recent high-speed trains are becoming a special concern in the civil and environmental engineering field since they can give detrimental effects to residents, sensitive equipments and high-tech production facilities in the vicinity of train tacks. Herein, aiming at the vibration mitigation for a specific high-tech industrial area, the low-frequency vibrations from a train viaduct are targeted over an anticipated range. A theoretically designed innovative countermeasure, called honeycomb wave impeding barrier (WIB) for a wave impeding barrier, is introduced and its effects are investigated by computer simulation. The present WIB is based on the wave dispersion phenomenon that can modulate the incoming wavelengths into the shorter wavelengths, creating an apparent wave cut-off characteristic in the wave field across WIB installation area. The shorter wavelengths are further impeded due to the impedance ratio of the WIB walls and in-fill materials and absorbed by the in-fills more. The three-dimensional FEM simulation demonstrates a dramatic reduction effect that is difficult to achieve by conventional measures.     

鄂尔多斯深盆气与铀矿化关系初探

深盆气是非常规的天然气藏。鄂尔多斯深盆气与铀矿化有密切关系，上古生界气源层铀含量丰富、易浸出，故也为铀源层。在铀源层成岩时所形成的压榨水(即深层水)，经燕山期热事件快速增温增压，使铀的溶解度大大增加。此时也正是盆地生气高峰期，气压远远大于水压，气体推动深层水沿断裂向上扩散。在上覆透水层，由于地表水的参与形成复杂的气水地球化学垒，使铀沉积成矿。本文还总结了该类型铀矿的找矿准则。     

The reflection of plane waves in a poroelastic half-space saturated with inviscid fluid

This paper discusses surface displacements, surface strain, rocking, and energy partitioning during reflection-of-plane waves in a fluid-saturated poroelastic half-space. The medium is modeled by Biot's theory, and is assumed to be saturated with inviscid fluid. A linear porosity-modulus relation based on experimental data on sandstones is used to determine the material parameters for Biot's model. Numerical results in terms of angle of incident waves and Poisson's ratio are illustrated for various porosities and degrees of solid frame stiffness. The results show that the amount of solid frame stiffness controls the response of a fluid-saturated porous system. A poroelastic medium with essentially dry-frame stiffness behaves like an elastic medium, and the influence of pore fluid increases as dry-frame stiffness is reduced. The effects of a second P-wave become noticeable in poroelastic media with low dry-frame stiffness.     

Scattering of plane SV waves by cylindrical canyons in saturated porous medium

On the basis of Biot dynamic theory, an analytic solution of two-dimensional scattering and diffraction of plane SV waves by circular cylindrical canyons in a half space of saturated porous media is presented in this paper for the first time. The solution is obtained by employing the Fourier–Bessel series expansion technique. Parametric studies had been carried out, which includes: the angle of incidence, the frequency of the incident SV wave, the porosity of saturated porous medium and the stiffness and Poisson's ratio of the solid-skeleton. All the outcomes are useful for the seismic analysis of the surface topography conditions.     

海南博螯沿岸地貌与人类活动的潜在影响

The Boao coastal system along the eastern coast of Hainan Island is a dynamic delta-tidal inlet-barrier formed during the late Holocene. The delta developed inside a shallow lagoon barred by a sandy barrier with a narrow, shallow tidal inlet opening. Two major distributary channels separated by small islands characterize the delta. The lagoon is silting up receiving and trapping sediments from both the river and, in minor measure during storms, through the tidal inlet opening and barrier washovers. The barrier at the tidal inlet is highly dynamic and changes its form, accreting (migrating spit) against the inlet during fair-weather conditions and being eroded during storms and river floods.The delta has almost completely filled the lagoon and major concerns exist on the effect that ongoing large development plans may have on the environment. These concerns include the effect on floods and rate of siltation once banks of the islands have been stabilized and floodwater and sediment load are impeded from spreading over the lowlands, and the effect of increasing pollutant loads from the new facilities on the ecosystems of the increasingly restricting lagoon water and on the seashores.     

On size and boundary effects in scaled model blasts spatial problems

This paper addresses size and boundary effects on wave propagation, fracture pattern development and fragmentation in small scale laboratory-size specimens for model blasting. Small block type specimens are centre-line loaded by linear explosive charges and supersonically detonated. Using elastic wave propagation theory and fracture mechanics it is shown that the type of boundary conditions which prevail at the outer boundary of the cylinder control the extension of bore-hole cracking and fragmentation within the body of the cylinder. In the case of a composite block where a cylindrical core of different material is embedded, the level of fracturing and fragmentation is controlled by the separation of the interface which in turn depends on the relative dimensions of the core and the block. The most important parameter is the ratio between the length of the pulse (space-wise or time-wise) and the characteristic dimensions of the models, i.e. in this case the dimensions of the core and the mantel. Stress wave superposition effects occur in the corner sections of the mantel. Theoretical results are in good agreement with recent experimental findings.     

Stress‐dependent elastic wave velocity of microfractured sandstone

A model for the stress‐dependent elastic wave velocity response of fractured rock mass is proposed based on experimental evidence of stress‐dependent fracture normal and shear stiffness. Previously proposed models and previous experimental studies on stress‐dependent fracture stiffness have been reviewed to provide a basis for the new model. Most of the existing stress‐dependent elastic wave velocity models are empirical, with model parameters that do not have clear physical meanings. To propose the new model, the rock mass is assumed to have randomly oriented microscopic fractures. In addition, the characteristic length of microfractures is assumed to be sufficiently short compared to the rock mass dimensions. The macroscopic stress‐dependent elastic wave velocity response is assumed to be attributed to the stress dependency of fracture stiffness. The stress‐dependent fracture normal stiffness is defined as a generalized power law function of effective normal stress, which is a modification of the Goodman's model. On the other hand, the stress dependency of fracture shear stiffness is modeled as a linear function of normal stress based on experimental data. Ultrasonic wave velocity responses of a dry core sample of Berea sandstone were tested at effective stresses ranging from 2 to 55 MPa. Visual observation of thin sections obtained from the Berea sandstone confirms that the assumptions made for microstructure of rock mass model are appropriate. It is shown that the model can describe the stress‐dependent ultrasonic wave velocity responses of dry Berea sandstone with a set of reasonable material parameter values. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.     

Modeling nonlinear wave–wave interactions with the elliptic mild slope equation

An approach is developed to simulate wave–wave interactions using nonlinear elliptic mild-slope equation in domains where wave reflection, refraction, diffraction and breaking effects must also be considered. This involves the construction of an efficient solution procedure including effective boundary treatment, modification of the nonlinear equation to resolve convergence issues, and validation of the overall approach. For solving the second-order boundary-value problem, the Alternating Direction Implicit (ADI) scheme is employed, and the use of approximate boundary conditions is supplemented, for improved accuracy, with internal wave generation method and dissipative sponge layers. The performance of the nonlinear model is investigated for a range of practical wave conditions involving reflection, diffraction and shoaling in the presence of nonlinear wave–wave interactions. In addition, the transformation of a wave spectrum due to nonlinear shoaling and breaking, and nonlinear resonance inside a rectangular harbor are simulated. Numerical calculations are compared with the results from other relevant nonlinear models and experimental data available in literature. Results show that the approach developed here performs reasonably well, and has thus improved the applicability of this class of wave transformation models.     

Analysis of wave groups by wave envelope-phase and the Hilbert Huang transform methods

The wave groups are studied by both conventional wave analysis methods and by the non-stationary Hilbert Huang Transform (HHT) method. Full-scale wave records containing abnormal waves are used. Instantaneous quantities, such as envelope, phase and frequency, are adopted to study the wave grouping. A refined definition of wave group is proposed considering that the wave process is simultaneously amplitude and frequency modulated. The validation of the proposed definition is conducted by analysis of numerical simulation data. Group parameters are proposed based on the time-frequency distribution of energy. An attempt is made to find the relationship between the characteristics of abnormal waves and the group characteristics.