Parameter analysis for gate metal—oxide—semiconductor structures of ion-implanted 4H silicon carbide metal—semiconductor field-effect transistors

From the theoretical analysis of the thermionic emission model of current--voltage characteristics, this paper extracts the parameters for the gate Schottky contact of two ion-implanted 4H-SiC metal--semiconductor field-effect transistors (sample A and sample B for three and four times multiple ion-implantation channel region respectively) fabricated in the experiment, including the ideality factor, the series resistance, the zero-field barrier height, the interface oxide capacitance, the interface state density distribution, the neutral level of interface states and the fixed space charge density. The methods to improve the interface of the ion-implanted Schottky contact are given at last.     

Tsunami-like solitary waves impinging and overtopping an impermeable seawall: Experiment and RANS modeling

This study investigates tsunami-like solitary waves impinging and overtopping an impermeable trapezoidal seawall on a 1:20 sloping beach. New laboratory experiments are performed for describing three typical cases: a turbulent bore rushes inland and subsequently impacts and overtops the seawall (Type 1); a wave directly collapses on the seawall and then generates overtopping flow (Type 2); and, a wave straightforwardly overtops the seawall crown and collapses behind the seawall (Type 3). A two-dimensional volume of fluid (VOF) type model called the COBRAS (COrnell BReaking And Structure) model, which is based on the Reynolds-Averaged Navier–Stokes (RANS) equations and the k–ε turbulence closure solver, is validated by experimental data and then applied to investigate wave dynamics for which laboratory data are unavailable. Additionally, a set of numerical experiments is conducted to examine the dynamic wave acting force due to waves impacting the seawall. Effects of wave nonlinearity and freeboard are elucidated. Special attention is given to a distinct vortex evolutionary behavior behind the seawall, in which the dynamic properties of entrapped air-bubbles are briefly addressed experimentally and numerically.     

The form of the asymptotic depth-limited wind-wave spectrum: Part III — Directional spreading

The directional spreading of both the wavenumber and frequency spectra of finite-depth wind generated waves at the asymptotic depth limit are examined. The analysis uses the Wavelet Directional Method, removing the need to assume a form for the dispersion relationship. The paper shows that both the wavenumber and frequency forms are narrowest at the spectral peak and broaden at wavenumbers (frequencies) both above and below the peak. The directional spreading of the wavenumber spectrum is bi-modal above the spectral peak. In contrast, the frequency spectrum is uni-modal. This difference is shown to be the result of energy in the wind direction being displaced from the linear dispersion shell. A full parametric relationship for the directional spreading of the wavenumber spectrum is developed. The analysis clearly shows that typical dispersion relationships are questionable at high frequencies and that such effects can be significant. This result supports greater attention being focussed on the routine recording of wavenumber spectra, rather than frequency spectra.     

Some statistical characteristics of large deepwater waves around the Korean Peninsula

The relationship between significant wave height and period, the variability of significant wave period, the spectral peak enhancement factor, and the directional spreading parameter of large deepwater waves around the Korean Peninsula have been investigated using various sources of wave measurement and hindcasting data. For very large waves comparable to design waves, it is recommended to use the average value of the empirical formulas proposed by Shore Protection Manual in 1977 and by Goda in 2003 for the relationship between significant wave height and period. The standard deviation of significant wave periods non-dimensionalized with respect to the mean value for a certain significant wave height varies between 0.04 and 0.21 with a typical value of 0.1 depending upon different regions and different ranges of significant wave heights. The probability density function of the peak enhancement factor is expressed as a lognormal distribution, with its mean value of 2.14, which is somewhat smaller than the value in the North Sea. For relatively large waves, the probability density function of the directional spreading parameter at peak frequency is also expressed as a lognormal distribution.     

Breaking wave loads at vertical seawalls and breakwaters

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.     

Scaling wave impact pressures on vertical walls

It is widely recognized that the use of Froude similarity for scaling up wave impact pressures recorded during physical model tests may lead to over-estimation of impact maxima. Based on reviewing historical work dating back to the 30s and further developments in the 60s and 80s, a general method is presented that is suitable for scaling up impact pressures and rise times measured during small scale physical model tests. The method accounts for the effect of air leakage and is applicable to most wave impact loads. The model is applied to scale wave impact pressures on vertical walls and similar structures, and consistent correction factors for the Froude scaling law are derived.     

Modelling the effect of wave overtopping on nearshore hydrodynamics and morphodynamics around shore-parallel breakwaters

Wave overtopping nearshore coastal structures, such as shore-parallel breakwaters, can significantly alter the current circulation and sediment transport patterns around the structures, which in turn affects the formation of tombolos and salients in the nearshore area. This paper describes the implementation of a wave overtopping module into an existing depth-averaged coastal morphological mode: COAST2D and model applications to investigate the effect of wave overtopping on the hydrodynamics and morphodynamics around a group of shore-parallel breakwaters. The hydrodynamic aspects of the model were validated against a series of laboratory conditions. The model was then applied to a study site at Sea Palling, Norfolk, UK, where 9 shore-parallel segmented breakwaters including 4 surface-piercing and 5 low-crested breakwaters are present, for the storm conditions in Nov 2006. The model results were compared with laboratory data and field measurements, showing a good agreement on both hydrodynamics and morphological changes. Further analysis of wave overtopping effect on the nearshore hydrodynamics and morphodynamics reveals that wave overtopping has significant impacts on the nearshore circulation, sediment transport and the resulting morphological changes within such a complex breakwater scheme under the storm and macro-tide conditions. The results indicate the importance of including the wave overtopping in modelling nearshore morphodynamics with the presence of coastal structures.     

水力插板在海港工程中的应用

水力插板技术具有安全稳定性高、施工速度快等优点,经过长期的现场试验逐步形成了水力插板与抛石防护相结合这样一种工程建设模式,将此项技术应用到海港工程中具有其特殊优势,值得推广应用。     

白浪覆盖率模式中参量的研究

在波面位移为正态过程的假定下,推导出一种以平均周期和风速为参量的白浪覆盖率公式W=1-Φ[5.11094[-T/U10]0.7576].依据摩擦风速和U10的表达式,进一步推导出白浪覆盖率依赖于摩擦风速的形式W=1-Φ[0.5227[-T/U]0.7576]].考虑到在实际应用中,经常需要用波龄描述波浪的状态,将白浪覆盖率表示成一种形式简单的波龄的函数W=1-Φ(3.6496ξ0.7576),与Monahan等的海上测量数据符合良好.     

Interaction of flexural gravity waves with shear current in shallow water

In the present study, the effect of shear current on the propagation of flexural gravity waves is analyzed under the assumptions of linearized shallow-water theory. Explicit expressions for the reflection and transmission coefficients associated with flexural gravity wave scattering by a step discontinuity in both water depth and current speed are derived. Further, trapping and scattering of flexural gravity waves by a jet-like shear current with a top-hat profile are examined and certain limiting conditions for the waves to exist are derived. The effects of change in water depth, current speed, incident wavelength and the angle of incidence on the group and phase velocities as well as on the reflection and transmission characteristics are analyzed through different numerical results.