Probabilistic approach for active control of structures: experimental verification

In our previous study (Earthquake Engineering and Structural Dynamics 2003; 32 :2301), we have developed a probabilistic algorithm for active control of structures. In the probabilistic control algorithm, the control force is determined by the probability that the structural energy exceeds a specified target critical energy, and the direction of a control force is determined by the Lyapunov controller design method. In this paper, an experimental verification of the proposed probabilistic control algorithm is presented. A three‐story test structure equipped with an active mass driver (AMD) has been used. The effectiveness of the control algorithm has been examined by exciting the test structure using a sinusoidal signal, a scaled El Centro earthquake and a broadband Gaussian white noise; and, especially, experiments on control have been performed under different conditions to that of system identification in order to prove the stability and robustness of the proposed control algorithm. The experimental results indicate that the probabilistic control algorithm can achieve a significant response reduction under various types of ground excitations even when the modeling error exists. Copyright © 2004 John Wiley & Sons, Ltd.     

Real-time simulation of ground displacement by digital accelerograph record

Introduction The observation records of strong ground motion previously, on the one hand, supplied basicdata both to research on earthquake engineering and to constitute the criterion of aseismatic de-signing of all project structures; on the other hand, it provided important information for the re-search on the process of epicenter burst in seismology. With the development of research on strongground motion observation, especially the development of the new generation accelerograph,which…     

Spatial damage distribution of August 16,2003,Inner Mongolia,China,M_S=5.9 earth-quake and analysis

Introduction The ground motion is generally estimated by attenuation relation in seismic hazard assesment.The attenuation relation is usually the function of earthquake magnitude and distance.Actually the focal mechanism and other source parameters may also have significant impacts on the ground motion,especially in the near-source region.Recent post-earthquake investigations show that the damages have close relation with the closest fault-plane distance.On August16,2003,a MS=5.9earthquake o…     

On the applicability of KirchofPs law and the principle of heat balance in thermal infrared remote sensing:A non-isothermal system

This paper proposes a basic equation of thermal radiation interaction between surface objects on the basis of the principle of heat balance in the interface. The solution of this equation takes account of the contribution of sensible heat flux and latent heat flux more completely, compared with traditional solution for surface cooling and heating processes. By the aid of the experimental data conducted in the Xiaotangshan experimental site, Beijing, both the non-applicability of Kirchoff's law and the measurability of surface emissivity in a non-isothermal system have been highlighted. Two methods called ventilation and time-delay compensations have been proposed to reduce the error induced by change of surface temperatures of non-isothermal objects during the measurement of emissivity. Based on the solution of the basic equation, this paper has analyzed and pointed out the misunderstanding in comprehension and application of Kirchoff's law published in literature.     

Aquatic fungi growing on dead fragments of submerged plants

The authors investigated the dead fragments of 22 species of submerged plants in the water from three limnological and trophical different water bodies (spring, river and pond). A total of 184 species of aquatic fungi, including 119 zoosporic and 65 conidial species were found on the fragments investigated plants. The most common fungus species were Aphanomyces laevis, Saprolegnia litoralis, Pythium rostratum (zoosporic fungi) and Acrodictys elaeidicola, Anguillospora longissima, Angulospora aquatica, Lemonniera aquatica, Mirandina corticola, Tetracladium marchalianum, Tetracladium maxiliformis, Trinacrium subtile (conidial fungi).

Most fungus species were observed on the specimens of Elodea canadensis (33 fungus species), Hippuris vulgaris f. submersa (33), Myriophyllum spicatum (34) and Potamogeton crispus (33), fewest on Ceratophyllum demersum (24), Fontinalis dalicarlica and Potamogeton nitens (each 25).

The most fungi were growing in the water from River Supraśl (107), the fewest in the water from Pond Dojlidy (99). Some aquatic fungus species were observed in the water of only one of the three water bodies – in Pond Dojlidy (30), in Spring Jaroszówka (32) and in the River Supraśl (39) species. Seventy-five species growing only on fragments of single submerged plants. A number of zoosporic and conidial species (22 and four, respectively) appeared new to Polish waters. Out of these 119 zoosporic species, some are known as parasites or necrotrophs of fish.     

Dike intrusion associated with the 2000 eruption of Miyakejima Volcano, Japan

The model for the 2000 dike intrusion event between Kozushima and Miyakejima volcano, Japan, was reinvestigated. After the sudden earthquake swarm in Miyakejima volcano, a dike intrusion of large volume was detected by the nationwide GPS network (Geonet). The displacements detected with GPS stations over an area with a radius of about 200 km shows a distribution that is consistent with the dike source being located near Miyakejima volcano.The dike was intruded northwestwards between Miyakejima and the neighboring Kozushima volcano. We searched for the parameters in the models that reproduce the regional displacements due to dike intrusion between Miyakejima and Kozushiima islands. We tested three models, (1) the model with a single dike, (2) the model with a dike and a point dislocation source which represents a creep dislocation source and (3) the model with a dike and a deflation source which represents a magma reservoir. Though all three models can match the horizontal displacements near the source area, model 1 fails to reproduce the regional displacements in the central part of Japan. Both models 2 and 3 can reproduce the regional displacement for horizontal components. Model 3 produces slightly better results than model 2 for vertical components. The balance in the volume budget for models 2 and 3 is also consistent with the observations. These results show that we cannot distinguish between the two models using only GPS observation. As there is no direct evidence for such a large creep or ductile source (corresponds to M7 or more) as proposed in model 2 and the active seismic region migrated back and forth within the linear swarm region, the model with a dike and a deep magma source is preferable. For the deflation point source, we obtained a deflation volume of 1.5 km³ at the depth of 20 km below the dike. An additional ~0.95 km³ of volume loss through caldera collapse and edifice deflation took place at Miyakejima. We conclude that the magma that intruded the dike came in part from below Miyakejima and in part from below the sea floor between Miyakejima and Kozushima, perhaps from reservoirs at the Moho.Editorial responsibility: S Nakada, T Druitt     

Geostatistical simulation of random fields with bivariate isofactorial distributions by adding mosaic models

This work deals with the geostatistical simulation of a family of stationary random field models with bivariate isofactorial distributions. Such models are defined as the sum of independent random fields with mosaic-type bivariate distributions and infinitely divisible univariate distributions. For practical applications, dead leaf tessellations are used since they provide a wide range of models and allow conditioning the realizations to a set of data via an iterative procedure (simulated annealing). The model parameters can be determined by comparing the data variogram and madogram, and enable to control the spatial connectivity of the extreme values in the realizations. An illustration to a forest dataset is presented, for which a negative binomial model is used to characterize the distribution of coniferous trees over a wooded area.     

Kinetic energy–rainfall intensity relationship for Central Cebu, Philippines for soil erosion studies

In the study of soil erosion, specifically on detachment of soil particles by raindrop impact, kinetic energy is a commonly suggested indicator of the raindrop's ability to detach soil particles from the soil mass. Since direct measurement of kinetic energy requires sophisticated and costly instruments, the alternative approach is to estimate it from rainfall intensity. The present study aims at establishing a relationship between rainfall intensity and kinetic energy for rainfalls in Central Cebu, Philippines as a preface of a wider regional investigation.

Drop size distributions of rainfalls were measured using the disdrometer RD-80. There are two forms of kinetic energy considered here. One is kinetic energy per unit area per unit time (KE_R, J m⁻² h⁻¹) and the other is kinetic energy per unit area per unit depth (KE, J m⁻² mm⁻¹). Relationships between kinetic energy per unit area per unit time (KE_R) and rainfall intensity (I) were obtained using linear and power relations. The exponential model and the logarithmic model were fitted to the KE–I data to obtain corresponding relationships between kinetic energy per unit area per unit depth of rainfall (KE) and rainfall intensity (I). The equation obtained from the exponential model produced smaller standard error of estimates than the logarithmic model.     

Origin of the high variability of water mineral content in the bedrock aquifers of Southern Madagascar

This study assesses the causes of the high spatial variability of the mineral content of groundwater in crystalline bedrock of Southern Madagascar. Although many kilometres from the coast and at a mean altitude of 400 m a.s.l, wells drilled in this area produce water with electrical conductivities in the range of 300–30,000 μS cm⁻¹ with a high spatial variability. Chemical and isotopic data are used to identify the processes involved in the groundwater mineralization. It is shown that the chemical composition of the groundwater in this region has its origin in (i) normal silicate and carbonate weathering reactions and (ii) input of marine salts, probably via rainfall recharge, modified by evapo-concentrative processes probably including precipitation and re-dissolution of secondary evaporites in the unsaturated zone. To obtain a better understanding of the spatial salinity distribution, well parameters such as yields, weathered zone thickness, weathered materials and morphological positions (upper slope, mid-slope, lower slope or valley bottom) are scrutinized.

A correlation was found between high salinity and low flow, shallow groundwater environments (flat hill tops, valley bottoms, weakly developed and clayey weathered zones) and between low salinity and high flow environments (granular, well-developed weathered zones and situation on valley slopes).     

Knowledge Representation Methods in Expert System for Earthquake Prediction ESEP 3.0

INTRODUCTIONKnowledgerepresentationandknowledgeacquisitionarekeyissuesinbuildinganexpertsystem .Theyarecloselyrelatedtothedomainproblem solvinglevelandcompetenceoftheexpertsystem .Intheknowledgeacquisitionprocess,thedomainexpertwillfirstofferandorganizepr…