地震层析成像在水利水电工程地质勘察中的应用

水利水电工程地质勘察是水利水电工程建设中的基础工作。地震层析成像技术作为一种新的物探方法，通过工程中孔，碉间地质条件的探测，进而评价大坝建筑物的工程地质条件是一种有效的手段。本文介绍了乌江构皮滩水利枢纽的应用效果。     

湾一井水位年动态变化研究

详细讨论了富裕湾一井的年动态变化趋势。结果表明湾一井各阶段的年动态变化可拟合为一线性方程，不同阶段水位上升速度改变可能与井头分流作用有关，中强地震前的漏斗形异常和人为因素引起的水位变化可通过水位恢复时上升速率不同而加以识别。     

山东荣成沽河流域水资源系统分析

流域水资源系统由降水产流，以及通过水文下垫面的转换，形成的地表径流和地下水流流组成。本文将复杂的沽河流域水 资源系统分解成多个子系统，利用频谱分析方法对各个水资源子系统的转换功能进行定量的分析刻画，并利用地下含水介质子系统的转换特征函数－频率响应函数求取水文地质参数，丰富了水文地质参数的获取途径。     

Water quality impacts from mining in the Black Hills,South Dakota,USA

The focus of this research was to determine if abandoned mines constitute a major environmental hazard in the Black Hills. Many abandoned gold mines in the Black Hills contribute acid and heavy metals to streams. In some areas of sulfide mineralization local impacts are severe, but in most areas the impacts are small because most ore deposits consist of small quartz veins with few sulfides. Pegmatite mines appear to have negligible effects on water due to the insoluble nature of pegmatite minerals. Uranium mines in the southern Black Hills contribute some radioactivity to surface water, but the impact is limited because of the dry climate and lack of runoff in that area.     

Porewater pressure increases in soil and rock from underground chemical and nuclear explosions

A review and analysis of chemical and nuclear explosive-induced porewater pressure increases and induced rise in groundwater table elevations (groundwater mounding) is presented. Our analysis indicates that residual pore pressure increases and groundwater mounding can be induced by underground chemical and nuclear explosions to scaled distances of 879 m/(kt)^1/3. This relationship is linear over seven orders of magnitude of explosive energy ranging from a 0.01 kg chemical explosion to a 100 kt nuclear explosion and is valid for a wide variety of saturated geological profiles. Underground chemical explosions, and probably underground nuclear explosions have the potential to induce liquefaction of water-saturated soils to scaled distances of about 260 m/(kt)^1/3.     

钛（Ⅳ）的反相萃取柱色层新体系研究及应用

本文研究了以ｃＨＣｌ＝８ｍｏｌ·Ｌ－１盐酸为移动相，以聚四氟乙烯负载的钽试剂－ＣＨＣｌ３为固定相反相萃取层析钛（Ⅳ）的新体系，柱上层析的钛用ｃＨＣｌ＝３ｍｏｌ·Ｌ－１盐酸洗脱后经二安替比林甲烷光度法测定，不仅钛回收率可达１００％，并可使钛（Ⅳ）与多种离子分离。能用于矿物岩石类复杂样品及其他物质中钛的分离富集与测定，方法简便快速。     

Geohydrological models and earthquake effects at Yucca Mountain, Nevada

 Yucca Mountain, the proposed site for the high-level nuclear waste repository, is located just south of where the present water table begins a sharp rise in elevation. This large hydraulic gradient is a regional feature that extends for over 100 km. Yucca Mountain and its vicinity are underlain by faulted and fractured tuffs with hydraulic conductivities controlled by flow through the fractures. Close to and parallel with the region of large hydraulic gradient, and surrounding the core of the Timber Mountain Caldera, there is a 10- to 20-km-wide zone containing few faults and thus, most likely, few open fractures. Consequently, this zone should have a relatively low hydraulic conductivity, and this inference is supported by the available conductivity measurements in wells near the large hydraulic gradient. Also, slug injection tests indicate significantly higher pressures for fracture opening in wells located near the large hydraulic gradient compared to the opening pressures in wells further to the south, hence implying that lower extensional stresses prevail to the north with consequently fewer open fractures there. Analytical and numerical modeling shows that such a boundary between media of high and low conductivity can produce the observed, large hydraulic gradient, with the high conductivity medium having a lower elevation than the water table. Further, as fractures can close due to tectonic activity, the conductivity of the Yucca Mountain tuffs can be reduced to a value near that for the hydraulic barrier due to strain release by a moderate earthquake. Under these conditions, simulations show that the elevation of the steady-state water table could rise between 150 and 250 m at the repository site. This elevation rise is due to the projected shift in the location of the large hydraulic gradient to the south in response to a moderate earthquake, near magnitude 6, along one of the major normal faults adjacent to Yucca Mountain. As the proposed repository would only be 200–400 m above the present water table, this predicted rise in the water table indicates a potential hazard involving water intrusion. Received: 7 June 1996 / Accepted: 19 November 1996     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Qualitätsanforderungen an Oberflächengewässer: Zielvorgaben,Qualitätsziele und chemische Gewässergüteklassifizierung

Quality Requirements for Fresh Waters: Water Quality Targets, Water Quality Objectives, and Chemical Water Quality Classification In the Federal Republic of Germany, water quality requirements for the protection of inland surface waters against hazardous substances are formulated on the basis of a quality targets derivation concept developed jointly by the Federal Government and the Federal States. The quality requirements were termed “water quality targets” in order to make it clear that the values derived are orientational values rather than legally binding limit values. The international comparison of quality requirements for surface waters shows that, on the whole, the national quality targets ensure a high level of protection. According to present scientific knowledge, impairments of uses, such as supply of drinking water, or risks to aquatic communities need not to be expected if the quality targets are complied with. A comparison of water quality data with the water quality targets makes it possible, on the one hand, to identify those substances whose inputs must be further reduced; on the other hand, it also shows that, for a number of substances, there is no need at present for concern over their adversely water quality. A further differentiation of the aquatic hazard potential of pollutants allows a water quality classification system to be developed on the basis of the quality targets derivation concept. The basic elements of this water quality classification system are presented, and its application is explained by way of examples.     

Gaschromatographische Bestimmung von polychlorierten Biphenylen in Wasser nach Headspace-Festphasenmikroextraktion

Gas-chromatographic Determination of Polychlorinated Biphenyls in Water after Headspace Solid-phase Microextraction Headspace-analytical techniques are usually applied to the determination of easily volatile substances in water, whereas semivolatiles are generally isolated by liquid-liquid or solid-phase extraction. In the present paper, a method is presented for isolating high boiling polychlorinated biphenyls (PCB) using headspace solid-phase microextraction at elevated temperature. In spite of their low vapor pressure, the analytes are adsorbed very efficiently on a poly-dimethylsiloxane-coated fiber. Thus, in combination with GC/ECD, a very simple and sensitive solventless determination of PCB is accomplished. Using the simplest possible standard conditions, limits of determination in the lowest nanogram-per-liter range are achieved. Further increased sensitivity down to the ppq (parts per quadrillion) range is possible by stirring and increasing the sample volume and adsorption time. Moderate matrix effects have been observed in some surface and groundwaters.