磁流变阻尼器的半主动控制及实时混合模拟试验研究

磁流变阻尼器作为一种比较典型的半主动控制元件,具有构造简单、响应速度快、耐久性好、阻尼力大且连续可调等优点。即使地震中能源中断,磁流变阻尼器仍可以作为被动耗能装置继续工作发挥作用,可靠性高。设计合理有效的磁流变阻尼器半主动控制方法,对于整体结构的减震效果尤其重要。提出一种改进的磁流变阻尼器的半主动控制策略-改进的Bang-Bang控制策略,对装有磁流变阻尼器的减震控制3层框架结构进行了一系列的实时混合模拟试验,对多种半主动控制方法下的振动控制效果进行试验分析。试验结果表明:磁流变阻尼器对框架结构的减震效果显著,并验证了提出的磁流变阻尼器半主动控制策略的有效性。     

中国和欧盟阻尼器检测标准比较

国内阻尼器工程应用越来越多,阻尼器生产和应用时需要进行型式检验和出厂检验。中国和欧盟均制定了阻尼器产品检验标准,但在检测参数、检测方法和数据处理等方面存在一些差异,有些参数的检测还存在一些困难和争议,通过比较研究,指出中欧阻尼器检测标准的异同点,并分析各自的特点。以应用量较大的位移型软钢阻尼器和速度型黏滞流体阻尼器为例,比较中国和欧盟检测标准的异同点,内容包括检测方法、检测设备和数据处理方法等,提出一些对现有检测标准的改进建议,供同行参考。     

A response spectrum approach for seismic performance evaluation of actively controlled structures

To evaluate and measure the effectiveness of active control schemes in reducing the response of structures subjected to earthquake excitations, it is common to use recorded or artificially generated earthquakes as input motions. This paper introduces the response spectrum analysis to evaluate linear control systems for seismic inputs defined by code‐prescribed or site‐specific ground response spectra. Using such a method one can evaluate a control system in a single analysis for the ensemble of time histories that are represented by the input response spectra. The response spectrum analysis can also facilitate the implementation of comprehensive parametric studies. A generalized response spectrum method is used to analyse systems with non‐symmetrical matrices that are caused by the general nature of the control actions imposed on the structure. The application of the method is demonstrated on several numerical examples of a building structure where the control force is applied through an active tuned‐mass damper. Copyright © 2000 John Wiley & Sons, Ltd.     

Design of dampers for structures based on optimal control theory

The aim of this paper was to propose a design guideline for using visco‐elastic dampers for the control of building structures subjected to earthquake loading as well as suspension roof structures subjected to wind loading. The active control algorithm was used to calculate the control forces. Based on the single‐mode approach the control forces were transformed to the forces which visco‐elastic dampers can provide. Application of the method to the design of the building structure with passive damping devices in the bracing system and to the suspension roof with dampers was studied. Through the application of optimal control theory a systematic design procedure to implement dampers in structures is proposed. Copyright © 2000 John Wiley & Sons, Ltd.     

装设粘弹性阻尼器钢筋混凝土结构抗震实用分析

为了设计装设粘弹性阻尼器受控结构、推进此项技术的工程应用,分别利用粘弹性阻尼器的复刚度模型和有限元模型,编制了振型分解反应谱程序和弹性时程分析程序,并对一装设粘弹性阻尼器的16层钢筋混凝土结构和相应原结构在多遇地震下的响应进行了分析。     

减震结构中的粘弹性阻尼器参数优化

研究了粘弹性阻尼器在结构减震控制中的参数优化问题。从性价比的角度提出r优化目标函数,建立了阻尼器的参数优化模型。以一单层框架为例,分别选用非线性规划中的复形法和通过调用MATLAB程序优化工具箱中Fmincon函数（简称Fmincon函数法）两种方法,编制丁相应的优化分析程序,对粘弹性阻尼器在单层框架结构减震控制中的参数优化进行丁分析。研究结果表明,两种优化算法都达到了预期的目标,实现了目标函数最小化。     

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.     

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.     

屋盖悬挑端加固减振试验研究

大跨网架屋盖挑檐部分风致响应较大,提出附加杆件、粘弹性阻尼器及粘滞阻尼器三种加固减振方法。设计制作正置四角锥体单元空间网架足尺子结构试验模型,基于带悬挑平屋盖风压分布风洞试验数据,对三种加固足尺子结构试验模型进行不同风向角下风荷载时程的加载。分析结构风致加速度与位移响应,结果表明:附加杆件加固后网架刚度增大,加速度响应增大,位移响应减小;附加粘弹性阻尼器,结构加速度与位移响应均降低;附加粘滞阻尼器,结构加速度响应减小,位移减小效果不明显。     

波纹钢管铅阻尼器耗能性能分析研究

提出一种波纹钢管铅阻尼器,介绍了其构造、工作机理、布置形式及特点,采用ABAQUS软件,建立钢管阻尼器、波纹钢管阻尼器和波纹钢管铅阻尼器有限元模型,对其应力分布,传力路径和滞回性能进行模拟分析。结果表明:波纹钢管铅阻尼器耗能减震机理明确,工作性能和耗能性能稳定,滞回曲线饱满以及耗能能力强,具有良好的变形和延性,极限变形大;波纹钢管铅阻尼器通过在波纹钢管内设置铅芯使初始刚度、承载能力和耗能能力得到大幅度提高,既有效保持了波纹钢管的变形能力,又避免波纹钢管发生局部屈曲,使波纹钢管耗能能力得到充分发挥。波纹钢管铅阻尼器在1mm小位移下就可以进入耗能,而且很快进入稳定耗能状态,等效阻尼比稳定在0.3~0.4之间。