Current-induced scour beneath initially elevated subsea pipelines

When a subsea pipeline is laid on an uneven seabed, certain sections may have an initial elevation with respect to the far-field seabed, e_o, and thus potentially affecting the on-bottom stability of the pipeline. This paper focuses on quantifying the effects of the upstream dimensionless seabed shear stress, θ_∞, and Reynolds number, Re, on: (1) the maximum dimensionless seabed shear stress beneath the pipe, θ_max, to be compared to the critical shear stress in order to determine whether scour would occur and progress towards an equilibrium state; and, (2) the dimensionless equilibrium scour depth beneath the pipe, S_eq/D. Using a 2-D Reynolds averaged Navier-Stokes (RANS) approach along with the k-ω Shear Stress Transport (SST) turbulence model, a parametric study involving 243 computational fluid dynamics (CFD) simulations was conducted. The simulation results were used to develop a closed-form equation for the prediction of θ_max. Subsequently, experimental measurements of S_eq/D have been compiled from published literature, to develop a new closed-form equation for the prediction of S_eq/D with a high correlation to the experimental data. In summary, we present two closed-form equations for the prediction of θ_max and S_eq/D for pipelines with an initial e_o/D, which are applicable for both clear-water and live-bed conditions. The effects of θ_∞ and Re have been included, albeit Re having a small influence as compared to the other parameters.     

Temporal variation of modulated-wave-train geometries and their influence on vertical bending moments of a container ship

A towing experiment was conducted using a modulated wave train to investigate the vertical bending responses of a hydro-structural container ship model. In the experiment, a spatially periodic modulated wave train, as a model of a freak wave in successive high waves mimicking the so-called three sisters, was generated by the recently established higher-order spectral method wave generation (HOSM-WG) method. HOSM-WG enables us to control the location and timing of the maximum crest height in a wave tank. With precise control of the towing carriage, an experiment was conducted in which the timing of the encounters between the ship model and the modulated wave train was accurately determined. The maximum sagging moment (SM) was found to increase in proportion with the encounter wave height. However, because of differences in the relative depth of the fore and aft troughs, the maximum SM is highly variable for a given wave height. The temporal wave-geometry evolution caused the relative trough-depth to vary significantly within a wave period in the vicinity of the maximum crest height. As a result, depending on the encounter timing, the SM varied considerably for a given wave height. The temporal variation of the wave geometry is a robust feature of a modulated wave train and is common between the spatially periodic and temporally periodic modulated wave trains.     

Wave-porous structure interaction modelling using Improved Meshless Local Petrov Galerkin method

This paper presents the application of the Improved Meshless Local Petrov Galerkin method with Rankine source (Sriram and Ma, 2012) Sriram and Ma (2012) for wave interaction with porous structure model. The mathematical model is based on a unified governing equation that incorporates both pure fluid and porous region. The porous flow model is based on the empirical resistance coefficients. The interface between the pure fluid and porous region is numerically treated using background nodes having the porosity information and interpolated over the particle using simplified finite difference interpolation method. The model is validated using the available experimental results for wave damping over the permeable bed. The developed model is used to analyse the different shape of the seawall such as flaring shaped seawall, recurve wall and vertical wall. Then the validated model is used for analysing the overtopping amount due to the effect of porous layer in-front of the different sea wall profile. Numerical expression for overtopping amount has been provided for the different configurations from the numerical model.     

Recreational use of offshore wind farms: Experiences and opinions of sea anglers in the UK

The expansion of offshore wind farms (OWFs) is likely to increase conflict with other marine users as different sectors compete for space. There may also be positive interactions, as the artificial reef effects from energy infrastructure have the potential to sustain and enhance fishing opportunities. Recreational sea angling is an important sector within the UK but the experiences and opinions of UK sea anglers with respect to OWFs have not been documented. To address this, an online survey was undertaken with recreational anglers around the UK (n=199). Respondents represented a range of socio-demographic and angling characteristics, although male, more frequent and older fishers as well as club members were over-represented compared to a 2012 national survey. One quarter of the respondents had fished around the perimeter of or within an OWF, most on multiple occasions, and 73% of those who had not expressed a willingness to do so in future. Anglers reported both positive and negative effects on catch success when fishing near or within OWFs compared to their experiences of the same site prior to OWF development. Outcomes for individual species were also mixed. Anglers recognised the potential artificial reef effects of OWFs and their role as a “safe haven”, particularly due to the exclusion of commercial fishers. Negative perceptions included restricted access, harm to marine wildlife, and visual impact. There is little evidence that OWFs will have a significant economic impact on recreational fishing, as most anglers are unlikely to change their behaviour in response to future developments.     

10MW级海上浮式风机运动特性研究

以DTU 10 MW基准风机为研究对象,单柱式平台作为基础支撑结构,使用FAST软件计算分析,考虑单独风、单独波浪以及风浪组合三种环境条件,对10 MW级海上浮式风机的运动特性进行研究。研究发现:系统摇荡是风激励的低频运动和波浪激励的波频运动的合成,气动阻尼削弱系统的波频运动;系统纵荡和纵摇运动存在明显的耦合现象,而垂荡运动和其他方向的运动没有耦合关系;受纵摇影响,转动的风轮产生陀螺惯性力矩,激励首摇运动;随着风机单机容量的增加,风激励的低频运动比例增大,波浪激励的波频运动比例减小。     

Oil dispersal modelling: reanalysis of the Rena oil spill using open-source modelling tools

ABSTRACT

Oil spill forecast modelling is typically used immediately after a spill to predict oil dispersal and promote mobilisation of more effective response operations. The aim of this work was to map oil dispersal after the grounding of the MV Rena on Astrolabe Reef and to verify the results against observations. Model predictions were broadly consistent with observed distribution of oil contamination. However, some hot spots of oil accumulation, likely due to surf-zone and rip current circulation, were not well represented. Additionally, the model was run with 81 differing wind conditions to show that the events occurring during the grounding represented the typical likely behaviour of an oil spill on Astrolabe Reef. Oil dispersal was highly dependent on prevailing wind patterns; more accurate prediction would require better observations of local wind patterns. However, comparison of predictions with observations indicated that the GNOME model was an effective low-cost approach.     

0917号台风“芭玛”折向东南向移动原因分析

利用NCEP全球数据同化系统(GDAS)1°×1°分析资料,对0917号台风"芭玛"折向东南向移动原因进行了分析。结果表明,中高纬度环流调整是"芭玛"折向东南向移动的根本原因;0918号台风"茉莉"通过改变外围环境场的强度、形状对"芭玛"台风产生间接影响,而两台风之间逆时针互旋以及台风"茉莉"外围强大的环流对台风"芭玛"的直接作用是台风"芭玛"折向东南向移动的关键。对台风"芭玛"经纬向UV最大风速变化诊断分析表明,"芭玛"经纬向UV最大风速中心的转移对"芭玛"折向东南向移动有重要影响,经纬向UV最大风速差的变化对"芭玛"转向具有预示作用,经纬向最大风速差的合成风方向与台风中心未来移动方向有一定的关系。     

星载激光雷达卫星海面风场反演算法研究

The principal purpose of this paper is to extract entire sea surface wind＇s information from spaceborne lidar, and particularly to utilize a appropriate algorithm for removing the interference information due to white caps and subsurface water. Wind speeds are obtained through empirical relationship with sea surface mean square slopes. Wind directions are derived from relationship between wind speeds and wind directions im plied in CMOD5n geophysical models function （GMF）. Whitecaps backscattering signals were distinguished with the help of lidar depolarization ratio measurements and rectified by whitecaps coverage equation. Subsurface water backscattering signals were corrected by means of inverse distance weighted （IDW） from neighborhood non-singular data with optimal subsurface water backscattering calibration parameters. To verify the algorithm reliably, it selected NDBC＇s TAO buoy-laying area as survey region in camparison with buoys＇ wind field data and METOP satellite ASCAT of 25 km single orbit wind field data after temporal-spa tial matching. Validation results showed that the retrieval algorithm works well in terms of root mean square error （RMSE） less than 2m/s and wind direction＇s RMSE less than 21 degree.     

178Hz正弦波对刺参行为、呼吸及免疫应答的影响

根据山东荣成沿岸风电机组产生的声波范围选取其中178Hz的峰值声音,声压级控制于(85±5)d B,在实验室水槽中,采用实验生态学方法研究了178Hz声波影响下的刺参(Apostichopus japonicus)幼参的行为反应、耗氧率以及体腔液抗氧化酶(CAT、SOD)浓度的变化。通过平均聚集率的变化比较,发现刺参对178Hz的声波胁迫环境的行为反应敏感;利用空瓶法测得幼参耗氧率显著低于对照组(P0.05);通过测定刺参体腔液免疫活性发现在该频率声波干扰下的刺参CAT活性显著高于对照组(P0.05),而SOD活性于对照组差异不明显(P0.05)。研究结果说明声波对刺参幼参的呼吸和免疫会产生明显影响,可为我国近海刺参养殖和风电发展策略提供参考。     

Effects of Mudstone Particle Content on Shear Strength of a Crushed Sandstone–Mudstone Particle Mixture

The present study focuses on the shear strength, deformation, and particle crushing of sand which is mixed by crushed sandstone and mudstone particles. Two triaxial tests—one for unsaturated specimens and the other for saturated specimens—were performed, along with sieve analysis tests. Results obtained from the triaxial tests indicate that, with the increment of the mudstone particle content by weight, the angle of internal friction decreases, the cohesion increases and then decreases, and both the initial angle of shearing resistance at the atmospheric pressure and decremental angle increase and then decrease. Compared to the unsaturated specimens, the deviator stress or normalized deviator stress of the saturated specimens at the same axial stress may decrease due to the wetting action. Thus, the shear strength of the tested materials may be reduced by the wetting action. Results of sieve analysis tests indicate that the mixing of some mudstone particles into the sandstone particle mixture may reduce the amount of particle crushing, but the wetting action may increase the amount. The amount of the crushed particle may arrive at a minimum of 40% of mudstone particle content by weight.