秦皇岛砂滩海洋线虫的数量研究

在两年的周期内,对秦皇岛4个砂滩的海洋线虫进行了6次芯样采集。灯塔、新煤码头、汤河口和北戴河赤土山4个砂滩均系分选好的细砂或中细砂,其中值粒径为140-285μm。对连续16个芯样计数的变异性所做的测试证明,1,2和3个芯样计算所得95％C.L.分别是0.539X—1.855X,0.647X—1.547X和0.700X—1.428X。秦皇岛砂滩海洋线虫的年平均密度:中潮带上区为1381±441 inds.10cm~(-2)。中潮带下区为1264±538 inds.10cm~(-2)。灯塔和新煤码头砂滩,8月出现高密度值,与温度的季节变化相符合,而汤河口则出现最低值,可能与污染物的大量排出有关。多数砂滩的大部分芯样显示了明显的重直分布,即种群数量的大部分集中在芯样顶部的两个分层:0～4和5～8cm。没有发现垂直分布的季节变化趋势。与世界其他海区砂滩的资料进行了比较。     

Adaptive fisheries management in Vietnam: The use of indicators and the introduction of a multi-disciplinary Marine Fisheries Specialist Team to support implementation

Vietnam is in the process of introducing adaptive management based on indicators and time-series to manage its marine fisheries. The development of indicator-based frameworks for fisheries management has accelerated in recent years. This article describes the suite of indicators being suggested or used in Vietnam including the data-collection system. The Vietnamese approach is supported by an institutional structure consisting of a multi-disciplinary advisory system to facilitate the process of using indicators and to introduce knowledge-based management. The article concludes by identifying current problems and weaknesses and by providing suggestions for future improvement of the system.     

黄海溶解氧垂直分布最大值的成因

本文对黄海溶解氧垂直分布中最大值的成因进行了探讨．认为：浮游植物春花期光合作用产生的大量氧，是溶解氧垂直分布最大值得以在春季（5月）形成的基础；而良好的温、密跃层的存在是氧最大值得以形成的必要条件，夏季叶绿素最大值层中较强的光合作用，是氧最大值在夏季得以维持甚至增强的主要原因．提出：黄海春、夏季溶解氧垂直分布中的最大值并非主要由冬季保持而来．     

海面对风应力的非定常响应

针对常垂直湍流系数和变垂直湍流系数两种情况，给出了开阔静止海面对风应力的非定常响应的解析表达式，并讨论了水深，风应力强弱对响应过程的影响，尽管没有考虑风场的非定常性，但本文的结果对理解海洋对风应力的非定常响应过程具有一定的帮助，对分析海面停风后的消衰过程也具有实际意义。通过与实测资料比较，认为垂直湍流系数模式要比常垂直湍流系数模式更为合理。     

A phase-resolving cross shore sediment transport model for beach profile evolution

A phase-resolving wave transformation module is combined with an intra-wave sediment transport module to calculate the on-/offshore sediment transport rates. The wave module is based on the Boussinesq equations extended into the surf zone. The vertical variation of the mean undertow and the intra-wave sediment concentrations are calculated. The net sediment transport rates are calculated, and the equation for conservation of sediment is solved to predict the beach profile evolution. The results of the present paper showed that the undertow contribution to the sediment transport rates is not dominating in all parts of the surf zone, even for eroding beaches, suggesting that other contributions should not be neglected. The present model also showed that for the same offshore wave energy the time series of the oscillatory motion is important and that the effect of wave groups cannot be disregarded.     

Sedimentary characteristics and the implications of cobalt-rich crusts resources at Caiwei Guyot in the Western Pacific Ocean

Abstract

Cobalt-rich crust has attracted increased attention due to their economic value. Studies have indicated that seamounts in the Western Pacific Ocean are rich in cobalt-rich crust resources. The Caiwei Guyot in Western Pacific Ocean is one of the cobalt-rich crust exploration areas contracted between China and the International Seabed Authority. A large volume of research has been conducted to elucidate the tectonic evolution, basement type, sediment type, gravity and magnetic anomaly characteristics, and geochemical characteristics of shallow surface sediments at Caiwei Guyot. However, a research gap exists on the sedimentary strata below the pelagic deposits and above the volcanic basement of the Caiwei Guyot. This paper summarizes that two main types of sediments existing on the top of Caiwei Guyot. The deposition thickness on the top of Caiwei Guyot is characterized by three sedimentary centers and exposed periphery. Pelagic sediments are difficult to form at the northeastern portion and edge area of Caiwei Guyot due to the strong bottom current environment, which makes these areas suitable for crust growth. This paper delineated three cobalt-rich crust prospective areas at the Caiwei Guyot with of significant implications for exploration and mining-lease-block selections at Caiwei Guyot.     

High-resolution shallow seismic identification of gas escape features in the sediments of Loch Tay, Scotland: tectonic and microbiological associations

High-resolution seismic reflection profiles (3·5 kHz) have revealed the presence of extensive interstitial gas accumulation within the sedimentary sequences of Loch Tay, Scotland, as identified by acoustic turbidity masking the seismic stratigraphy. Within the central section of the loch, in the deepest water area directly above the zone of the seismically active Loch Tay Fault, focused flows of gas through the sediment pile to the loch bed via chimneys and pockmarks, together with gas seeps within the water column, have been identified. Microbiological observations indicate that the gas is biogenic CH₄, produced by both chemoautotrophic (which use CO₂ as a source of carbon and H₂ as a source of energy) and aceticlastic species (which use acetate as a source of carbon and energy) of methanogens in the fine-grained, organic rich deposits that have been focused into the zone of accumulation in the deep central part of the loch. The spatial distribution of the gas escape features suggests that earthquake movements along the Loch Tay Fault are responsible for facilitating focused gas escape in this part of the loch, by the creation of new pathways and conduits through the sediment pile, along which gas can migrate upwards and exit into the water column. Relict pockmarks and associated chimneys identified in the seismic records indicate that gas escape has been taking place since Pleistocene times though the precise timings cannot be ascertained. This is the first time that such features have been reported from a lake in the UK.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

Vertical distribution and water solubility of phosphorus and heavy metals in sediments of the St. Lucie Estuary, South Florida, USA

Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.