一种改进的MODIS影像BRDF辐射校正方法

针时二向性造成的辐射失真，在核驱动模型的基础上提出了一种改进的二向性反射分布模型，并通过时MODIS影像的试验，得到了减弱辐射差异的较好效果，并对试验结果进行了分析和评价。     

宁夏气象影视数字化节目制作系统的建立

在信息传播媒体的竞争日益严酷的时代,面对天气预报节目只依靠简单的画面加解说,拉洋片式传统方法这样一种一成不变的局面,策划创意制作出《天气资讯》节目,打破天气预报节目以往的节目形式和播出形式,以极少的投入获得最大的社会效益和经济效益。     

不同降水天气系统自然降水特征及火箭人工增雨潜力分析

统计分析了1981~2000年20年中15种降水天气系统影响下河北地区自然降水特征,并对火箭人工增雨的潜力进行了初步分析。统计分析表明:西来槽类、高空低涡类、冷锋、切变线和副高后部等天气系统是影响河北地区的主要降水系统,其降雨量和降雨日数占到了90%以上;不同的天气系统在不同季节对降水的贡献有所不同,其中西来槽类的降雨量和降雨日数均居首位,开展人工增雨催化作业机会最多;夏季降水系统最强,云水资源最为丰富,人工增雨潜力很大,是开展火箭人工增雨催化作业的最佳季节,春秋两季增雨潜力明显比夏季小,冬季最小;倒槽、副高后部、台风低压、高空低涡类和气旋类等系统最强,日降雨量和单位面积降雨量明显比其它系统大,尤其对蓄水型火箭增雨作业十分有利。     

闽东北地区夏季对流云特征的初步分析

利用新一代天气雷达资料分析闽东北地区夏季对流云的回波特征。分析表明:多单体合并对流云在生命史、回波高度、强度、尺度等方面都超过了单体对流云,其液态水总量也更大,自然降水条件和人工影响潜力都优于单体对流云,是夏季降水和人工催化的重要云系。分析得到对流云发展的不同阶段、不同高度层辐合辐散特点,为进一步研究夏季对流云结构和降水原理提供科学依据。通过对两个个例的天气形势分析,指出冷空气对对流发展有一定的激发作用。     

Crustal and upper mantle seismic structure of the Australian Plate, South Island, New Zealand

Seismic reflection and refraction data were collected west of New Zealand's South Island parallel to the Pacific–Australian Plate boundary. The obliquely convergent plate boundary is marked at the surface by the Alpine Fault, which juxtaposes continental crust of each plate. The data are used to study the crustal and uppermost mantle structure and provide a link between other seismic transects which cross the plate boundary. Arrival times of wide-angle reflected and refracted events from 13 recording stations are used to construct a 380-km long crustal velocity model. The model shows that, beneath a 2–4-km thick sedimentary veneer, the crust consists of two layers. The upper layer velocities increase from 5.4–5.9 km/s at the top of the layer to 6.3 km/s at the base of the layer. The base of the layer is mainly about 20 km deep but deepens to 25 km at its southern end. The lower layer velocities range from 6.3 to 7.1 km/s, and are commonly around 6.5 km/s at the top of the layer and 6.7 km/s at the base. Beneath the lower layer, the model has velocities of 8.2–8.5 km/s, typical of mantle material. The Mohorovicic discontinuity (Moho) therefore lies at the base of the second layer. It is at a depth of around 30 km but shallows over the south–central third of the profile to about 26 km, possibly associated with a southwest dipping detachment fault. The high, variable sub-Moho velocities of 8.2 km/s to 8.5 km/s are inferred to result from strong upper mantle anisotropy. Multichannel seismic reflection data cover about 220 km of the southern part of the modelled section. Beneath the well-layered Oligocene to recent sedimentary section, the crustal section is broadly divided into two zones, which correspond to the two layers of the velocity model. The upper layer (down to about 7–9 s two-way travel time) has few reflections. The lower layer (down to about 11 s two-way time) contains many strong, subparallel reflections. The base of this reflective zone is the Moho. Bi-vergent dipping reflective zones within this lower crustal layer are interpreted as interwedging structures common in areas of crustal shortening. These structures and the strong northeast dipping reflections beneath the Moho towards the north end of the (MCS) line are interpreted to be caused by Paleozoic north-dipping subduction and terrane collision at the margin of Gondwana. Deeper mantle reflections with variable dip are observed on the wide-angle gathers. Travel-time modelling of these events by ray-tracing through the established velocity model indicates depths of 50–110 km for these events. They show little coherence in dip and may be caused side-swipe from the adjacent crustal root under the Southern Alps or from the upper mantle density anomalies inferred from teleseismic data under the crustal root.     

Directional dependence of P- and S-wave propagation and polarization in foliated rocks from the Kola superdeep well: Evidence from laboratory measurements and calculations based on TOF neutron diffraction

We have measured P- and S-wave velocities on two amphibolite and two gneiss samples from the Kola superdeep borehole as a function of pressure (up to 600 MPa) and temperature (up to 600 °C). The velocity measurements include compressional (Vp) and shear wave velocities (Vs1, Vs2) propagating in three orthogonal directions which were in general not parallel to inherent rock symmetry axes or planes. The measurements are accompanied by 3D-velocities calculations based on lattice preferred orientation (LPO) obtained by TOF (Time Of Flight) neutron diffraction analysis which allows the investigation of bulk volumes up to several cubic centimetres due to the high penetration depth of neutrons. The LPO-based numerical velocity calculations give important information on the different contribution of the various rock-forming minerals to bulk elastic anisotropy and on the relations of seismic anisotropy, shear wave splitting, and shear wave polarization to the structural reference frame (foliation and lineation). Comparison with measured velocities obtained for the three propagation directions that were not in accordance with the structural frame of the rocks (foliation and lineation) demonstrate that for shear waves propagating through anisotropic rocks the vibration directions are as important as the propagation directions. The study demonstrates that proper measurement of shear wave splitting by means of two orthogonal polarized sending and receiving shear wave transducers is only possible when their propagation and polarization directions are parallel and normal to foliation and lineation, respectively.     

An innovative priming system - emulsion-based booster

The mineral industry is leading towards a technology driven optimization process. Drilling and blasting are such unit operations in a mine, which can alter the balance sheet of the mine if not planned properly. The development, improvement and utilization of innovative technologies in terms of blast monitoring instruments and explosives technology are important for cost effectiveness and safety of mineral industries.

The ever-growing demand for minerals has compelled the industry to adopt large opencast projects using heavy equipment. This has necessitated use of a few hundred tonnes of explosives in each blast. The bulk delivered fourth generation explosives have solved the problem of explosive loading to a large extent as it provides improved safety in manufacturing, transportation and handling. Bulk delivered emulsion is non-explosive until gasification is complete and a large quantity of explosive can be transported and loaded into blast holes efficiently and with safety. The priming of bulk delivered explosives in Indian mines uses the conventional PETN/TNT-based boosters. The conventional booster possesses safety problems in terms of handling and use, so Indian Explosives Ltd has developed an emulsion-based booster (Powergel Boost).

This paper explores the potential of an emulsion-based booster used as a primer to initiate bulk delivered emulsion explosives used in mines. An attempt has been made at a comparative study between the conventional booster and the emulsion-based booster in terms of the initiation process developed and their capability of developing and maintaining a stable detonation process in the column explosives. The study has been conducted using a continuous velocity of detonation (VOD) measuring instrument, the VODMate two channel system manufactured by Instantel Inc. of Canada. During this study three blasts were monitored. In each blast two holes were selected for study, the first hole was initiated using a conventional booster while the other one used an emulsion-based booster. The findings of the study advocates that the emulsion-based booster is capable of the efficient priming of bulk delivered column explosive with a stable detonation process in the column.     

A probabilistic approach for computing water retention of particulate systems from statistics of grain size and tessellated pore network

The paper offers an analytical determination of the hydraulic properties of an unsaturated soil with reference to its retention curve, which describes the relationship between the volumetric water content and capillarity through matric suction. The analysis combines a particulate approach focused on the physics at the pore scale, including microstructural aspects, with a probabilistic approach where the void space and grain size are considered as random variables. In the end, the soil water characteristic curve of an unsaturated granular medium along a drying path can be derived analytically based on the sole information of particle size distribution. The analysis hinges on the tessellation of a wet granular system into an assemblage of tetrahedral unit cells revealing a pore network upon which capillary physics are computed with respect to pore throat invasion by a non-wetting fluid with evolving pendular capillary bridges. The crux of the paper is to pass from particle size probability distribution to a matching void space distribution to eventually reveal key information such as void cell and solid volume statistics. Making reasonable statistically based assumptions to render calculations tractable, the water retention curve can be readily constructed. Model predictions compare quite favourably with experimental data available for actual soils, especially in the high saturation range. Having a sound scientific basis, the model can be made amenable to address a variety of soils with a wider range of particle sizes.     

基于地性线分级的DEM信息量计算方法研究

主要对基于DEM提取的地性线进行信息量的定量分析,探讨地性线的信息量与分辨率、地形单元的关系。这个过程中首先利用河网的自相似理论研究与当前DEM所代表的地貌详细程度相适宜的地性线提取的阈值区间,并讨论此阈值下地性线的分级,以此为基础通过以该分级为权重进行DEM地形信息量的计算。实践证明,这种顾及地性线等级的DEM信息量计算方法能较准确地反映地性线的分布规律和不同等级的要素造成的信息量度量差异。     

重庆市滑坡灾害时空特征分析

重庆市是滑坡灾害高发的城市,滑坡灾害每年都会造成大量的人员伤亡和经济损失。本文结合历年滑坡统计资料,基于GIS平台,分析重庆市滑坡灾害的时空分布特征。自1980年起,重庆发生滑坡的次数明显增加,且集中发生在5~9月,尤其是7月。80%以上的滑坡为降雨引发,其次是自然灾害和人类活动,人类活动诱发滑坡灾害增长速度最快。重庆滑坡密度大的地区为市区以及万州区、忠县等三峡库区核心地带,滑坡高发地区有东北向西南方向变化的趋势。