L1相关速度谱

本文提出了Lp相关的基本概念、定义及性质。特别分析了P=1的L1相关与普通相关不同的特点,并将之应用于地震信号速度谱分析。本文分析了速度信息寄载于地震记录中的基本特点,并采用L1相关技术进行速度分析。结果表明,它比普通相关及符号位相关能更充分地提取地震信号中的速度信息,从而提高速度谱的质量和抗干扰能力。L1相关不用乘法运算,因而大大减少了运算量。 使用新方法和普通方法对理论模型和实际地震信号进行对比研究,结果说明新方法的改善效果是明显的。     

Input-output Balances of Nutrients and Plankton in a Flooded Area of the Lower Odra

The retention of particulate matter of the Odra River in flooded areas was estimated by determining suspended particulate matter (SPM) elimination and particle-bound nutrient retention in a polder area of the Lower Odra Valley national park. Water and suspended matter samples collected before, during, and after the 1997 summer flood at the inlet and the outlet of the investigated polder (Polder A/B close to Schwedt) offer the opportunity to balance the matter retention inside the floodplain. The maximum level of retained SPM (more than 80%) was calculated for the record flood of summer 1997, while in ordinary winter floods retention differs between 33% and 70%. Basic properties of the flowing particles like settling velocity, density, loss on ignition etc. change on their way through the polder area. In the investigated Polder A/B a retention of at least 50% of particle-bound phosphorus which was independent of the incoming suspended matter load from the Odra River was observed. The retention of particle-bound nitrogen and carbon varied seasonally to different extents. The presented balance demonstrates that particle-bound nutrient retention in polders is an important factor in the self-purification process of the river system. Some additional effort was done to study changes of plankton composition: during a joint field experiment in spring 1998, the authors determined biological parameters (abundance and biomass of phytoplankton and zooplankton) of water samples at polder inflow and outflow points.     

跨孔观测地震数据的速度重建

利用矢量射线追踪正演模拟技术 ,计算地震波传播的路径及走时 ,进而利用射线走时及路径的内插 ,发展了弯曲射线迭代反演技术 .该方法可用来重建井间地层的速度图像 .基于所发展的方法 ,我们对两种较为复杂的典型地质模型进行了井间速度重建 .结果表明该方法是一项快速、高精度的跨孔数据速度重建技术     

分布式光纤声波传感微振动响应特征

分布式光纤声波传感技术(Distributed Acoustic Sensing, DAS)利用光纤中的瑞利散射来获取振动信息, 具有高密度、低成本、可长时监测等优点, 目前已经广泛应用于地震勘探领域.DAS系统可用于采集沿光纤轴向的应变或应变率, 且DAS响应与地震波传播方向和偏振方向有关.本文推导获得了不同震源模型的应变辐射花样, 并通过数值模拟获得了不同震源机制和不同布设条件下的分布式光纤微振动数据.理论合成算例结果表明, P波的应变辐射花样和速度辐射花样在各类震源机制条件下都具有较为相似的形态, 而S波的两种辐射花样在某些震源机制条件下具有较为明显的形态差异.此外, 包含DC(Double Couple, 双力偶)成分震源的S波DAS响应记录与常规速度检波器记录相比, 极性反转的位置具有较大差异.

     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

Modeling forced pool–riffle hydraulics in a boulder-bed stream, southern California

The mechanisms which control the formation and maintenance of pool–riffles are fundamental aspects of channel form and process. Most of the previous investigations on pool–riffle sequences have focused on alluvial rivers, and relatively few exist on the maintenance of these bedforms in boulder-bed channels. Here, we use a high-resolution two-dimensional flow model to investigate the interactions among large roughness elements, channel hydraulics, and the maintenance of a forced pool–riffle sequence in a boulder-bed stream. Model output indicates that at low discharge, a peak zone of shear stress and velocity occurs over the riffle. At or near bankfull discharge, the peak in velocity and shear stress is found at the pool head because of strong flow convergence created by large roughness elements. The strength of flow convergence is enhanced during model simulations of bankfull flow, resulting in a narrow, high velocity core that is translated through the pool head and pool center. The jet is strengthened by a backwater effect upstream of the constriction and the development of an eddy zone on the lee side of the boulder. The extent of flow convergence and divergence is quantified by identifying the effective width, defined here as the width which conveys 90% of the highest modeled velocities. At low flow, the ratio of effective width between the pool and riffle is roughly 1:1, indicating little flow convergence or divergence. At bankfull discharge, the ratio of effective width is approximately 1:3 between the pool and downstream riffle, illustrating the strong flow convergence at the pool head. The effective width tends to equalize again with a ratio of 1:1 between the pool and riffle during a modeled discharge of a five-year flood, as the large roughness elements above the pool become drowned out. Results suggest that forced pool–riffle sequences in boulder-bed streams are maintained by flows at or near bankfull discharge because of stage-dependent variability in depth-averaged velocity and tractive force.     

基于Duffing振子混沌系统的地震速度分析方法

强随机噪声干扰是导致地震勘探资料低信噪比的主要原因,如何在强随机噪声干扰下获取有效的信息是值得关注的问题.Duffing振子混沌系统是一个非线性的动力学系统,其对强随机噪声具有免疫能力,而对特定的周期性信号具有敏感性.本文提出一种基于Duffing振子混沌系统的速度分析方法.对CMP道集按照时距曲线关系进行移动窗口截取,将所截取的信号构建为待测信号加入Duffing振子混沌系统,通过相图网格分割方法(GPM)判断系统状态的改变,从而在强随机噪声背景下获得高分辨率的速度谱.理论模型和实际资料的处理结果表明,与传统的水平叠加速度分析方法相比,本方法能够在强随机噪声背景下获得更准确的速度分析结果.     

用于速度图象重建的层析成象法

本文提出了一种用于速度图象重建的层析成象法。特别注意到地震学上的ST与医学上的CT的不尽相同之处,并处理了由此引起的困难。与速度图象重建有关的正问题的分析表明,不同频率范围的资料其分辨能力是不同的,因此,区域地震与远震资料的解释应予注意。本文有关速度图象重建的讨论不仅涉及到与成象方法有关的反演理论和方法,还给出了进行数值计算的内存量和运算量的分析。关于重建图象的质量评价,还给出了反演解的可靠性分析,为分辨特性的描述提供了一种既简便又形象直观的方案。 本文的方法与现行主要方法的比较表明:1.本文的方法允许存在速度间断面,有利于揭示不同构造区域的地壳厚度的差异;2.在常用的方法中,作为正问题假定的常速度块同反演结果解释时非常速度块之间不协调。由于我们把给定网格点的速度值的插值函数作为速度的空间函数,这一困难已被解决;3.相对于Aki等的一般方法,本文的内存量节省约一个量级、运算量减少约一半;4.相对于ART类方法本身不能给出成象结果的可靠性分析,本文的方法则具有显著的优点。 作者在分析了天然地震资料的状况之后相信,对充分利用我国地震台网的现有观测资料,本文的方法是有效的。     

中强地震前中小地震速度谱的变化特征

从Ｄｕｄａ和Ｎｏｒｔｍａｎｎ提出的谱震级定义出发,利用江苏地区遥测台网的５个台站记录到的５４次地震的数字化垂向位移波形记录,采用１３组０．５倍频程的滤波器,计算了各次地震的Ｐ波和及Ｓ波在没中心周期处的平均速度谱值,研究了地震的Ｐ波或Ｓ波速度谱的拐角周期及综合因子ｆ值的时间变化特征。结果显示：中强地震发生之前１年或更短的时间内所发生的中小地震,其速度谱综合因子ｆ值随时间的变化具有由高值向低值的变化趋     

2015年8月12日天津化学爆炸产生的多模式面波分析及其应用研究

2015年8月12日天津滨海新区发生的强烈化学品爆炸造成了巨大的经济损失和社会影响.天津爆炸产生了清晰的大振幅面波信号,分析结果表明这组信号由基阶和高阶面波组成,可以追踪到约135 km外的远处台站.利用这组面波信号分别开展了以下研究：（1）利用附近三个台站记录的四个单频基阶Rayleigh波信号对爆破事件的绝对位置进行了网格搜索,结果与利用GPS测量的位置相差仅0.498 km;（2）分别利用网格搜索和主事件定位法,对两次子事件的相对位置进行了确定,距离约75 m左右,与前人研究结果吻合;（3）从面波记录中测量到36条基阶Rayleigh波、49条第一高阶Rayleigh波、9条基阶Love波和29条第一高阶Love波的频散曲线,并进一步反演获得研究区域地下4 km内的S波速度结构.反演结果显示地表处S波速度低至0.375 km·s^-1,在小于1 km的浅地表速度梯度较大,符合典型的盆地结构特征.本文的研究结果为类似爆炸等突发事件快速定位提供了新的思路,有助于灾后救援的迅速展开;同时得到天津滨海新区及周边浅层精细的速度结构,对于地震灾害评估有很大帮助.