3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.     

不同生长期坛紫菜多糖中组分含量的变化

于１９９０－１９９１年，运用＾１３Ｃ－ＮＭＲ和化学分析方法研究南方产和移植北方养殖的不同生长发育阶段坛紫菜多糖的组分变化，结果表明，随着藻体生长发育，坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖和６－ＯＣＨ３－Ｄ－半乳糖的含量逐渐增加，而硫酸基的含量呈现先增加后减少的规律；北移坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖的含量高于南方坛紫菜，而硫酸基和６－ＯＣＨ３－Ｄ－半乳糖的含量低于南方坛紫菜。     

Geochemical cycling in the Hooghly estuary, India

U–Th decay series isotopes, δ¹⁸O and Si measurements in the river estuarine waters and sediments of the polluted Hooghly estuary as well as the surface waters of the Bay of Bengal, its high salinity end member, are reported. Dissolved Si indicates that there are probably two mixing regimes, dissolved U behaviour is nonconservative and δ¹⁸O behaves conservatively in the overall estuarine region. Isotopes of reactive elements, viz. ²³⁴Th and ²¹⁰Po, are removed from the estuarine waters in <2 days and <1 month, respectively, which is due to high suspended matter (30–301 mg l⁻¹). ²²⁸Ra and ²²⁶Ra are profusely released into the estuarine waters in the low to mid-salinity regions.As expected, the opposite trend is observed in the case of estuarine sediments and suspended matter. Reactive isotopes of Th, ²¹⁰Pb and ²¹⁰Po are enriched, whereas Ra isotopes are depleted with respect to their parent nuclides in the estuarine sediments and suspended matter. ²³²Th/Al ratio appears well suited to study the distribution and mixing of the bed load sediments of the Ganga–Brahmaputra (G–B) and the Hooghly rivers with those from other rivers on the Bay of Bengal floor.     

双尾亚科一新种（吸虫纲：半尾科）

本文报道芽腺属吸虫一新种，即矶鲈芽腺吸虫，新种LecithocladiumparapristipomatissP．nov.，虫体大小1.24～1．74×0．25～0．45mm；虫卵18～22×9～12μm。     

牙鲆(Paralichthys olivaceus)秦皇岛弧菌感染症及其病原细菌研究

采用病原分离与鉴定、人工感染试验等方法,在对养殖牙鲆病例进行发病情况、病理变化特征检验的基础上,进行病原学检验。结果表明,此病例属于由弧菌属(VibrioPacini1854)细菌引起的败血感染症。经对12株纯培养菌(HQ010712-1—HQ010712-12)进行形态特征、理化特性等表观分类学指征的检验,选择代表菌株(HQ010712-1株)进行16S rRNA基因的测定与系统发育学分析等,判定为弧菌属的一个新种。将HQ010712-1株送中国典型培养物保藏中心(CCTCC)进行了复核鉴定与分类定名,依据分离地定名为秦皇岛弧菌(Vibrioqinhuangdaorasp.nov.);参考菌株为HQ010712-1。     

种植盐地碱蓬修复滨海盐渍土效果的研究

利用盐生植物——盐地碱蓬进行天津河口滨海盐碱地的生物修复。通过比较种植盐地碱蓬土壤和对照土壤的电导率、有机质和微生物数量的差异等研究了其修复效果。结果表明，种植区碱蓬根际土壤的电导率与对照土壤相比下降了13％；有机质和总氮与对照土壤相比分别增加43％和18％；根际土壤的微生物数量明显增加，放线菌和真菌分别比对照增加了5倍和16倍。根际微生物优势种群的盐耐受性结果显示，部分根际土壤的优势种群的盐耐受性明显下降，耐盐性较低的微生物种群已成为优势种群。以上结果表明，种植盐地碱蓬对改善滨海盐碱地的生态有明显的效果。