Kinematic wave solutions for pollutant transport over an infiltrating plane with finite‐period mixing and mixing zone

Kinematic wave solutions are derived for transport of a conservative non‐point‐source pollutant during a rainfall‐runoff event over an infiltrating plane for two cases: (i) finite‐period mixing and (ii) soil‐mixing zone. Rainfall is assumed to be steady, uniform and finite in duration, and it is assumed to have zero concentration of pollutants. Infiltration is assumed constant in time and space. Prior to the start of rainfall, the pollutant is distributed uniformly over the plane. In the first case, when rainfall occurs, the mixing of pollutant in the runoff water occurs in a finite period of time. In the second case, the chemical concentration is assumed to be a linearly decreasing function of rainfall intensity and overland flow. The solute concentration and discharge are found to depend on the flow characteristics as well as the solute concentration parameters. The characteristics of solute concentration and discharge graphs seem to be similar to those reported in the literature and observed in laboratory experiments. Copyright © 2002 John Wiley & Sons, Ltd.     

A simplified analysis of interface failure under compressive normal stress and monotonic or cyclic shear loading

Interface damage and delamination is usually accompanied by frictional slip at contacting interfaces under compressive normal stress. The present work is concerned with an analysis of progressive interface failure using the cohesive crack model with the critical stress softening and frictional traction present at the contact. Both monotonic and cyclic loadings are considered for anti‐plane shear of an elastic plate bonded to a rigid substrate by means of cohesive interface. An analytical solution can be obtained by neglecting the effect of minor shear stress component. The analysis of progressive delamination process revealed three solution types, namely: short, medium and long plate solutions. The long plate solution was obtained under an assumption of quasistatic progressive growth of the delamination zone. In view of snap back response, the quasistatic deformation process cannot be executed by either traction or displacement control. The states of frictional slip accompanied by shake down or incremental failure are distinguished in the case of cyclic loading, related to load amplitude and structural dimensions. The analysis provides a reference solution for numerical treatment of more complex cases. Copyright © 2005 John Wiley & Sons, Ltd.     

“翻台法”提高地震定位精度的数学原理

对于震中偏离台网情况下的地震定位，常规方法定位效果较差。“翻台法”有效地提高了其定位精度。从均匀地壳模型的走时方程组出发，分析了“翻台法”定位中方程组系数的变化特点，推导了选取最佳翻转台站的方法，并得出如下结论：（１）“翻台法”增加了原定位方程组的约束方程，翻台数与已知条件和所求参数个数有关，从理论上讲，翻转台数超过独立的约束方程数时对增加定位精度不再有意义；（２）考虑到具体的台网布局和台站资料质量，翻转不同台站对提高地震定位精度所起的作用大小各不相同，因而存在选取最佳翻转台站问题。     

Structural and stratigraphical constraints on the kinematics history of the Southern Tan–Lu Fault Zone during the Mesozoic Anhui Province, China

The Tan–Lu Fault Zone (TLFZ) extends in a NNE–SSW direction for more than 2000 km in Eastern China. It has been considered either as a major sinistral strike-slip fault, as a suture zone or as a normal fault. We have conducted a structural analysis of the southern segment of this fault zone (STLFZ) in the Anhui Province. The ages (Triassic to Palaeocene) of the formations affected by the faults have been re-appraised taking into account recent stratigraphical studies to better constraint the ages of the successive stages of the kinematics of the STLFZ. Subsequently, the kinematics of the faults is presented in terms of strain/stress fields by inversion of the striated fault set data. Finally, the data are discussed in the light of the results obtained by previous workers.We propose the following history of the STLFZ kinematics during the Mesozoic. At the time of collision, a  NNE orientated Tan–Lu margin probably connected two margins located north of the Dabie and Sulu collision belts. During the Middle–Late Triassic, the SCB has been obliquely subducted below the NCB along this margin which has acted as a compressional transfer zone between the Dabie and Sulu continental subduction zones. The STLFZ has been initiated during the Early Jurassic and has acted as a sinistral transform fault during the Jurassic, following which the NCB/SCB collision stopped. A  NW-trending extension related to metamorphic domes was active during the basal Early Cretaceous ( 135–130 Ma); it has been followed by a NW–SE compression and a NE–SW tension during the middle–late Early Cretaceous ( 127 to  105 Ma, possibly  95 Ma); at that time the TLFZ was a sinistral transcurrent fault within the eastern part of the Asian continent. During the Late Cretaceous–Palaeocene, the STLFZ was a normal fault zone under a WNW–ESE tension.     

Abiotic Methane Reservoirs in the Western Tianshan HP–UHP Metamorphic Belt,China

Natural gas, consisting primarily of methane(CH₄), has become a major source of clean energy in modern society in many parts of the globe. Recent experimental observations and discoveries of deep-sourced abiotic CH₄ in cold subduction zones indicate the important ability of cold subducted slabs to generate natural gas reservoirs. However, most CH₄ flux and reservoirs remain unknown and their potential is overlooked in global carbon flux estimations. Massive abiot...     

Coherent Chemical Variation Trends of the 55-25 Ma Magmatic Rocks in SE Tibet:N-S Direction Lithospheric Stretching of Eurasia during Early Stage of India-Eurasia Collision

The progressive indentation of India into Eurasia generated an E–W-trending orthogonal collision belt and a N–S-trending oblique collision belt. Compiling available data reveals that ～70% of the Cenozoic igneous rocks in eastern and southeastern Tibet are concentrated within an ENE-trending, ～550-km long and ～250-km wide magmatic zone(CMZ) that once separated the orthogonal and oblique collision belts. The Latitude 26°N Line is now its southern boundary. The onset timing of magmatism of the CMZ ...     

西拉木伦构造带克德河砂砾岩的时代及构造意义

西拉木伦构造带北部双井地区发育一套巨厚的、成熟度低的快速堆积的粗碎屑沉积建造,为同造山磨拉石沉积,前人称其为克德河砂砾岩带并将其时代分别划为中二叠世(哲斯组)、晚二叠世(林西组)。本次工作对该套地层进行了大比例尺剖面测量,对取自剖面第下、中、上(1、25、86层)三个部分的砂岩样品进行LA-ICP-MS U-Pb年代学研究,结果显示：3个样品具有相似的主要年龄区间,依次为405-485Ma、401-463Ma、363-520Ma,其峰值年龄分别为427Ma、445Ma、440Ma,锆石数量分别占总量的48％、52.5％和38.75％;其次为大于1000Ma的年龄,锆石数量分别占30.7%、22.5%、45%,且均具有1800Ma和2500Ma左右的峰值年龄,明显具有华北板块基底年龄信息;自下而上3个测年样品最年轻峰值年龄分别为312Ma、376Ma,282Ma,最年轻的锆石年龄分别为304Ma、244Ma和245Ma。在第85层杂色复成分砾岩的灰岩砾石中发现晚石炭－早二叠世阿木山组的蜓和珊瑚化石,在41及43层发现中生代孢粉化石。综合碎屑锆石测年及生物化石研究结果,克德河砂砾岩带的时代应为中三叠世。推测西拉木伦构造带经历了一个较长的演化过程,中二叠世开始华北板块和西伯利亚板块进入碰撞造山阶段, 同造山磨拉石建造(克德河砂砾岩带)标志着中亚造山带演化的终止,华北板块和西伯利亚板块的碰撞拼合造山一直延续到中三叠世才结束。     

哀牢山—红河剪切带新生代热史演化及其构造意义

笔者等通过对哀牢山—红河剪切带5件砂岩磷灰石样品裂变径迹分析,获得测试分析样品的表观年龄,对所有样品利用模拟退火法进行了热史模拟,取得其热演化史;得出哀牢山—红河剪切带在新生代发生了相似的构造演化过程,其经历了2次快速冷却剥露事件,分别发生在37～14 Ma和5. 1～0 Ma,平均冷却速率分别为3. 98℃/Ma和11. 15℃/Ma;在发生快速冷却的时间上,存在自东向西逐渐变晚的趋势,说明哀牢山—红河剪切带在新生代可能为自东向西的幕式隆升。     

鄂尔多斯盆地南部旬邑-宜君地区直罗组古层间氧化带地球化学特征及水-岩作用探讨

鄂尔多斯盆地南部旬邑-宜君地区直罗组古层间氧化带具有明显分带特征,通过对不同分带砂岩主量、微量、稀土元素及环境敏感参数特征对比研究,将旬邑-宜君地区古层间氧化带发育的水-岩作用过程划分成两个阶段：古层间氧化带形成和大规模成矿阶段、二次还原改造阶段。(1)古层间氧化带形成和大规模成矿阶段：含氧水进入目的层砂体,使砂体中Fe²⁺氧化成Fe³⁺(Fe²⁺含量最低,Fe³⁺最高);砂体中的U被氧化为U⁶⁺,形成铀酰腐殖酸盐络合物发生迁移(U、Corg、S含量最低、Th/U比值最高);长石高岭土化使Si发生流失(SiO₂含量降低);携带大量U的氧化流体运移至氧化还原过渡带(Corg、∑S含量最高、Fe²⁺含量仅低于灰绿色砂体),还原剂(有机质和黄铁矿等)将U⁶⁺还原成U⁴⁺,形成沥青铀矿;U⁴⁺与SiO₄^4-发生反应形成铀石(Th/U比...     

Determination of Early Paleozoic metamorphic event in the Longshan Complex and its geological implicationSCIEI北大核心CSCD

长期以来,陇山杂岩的归属问题一直存在争议。本文对出露于秦岭-祁连山结合部位的陇山杂岩中石榴黑云斜长片麻岩和石榴斜长角闪岩进行了详细的岩石学、P-T温压计算、独居石和榍石U-Pb年代学研究。通过详细的岩相学观察,石榴黑云斜长片麻岩的变质峰期矿物组合为石榴子石+黑云母+斜长石+石英;石榴斜长角闪岩中则识别出了以石榴子石+单斜辉石+角闪石+斜长石+石英为峰期的变质矿物组合。通过传统温压计计算,石榴黑云斜长片麻岩(样品21LS40)和石榴斜长角闪岩样品(样品21LS42-1)的峰期变质P-T条件分别为700℃、0.72GPa和710℃、0.74GPa。激光剥蚀电感耦合等离子体质谱(LA-ICP-MS) U-Pb数据表明,石榴黑云斜长片麻岩中独居石的206Pb/238U的加权平均年龄为407~435Ma。石榴斜长角闪岩中榍石的下交点年龄分别为410±7Ma、409±5Ma和426±10Ma,榍石中Zr含量温度计的计算结果分别为750℃、751℃和748℃(假定压力为0.7GPa)。本文从变质作用的角度出发,将陇山杂岩与秦岭杂岩进行温压条件和变质时代对比研究,认为陇山杂岩与东秦岭杂岩高压-超高压岩石的最后一期退变质作用和西秦岭天水地区的秦岭杂岩麻粒岩相变质作用类似,可能为北秦岭造山带的西延。