2012年甘肃金塔Ms5.4级地震发震构造讨论

归纳总结了2012年甘肃金塔M_s5.4地震的基本参数,烈度分布、震害特征和发震构造背景等基本特征。此次地震发生在甘肃北山地区,新构造活动不明显,属构造稳定的地区。地貌上为戈壁丘陵区,震区无居民点,没有造成明显破坏。通过野外地质调查,发现了许多基岩崩塌现象,有些作为路标或导航用的石堆被震倒,其排列方向为NW向。利用震源机制解、余震分布方向和断层活动性调查资料综合分析,认为2012年金塔5.4级地震,是马山南东断层和神螺山一野马井断层共同作用的结果,其发震断层可能为神螺山-野马井断层。     

A NEW FINDING OF SURFACE RUPTURE ZONES ASSOCIATED WITH THE 1936 LINGSHAN M6(3/4) EARTHQUAKE,GUANGXI, CHINA

On April 1, 1936, an M6(3/4) earthquake occurred on the Fangcheng-lingshan Fault. This event is the biggest historical earthquake on the coastal seismic zone, South China ever. But so far, no any findings about the surface rupture of this event have been reported. This paper is the first to find several intact surface rupture zones associated with the 1936 Lingshan seismic event, in the areas of Gaotang, Jiaogengping etc. on the northeast segment of the Fangcheng-Lingshan Fault. According to the field work, the surface rupture stretches to 10km and distributes along NE direction in front of Luoyang Mountain, represented by earthquake scarp, extensional fracture, dextrally faulted gully and river system etc. The characteristics of surface ruptures and faulted landforms indicate that the surface rupture is of normal-dextral strike slip faulting. The trenching on this fault exposed that at least three seismic events have been recorded, including two historical earthquake events and the latest one is the 1936 Lingshan M6(3/4) earthquake. These surface rupture zones are the key to the detection of seismogenic structure and the re-estimate of magnitude of this event. The new finding of these surface rupture zones would be particularly significant for the detection of the seismogenic structure of Lingshan M6(3/4) earthquake.     

地震破裂过程的几何学与运动学特征的模拟

本应用形变破裂和激光全息光弹实验，结合断裂力学的观点研究了地震破裂过程的三个方面：１．地震破裂的力学机制；２．地震破裂的应变特征与运动过程；３．地震破裂过程的应力场分布特征。并分析了地震破裂过程的几何学与运动学特征以及探讨了它们与地震发生。前兆和余震迁移的密切关系。此项研究为活动断层分段研究和地震预报提供了实验证据。     

2014年8月云南鲁甸MS 6.5地震典型地表破裂特征

北京时间2014年8月3日16时30分,云南省鲁甸县发生了M_S 6.5地震,本次地震的发震构造为包谷垴-小河断裂。野外调查发现,王家坡不稳定斜坡上的地表破裂在整个破裂带中比较具有代表性,其地表破裂带整体走向N45°W-N50°W,并且由剪切破裂、张剪切破裂、压剪切破裂、张性破裂以及鼓包等典型地表破裂组成。其中左、右地表破裂边界与发震断层的出露位置一致,由断层错动造成;而部分地表破裂与断层的位置不重合,其成因分为2种,一种是发震断层导致的一些次级地表破裂,另一种是地震引发的滑坡后缘破裂。地表破裂类型和基本组合特征显示出王家坡潜在不稳定斜坡上的地表破裂带具有左旋走滑的性质。     

THE TECTONIC ACTIVITY CHARACTERISTICS OF AWANCANG FAULT IN THE LATE QUATERNARY,THE SUB-STRAND OF THE EASTERN KUNLUN FAULT

It is well known that the slip rate of Kunlun Fault descends at the east segment, but little known about the Awancang Fault and its role in strain partitioning with Kunlun Fault. Whether the sub-strand(Awancang Fault) can rupture simultaneously with Kunlun Fault remains unknown. Based on field investigations, aerial-photo morphological analysis, topographic surveys and ¹⁴C dating of alluvial surfaces, we used displaced terrace risers to estimate geological slip rates along the Awancang Fault, which lies on the western margin of the Ruoergai Basin and the eastern edge of the Tibetan plateau, the results indicate that the slip rate is 3mm/a in the middle Holocene, similar to the reduced value of the Kunlun Fault. The fault consists of two segments with strike N50° W, located at distance about 16km, and converged to single stand to the SE direction. Our results demonstrate that the Awancang fault zone is predominantly left-lateral with a small amount of northeast-verging thrust component. The slip rates decrease sharply about 4mm/a from west to east between the intersection zone of the Awancang Fault and Kunlun Fault. Together with our previous trenching results on the Kunlun Fault, the comparison with slip rates at the Kunlun fault zone suggests that the Awancang fault zone has an important role in strain partitioning for east extension of Kunlun Fault in eastern Tibet. At the same time, the 15km long surface rupture zone of the southeast segment was found at the Awancang Fault. By dating the latest faulted geomorphologic surface, the last event may be since the 1766±54 Cal a BP. Through analysis of the trench, there are four paleoearthquake events identified recurring in situ on the Awancang Fault and the latest event is since (850±30)a BP. The slip rate of the Awancang Fault is almost equivalent to the descending value of the eastern part of the east Kunlun Fault, which can well explain the slip rate decreasing of the eastern part of the east Kunlun Fault(the Maqin-Maqu segment)and the characteristics of the structure dynamics of the eastern edge of the Tibet Plateau. The falling slip rate gradient of the eastern Kunlun Fault corresponds to the geometric characteristic. It is the Awancang Fault, the strand of the East Kunlun Fault that accommodates the strain distribution of the eastward extension of the east Kunlun Fault. This study is helpful to seismic hazard assessment and understanding the deformation mechanism in eastern Tibet.     

汶川8.0级地震发震断层的累积地震位错研究

2008年5月12日,四川省汶川县内发生MS8.0地震。此次地震沿龙门山中央断裂产生1条长达200km的同震地表破裂带。文中选择位于地震地表破裂带北段的南坝镇、凤凰村以及南段的映秀镇这3个地点,以被断层错断的河流阶地为研究对象,对多级阶地面上的地震地表破裂及断层陡坎地貌进行了野外实测工作。经过测量数据的计算和分析,得到了各级阶地上断层陡坎的高度,该值即为该阶地记录的地震断层的累积垂直位错量。若以本次地震的垂直位错量作为古地震位错量的均值,则可计算得到每级阶地累积的地震次数。研究结果表明,各点T1阶地形成以来仅经历过1次事件,即本次地震事件;T2阶地形成以来约经历了5次事件;T3阶地形成以来约经历了9～11次事件;T4阶地形成以来约经历了20次事件。在本文研究的基础上,结合前人的阶地测年数据,则可获得古地震复发间隔的可靠数据     

后差分GPS测量则木河断裂地震微地貌特征

地震微地貌是研究古地震的重要证据。 发生在则木河断裂带上的1850年地震的地表破裂带在人类活动较少的地区得以保存完好。 研究区内地形起伏大, 断塞塘、 断层陡坎、 鼓包等微地震地貌特征明显, 在三维视图内可直观反映测量区内的这些地貌特征。 利用后差分GPS方法测量断裂活动形成的地震微地貌, 水平测量精度可达0.5 m, DEM精度可到一个像元1 m, 是定量化研究地震微地貌的一种新方法。 测量结果表明, 大箐梁子顶部七条干沟对应多次古地震事件; 大箐梁子顶部鼓包被断裂断错, 断塞塘沉积区向南迁移, 鼓包最新断错约4 m, 大箐村南山坡形成50 cm高断层陡坎。 说明大箐梁子一带地震活动性较强, 且以挤压构造为主。     

辽宁城市活断层探测思路与方法探讨

介绍了开展地震活断层探测的意义及在辽宁省开展地震活断层探测的必要性，对在辽宁城市开展活断层探测的基本思路和方法进行了探讨，选取沈阳，抚顺作为试点城市，设定目标区和目标断裂，分别对活断层危险性，危害性和深部发震构造环境进行评价。在断裂探测过程中，确定初步探测和详细探测两个阶段，主要采用人工地震方法并结合钻探，地震划分结果，对目标区内的目标断裂进行评价。     

Numerical simulation for 1975 Haicheng and 1999 Xiuyan earthquake processes by DDA+FEM

Introduction The Xiuyan earthquake(MS=5.4)on Nov.29,1999,occurred between Hushan town and Pi-anling town at the southeast end of the aftershocks of Haicheng earthquake(MS=7.3).These two earthquakes′sequences are highly similar in the way that the foreshocks are very frequent,focal mechanisms of the main shocks are about the same and fault strikes are approximately in the same direction.It is important to study these earthquakes for further research on seismogenesis to fore-cast earthquake…     

Extended finite element framework for fault rupture dynamics including bulk plasticity

We present an explicit extended finite element framework for fault rupture dynamics accommodating bulk plasticity near the fault. The technique is more robust than the standard split‐node method because it can accommodate a fault propagating freely through the interior of finite elements. To fully exploit the explicit algorithmic framework, we perform mass lumping on the enriched finite elements that preserve the kinetic energy of the rigid body and enrichment modes. We show that with this technique, the extended FE solution reproduces the standard split‐node solution, but with the added advantage that it can also accommodate randomly propagating faults. We use different elastoplastic constitutive models appropriate for geomaterials, including the Mohr–Coulomb, Drucker–Prager, modified Cam‐Clay, and a conical plasticity model with a compression cap, to capture off‐fault bulk plasticity. More specifically, the cap model adds robustness to the framework because it can accommodate various modes of deformation, including compaction, dilatation, and shearing. Copyright © 2013 John Wiley & Sons, Ltd.