Advances in the fatigue assessment of wire ropes

This paper presents the findings from an in-depth analysis of the (axial) stiffness data recorded during tension–tension fatigue tests on wire ropes, particularly in relation to how changes in stiffness during testing relate to changes in rope strength. A linear relationship between stiffness and strength is shown to exist and a methodology presented for quantifying residual strength with applied cycles. New lower bound fatigue lines for six-strand rope and spiral strand are presented which are based on a 10% loss of strength. These new lines have the advantage of having been established using a common discard criterion for wire ropes.     

Strength Analysis of Turret Mooring Productive/Storage Tanker

The longitudinal strength of turret mooring productive/storage tanker is studied.A numeri-cal example has been implemented according to the method presented in this paper to give practical il-lustration.From the results of the numerical example,it is concluded that the turret hole located near theforward of the amidships has small effect on the longitudinal strength of the ship hull.As for design ex-treme value of wave bending moment of storage tanker,statistic method is a more reasonablemethodology,especially with the consideration of the servere environmental conditions.The primary esti-mation of design section modulus of turret storage tanker can be determined by this design bending mo-ment.     

Ultimate strength of ship hulls under torsion

For a ship hull with large deck openings such as container vessels and some large bulk carriers, the analysis of warping stresses and hatch opening deformations is an essential part of ship structural analyses. It is thus of importance to better understand the ultimate torsional strength characteristics of ships with large hatch openings. The primary aim of the present study is to investigate the ultimate strength characteristics of ship hulls with large hatch openings under torsion. Axial (warping) as well as shear stresses are normally developed for thin-walled beams with open cross sections subjected to torsion. A procedure for calculating these stresses is briefly described. As an illustrative example, the distribution and magnitude of warping and shear stresses for a typical container vessel hull cross section under unit torsion is calculated by the procedure. By theoretical and numerical analyses, it is shown that the influence of torsion induced warping stresses on the ultimate hull girder bending strength is small for ductile hull materials while torsion induced shear stresses will of course reduce the ship hull ultimate bending moment.     

A Preliminary Study of Shear Wave in Seafloor Surface Sediments

This article preliminarily reports and analyses the transmission characteristics and behaviors of shear wave in the offshore seafloor surface sediments in China, discusses the relationships between the physical and mechanical features of the shear wave and the compression wave, and compares the testing results with that of Hamilton and Chen et al. The result shows that the shear wave can be tested if the seafloor surface sediment has tangent modulus. The shear wave velocity ranges from 50-600 m/s and the measuring frequency from 50-200 kHz. The sound velocity rate of shear wave and compression wave can be used to appraise the stress-strain feature of seafloor surface sediments. This study provides a basis for further describing and appraising the seafloor sedimentary acoustic-mechanical feature and building a geological-acoustic model on China's offshore sea area.     

0220号热带风暴(米克拉)特征分析

南海是热带气旋活动较为频繁的地区之一。该地区因其独特的地理环境和复杂的热带大气环流系统，在热带气旋预报工作上存在一定的困难。本文在分析一些气象图表资料的基础上，对2002年第20号热带风暴(米克拉)的形成、发展及消亡进行了探讨和研究。主要从形成的背景环流，气旋的结构等方面入手，总结出一些该气旋所具备韵特有流场，从而为以后的南海自生热带气旋预报工作积累一定经验。     

海底浅层介质切变波的初步研究

初步分析了中国沿海海底浅层介质切变波的传播特性,讨论了多种海底浅层介质切变波与压缩波、物理力学性质之间的关系,并与Hamilton和Chen等人的结果进行了比较。认为海底浅层介质存在切变模量,切变波可以被测量出来,切变波速为50—600m·s-1,测量频率在50—200kHz之间,用波速比可以评价海底浅层介质的应力 应变性质。研究工作有助于描述和评价中国沿海海底浅层介质声学物理性状,并为最终建立中国沿海海底地声模型提供依据。     

Equilibrium constants of triethanolamine in major seawater salts

Acid–base equilibrium constants of triethanolamine (TEA) have been determined by potentiometric titrations with a glass electrode, at 25 °C. Ionic strength was kept constant with only one electrolyte (using one of these salts: NaCl, KCl, MgCl₂ or CaCl₂), with binary mixtures of MgCl₂ and CaCl₂, and finally, in a solution with a composition approximately similar to that of natural seawater without sulfate. Equilibrium constants have been expressed in function of ionic strength by means of Pitzer equations and interaction parameters proposed in this theory have been obtained. It has been found that acid–base behaviour of TEA depends greatly on the salt used: basicity of TEA is decreased by CaCl₂, while it is increased by the other electrolytes used in this work.