On the stability of stratified plane couette flow

Abstract

Unbounded stratified plane Couette flow is shown to be stable against small amplitude disturbances. The Brunt-Väisälä frequency is assumed to be constant. Both viscosity and thermal diffusion are included, and shown to be stabilizing.     

Coupled finite‐element simulation of injection well testing in unconsolidated oil sands reservoir

This paper presents a finite‐element (FE) model for simulating injection well testing in unconsolidated oil sands reservoir. In injection well testing, the bottom‐hole pressure (BHP) is monitored during the injection and shut‐in period. The flow characteristics of a reservoir can be determined from transient BHP data using conventional reservoir or well‐testing analysis. However, conventional reservoir or well‐testing analysis does not consider geomechanics coupling effects. This simplified assumption has limitations when applied to unconsolidated (uncemented) oil sands reservoirs because oil sands deform and dilate subjected to pressure variation. In addition, hydraulic fracturing may occur in unconsolidated oil sands when high water injection rate is used. This research is motivated in numerical modeling of injection well testing in unconsolidated oil sands reservoir considering the geomechanics coupling effects including hydraulic fracturing. To simulate the strong anisotropy in mechanical and hydraulic behaviour of unconsolidated oil sands induced by fluid injection in injection well testing, a nonlinear stress‐dependent poro‐elasto‐plastic constitutive model together with a strain‐induced anisotropic permeability model are formulated and implemented into a 3D FE simulator. The 3D FE model is used to history match the BHP response measured from an injection well in an oil sands reservoir. Copyright © 2013 John Wiley & Sons, Ltd.     

Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.     

Garnet crystal plasticity in the continental crust,new example from south Madagascar

Garnet (10 vol.%; pyrope contents 34–44 mol.%) hosted in quartzofeldspathic rocks within a large vertical shear zone of south Madagascar shows a strong grain‐size reduction (from a few cm to ～300 μm). Electron back‐scattered diffraction, transmission electron microscopy and scanning electron microscope imaging coupled with quantitative analysis of digitized images (PolyLX software) have been used in order to understand the deformation mechanisms associated with this grain‐size evolution. The garnet grain‐size reduction trend has been summarized in a typological evolution (from Type I to Type IV). Type I, the original porphyroblasts, form cm‐sized elongated grains that crystallized upon multiple nucleation and coalescence following biotite breakdown: biotite + sillimanite + quartz = garnet + alkali feldspar + rutile + melt. These large garnet grains contain quartz ribbons and sillimanite inclusions. Type I garnet is sheared along preferential planes (sillimanite layers, quartz ribbons and/or suitably oriented garnet crystallographic planes) producing highly elongated Type II garnet grains marked by a single crystallographic orientation. Further deformation leads to the development of a crystallographic misorientation, subgrains and new grains resulting in Type III garnet. Associated grain‐size reduction occurs via subgrain rotation recrystallization accompanied by fast diffusion‐assisted dislocation glide. This plastic deformation of garnet is associated with efficient recovery as shown by the very low dislocation densities (10¹⁰ m^?3 or lower). The rounded Type III garnet experiences rigid body rotation in fine‐grained matrix. In the highly deformed samples, the deformation mechanisms in garnet are grain‐size‐ and shape‐dependent: dislocation creep is dominant for the few large grains left (>1 mm; Type II garnet), rigid body rotation is typical for the smaller rounded grains (300 μm or less; Type III garnet) whereas diffusion creep may affect more elliptic garnet (Type IV garnet). The P–T conditions of garnet plasticity in the continental crust (≥950 °C; 11 kbar) have been identified using two‐feldspar thermometry and GASP conventional barometry. The garnet microstructural and deformation mechanisms evolution, coupled with grain‐size decrease in a fine‐grained steady‐state microstructure of quartz, alkali feldspar and plagioclase, suggests a separate mechanical evolution of garnet with respect to felsic minerals within the shear zone.     

A mixing-length model for predicting vertical velocity distribution in flows through emergent vegetation

Abstract

The vertical profiles of streamwise velocities are computed on flood plains vegetated with trees. The calculations were made based on a newly developed one-dimensional model, taking into account the relevant forces acting on the volumetric element surrounding the considered vegetation elements. A modified mixing length concept was used in the model. An important by-product of the model is the method for evaluating the friction velocities, and consequently bed shear stresses, in a vegetated channel. The model results were compared with the relevant experimental results obtained in a laboratory flume in which flood plains were covered by simulated vegetation.     

宽窄相间河道水流紊动特性试验研究

为了探索宽窄相间河道的水流紊动特性，以西南地区宝兴河上游宽窄相间河段为研究对象，基于室内概化模型试验，采用多普勒声学流速仪（ADV）测量了室内模型典型断面上的三维瞬时流速，分析典型断面上的纵向时均流速、紊动强度、雷诺切应力和紊动能的分布规律。试验结果显示：宽窄相间水槽中，扩散段边壁的紊动强度大于中心区域的紊动强度，最大值位于0.2倍水深处；扩散段两侧坡脚处紊动能最大；侧壁区的平面和立面雷诺切应力最大值出现在扩散段内，中心区域最大雷诺切应力位于两槽间的中间断面处；扩散段内水流紊乱，两侧出现旋涡和涡脱，易造成侧壁侵蚀加强，引起河道拓宽。深入分析了宽窄相间河道水流的紊动特性，可为山区河流治理和自然灾害防治提供参考。     

红砂岩修筑浆砌石坝的岩土工程研究

红砂岩为中低强度岩层、岩相复杂多变,较易风化、软化。本文通过工程实践阐述了在红砂岩分布地区利用当地材料建造浆砌块石坝的岩土工程研究,开创了红砂岩筑坝的先例。     

Behaviour of abandoned room and pillar mines in Illinois

Summary Little comprehensive information has been reported on the behaviour of room-and-pillar mines. The objective of this paper is to present case data on mine failures in the Illinois basin for use in practice. Presented are results of an ongoing study and details on the site characteristics of cases where sags have developed on the surface. Site data are reported to show the geologic, mining, and sag conditions that existed. Sags mainly develop from pillar, floor, or pillar-floor failure. The character of the sags depends upon the type of mine failure as well as the overburden response.Preliminary results show that the statistical no-risk tributary pressure decreases over 300% as the mine age increases from about 2 to 100 years at a long-term value of approximately 300 psi (2070 kPa). As more information is collected and more analysis is done, the allowable tributary pressure can be determined for different site conditions.A plot is also reported that depicts the relationship of the maximum subsidence to site conditions. It was found that the modified subsidence factor was heavily dependent upon the overburden rock thickness.     

大别变质地体的构造样式及变形序列

大别山区晚太古代大别群变质岩系,经历了复杂的变形过程。在大别变质地块内部识别出两套大型剪切带,它们在该区构造格架形成过程中起着重要的作用。本文还分析了变质的上壳岩、片麻岩和剪切带内的变形特点。实际资料说明,剪切带内的褶皱是由于剪切的不稳定性及平行面理局部缩短形成的,这些大型地壳剪切作用多伴随有挤压流动或伸展流动。根据褶皱叠加关系以及剪切带、新成体交切关系建立了大别群总体构造序列。该区提供了一个研究中下地壳作用的窗口。     

Correlation between point load index and compressive strength for quartzite rocks

Summary The relationship of the point load test with uniaxial compressive strength was examined using quartzite rocks to substantiate the existing correlations.