Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.     

Jurassic Dextral and Cretaceous Sinistral Movements Along the Hida Marginal Belt

The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

Contrasting metamorphic evolution of metasedimentary rocks from the Çine and Selimiye nappes in the Anatolide belt, western Turkey

Abstract P–T conditions, mineral isograds, the relation of the latter to foliation planes and kinematic indicators are used to elucidate the tectonic nature and evolution of a shear zone in an orogen exhumed from mid‐crustal depths in western Turkey. Furthermore, we discuss whether simple monometamorphic fabrics of rock units from different nappes result from one single orogeny or are related to different orogenies. Metasedimentary rocks from the Çine and Selimiye nappes at the southern rim of the Anatolide belt of western Turkey record different metamorphic evolutions. The Eocene Selimiye shear zone separates both nappes. Metasedimentary rocks from the Çine nappe underneath the Selimiye shear zone record maximum P–T conditions of about 7 kbar and >550 °C. Metasedimentary rocks from the overlying Selimiye nappe have maximum P–T conditions of 4 kbar and c. 525 °C near the base of the nappe. Kinematic indicators in both nappes are related to movement on the Selimiye shear zone and consistently show a top‐S shear sense. Metamorphic grade in the Selimiye nappe decreases structurally upwards as indicated by mineral isograds defining the garnet‐chlorite zone at the base, the chloritoid‐biotite zone and the biotite‐chlorite zone at the top of the nappe. The mineral isograds in the Selimiye nappe run parallel to the regional S_R foliation, parallel the Selimiye shear zone and indicate that the Selimiye shear zone formed during this prograde greenschist to lower amphibolite facies metamorphic event but remained active after the peak of metamorphism. ⁴⁰Ar/³⁹Ar mica ages and the tectonometamorphic relationship with the Eocene Cyclades–Menderes thrust, which occurs above the Selimiye nappe in the study area, suggests an Eocene age of metamorphism in the Selimiye nappe. Metasedimentary rocks of the Çine nappe 20–30 km north of the Selimiye shear zone record maximum P–T conditions of 8–11 kbar and 600–650 °C. An age of about 550 Ma is indicated for amphibolite facies metamorphism and associated top‐N shear in the orthogneiss of the Çine nappe. Our study shows that simple monophase tectonometamorphic fabrics do not always indicate a simple orogenic development of a nappe stack. Preservation in some areas and complete overprinting of those fabrics in other areas apparently occur very heterogeneously.     

闪长岩强风化带做高层建筑天然地基的可行性研究

借助于中国工商银行山东省分行营业办公楼的工程实践,将常规勘察与原位测试相结合,运用野外钻探、室内试验、原位测试多种手段,对闪长岩强风化带的物理力学性质进行了测试分析和深入地研究,并通过对承载力、沉降变形的验算,得出其作为高层建筑的天然地基是可行的。实践证明,与桩基础处理方案相比,节省资金近200万元,大大加快了施工进度,减少了基础施工难度,取得了巨大的经济效益与社会效益;同时,也提出了研究岩石风化带所遇到的问题:由于采取原状试样及制样难,导致对其物理力学性质了解不够。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

淮安市典型土动力特性的试验研究

通过对淮安市典型的全新世沉积粉土和粘性土进行室内自振柱试验及粉土的动三轴液化试验，把粉土和粘性土的自振柱试验结果与Seed和Idriss建议的砂土及饱和粘土的剪切模量比G／Gmax-γ曲线和阻尼比λ-γ曲线的变化范围进行对比，结果表明：粉土的剪模量比要比饱和粘土的大，而比砂土的剪模量比要小，其阻尼比接近于砂土的阻尼比；粘性土的剪模量比要比一般饱和粘土的大，而与砂土的剪模量比相近，其阻尼比要比砂土的略低；粉土的抗液化强度与液化振次之间的关系可以用指数函数来表示，其振动孔隙水压力的发展规律可以用反正弦三角函数拟合；粘粒含量是影响淮安市全新世沉积粉土抗液化强度的主要影响因素。