1∶10000图库一体化数据的质量控制

根据1∶10 000图库一体化数据成果,对图库一体化数据生产过程中各个环节的质量控制进行探讨,提出了一体化数据的质量控制方法。     

多光谱遥感影像亮度空间相位一致性特征点检测

提出了一种基于亮度空间和相位一致性理论的多光谱遥感影像特征点检测算法。首先利用参数自适应的灰度变换函数建立影像亮度空间;然后结合相位一致性方法在影像亮度空间进行候选特征点检测,并将候选特征点映射到原始影像上进行非极大值抑制;最后在尺度空间计算特征点的特征尺度值。本文方法有效结合了亮度空间特征检测和相位一致性特征检测的优势,对多光谱遥感影像的辐射变化具有较强的稳健性。试验结果证明,与传统特征点检测算法相比,本文方法在特征重复率和重复特征数量方面都具有明显的优势。     

论光电测距仪的周期误差和相位不均匀性误差

论述了测距仪周期误差及相位不均匀性误差的性质,分析了这些误差对距离测量的影响,给出了实验结果,提出了改进有关误差检定的建议。     

The Coarse-Grained Lacustrine Slope Apron Deposits in the Moliqing Area, Yitong Basin, Northeast China

Overlapping gravity accumulation bodies were formed on the northwestern steep slope of the Shuangyang Formation in the Moliqing fault depression of northeast China. This study analyzed in detail the spatial distribution of the lithofacies and lithofacies associations of these accumulation bodies based on more than 600 m of core sections, and summarized 12 major types of lithofacies and three types of lithofacies associations: (1) the proximal zone consists of gravelly debris flows dominated by alluvial channel conglomerates; (2) the middle zone is dominated by various gravity flow deposits and traction flow deposits; and (3) the distal zone is dominated by mudstones with intercalations of sandy debris and turbidites. Combining with the grain size cumulative probability curves analysis, we determined the transformation of debris flows to sandy debris flows and to turbidity currents in the slope zone of the basin margin, and further proposed a lacustrine slope apron model that is characterized by (1) an inconstant multiple source (line source), (2) an alternation of gravity flow deposits and traction flow deposits dominated by periodical changes in a source flood flow system, and (3) the transformation of sandy debris flow deposits into distal turbidity current deposits. This sedimentary model may be applicable to other fault depressions for predicting reservoir distribution.     

粉煤灰制备硫铝酸钙-阿利特水泥熟料的研究

以粉煤灰为主要原料, CaF2为矿化剂,设计MG和MS值,控制CaO和CaSO4含量,分别在1 150、1 200、1 250、1 300和1 350℃温度下烧制高胶凝性硫铝酸钙-阿利特复合矿相水泥熟料.运用X射线粉晶衍射(XRD)和扫描电镜(SEM)等手段,研究原料配方和煅烧温度对熟料物相组成的影响,对熟料物相形成的反应历程作了探讨.实验结果表明,在1-300℃,当MG=1.05、MS =0.95时,形成较理想的熟料,物相组成约为C4A3-S 58.73%,C3S 23.99%,C2S 2.87%,C11A7·CaF2/C12A7 14.07 %,f-CaO 0.35%.熟料中主要物相硫铝酸钙晶体呈菱形十二面体,发育完整,形态规则,颗粒大小约为1～3 μm;阿利特(C3S)相物相为板状六角形,晶体发育相对细小.     

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.     

The Geothermal Study of the Mid-Segment of the Tancheng-Lujiang Fault Zone and Its Neighboring Region

In this paper,25 new terrestrial heat flow values newly observed along the mid-segment of the Tancheng-Lujiang fault zone are listed.With these geothermal data and 37 other terrestrial heat flow values(previously published),we describe the distribution features of terrestrial heat flows in the area.In this research,the two-dimensional temperature structure from the surface to lithospheric bottom of the Huaibei-Sixian-Jinhu profile is inferred by using the finite-element method and the temperature and heat flow of sedimentary,granitic,and basaltic layers is calculated.     

基岩弯曲河段洪水水流结构的试验研究

低坡度基岩弯曲河流在地质构造控制区域广泛存在（床面坡度小于5‰）,洪水对基岩弯曲河流的河床淤积与侵蚀具有较大影响,但以往研究对基岩弯曲河流的洪水动力结构认识不足。通过几何概化基岩弯曲河段,考虑Froude相似与边壁粗糙,建立基岩弯曲河道概化模型,分析洪水下的弯道水面线分布、时均流场与湍流结构特性。结果表明:在洪水流量下,弯顶上游出现最小水面横比降、凸岸水流分离、凹岸双环流发育、流速下潜且二次环流强度达到最大,在弯顶下游水面横比降达到最大并出现环流分裂;床面切应力分布于凸岸水流分离以及弯顶上游中心区域,横向动量输移集中于弯顶上游。试验结果为基岩弯曲河道中的床面侵蚀与沿程淤积提供了水动力方面的解释。     

Hydrologic response of engineered media in living roofs and bioretention to large rainfalls: experiments and modeling

The hydrologic response of engineered media plays an important role in determining a stormwater control measure's ability to reduce runoff volume, flow rate, timing, and pollutant loads. Five engineered media, typical of living roof and bioretention stormwater control measures, were investigated in laboratory column experiments for their hydrologic responses to steady, large inflow rates. The inflow, medium water content response, and outflow were all measured. The water flow mechanism (uniform flow vs. preferential flow) was investigated by analyzing medium water content response in terms of timing, magnitude, and sequence with depth. Modeling the hydrologic process was conducted in the HYDRUS‐1D software, applying the Richards equation for uniform flow modeling, and a mobile–immobile model for preferential flow modeling. Uniform flow existed in most cases, including all initially dry living roof media with bimodal pore size distributions and one bioretention medium with unimodal pore size distribution. The Richards equation can predict the outflow hydrograph reasonably well for uniform flow conditions when medium hydraulic properties are adequately represented by appropriate functions. Preferential flow was found in two media with bimodal pore size distributions. The occurrence of preferential flow is more likely due to the interaction between the bimodal pore structure and the initial water content rather than the large inflow rate.     

Flow resistance adjustments of channel and bars in the middle reaches of the Yangtze River in response to the operation of the Three Gorges Dam

Journal of Geographical Sciences - Since the Three Gorges Dam (TGD) was put into operation, the flood water level at an identical discharge rate has not displayed a decreasing trend along the...