Effects of magnitude accuracy and complete－ness data on seismic hazard parameters

Ｅｆｆｅｃｔｓｏｆｍａｇｎｉｔｕｄｅａｃｃｕｒａｃｙａｎｄｃｏｍｐｌｅｔｅ┐ｎｅｓｄａｔａｏｎｓｅｉｓｍｉｃｈａｚａｒｄｐａｒａｍｅｔｅｒｓＨＵＩ－ＣＨＥＮＧＳＨＡＯ（邵辉成），ＪＩＡ－ＳＨＵＸＩＥ（谢家树），ＰＩＮＧＷＡＮＧ（王平）ａｎｄＹＡ－Ｘ...     

降雨对地电阻率干扰的分析

在一些地电阻率观测台站受本身台址条件的限制，观测深度较浅，因此，观测值受到降雨等气象因素的影响。本文选取昌黎台ＥＷ向１９８３－１９９４年观测资料月均值，用褶积滤波和多元回归方法对ρｓ进行了降雨校正，将将之作为一个灰箱系统，将资料外推至１９９５４上，然后与原始观测值作残差分析，取得了一定效果。     

动态空区法在永登5.8级地震回顾性预报中的应用

研究了永登５．８级地震前地震活动异常特征，并应用秦保燕提出的地震动态空区的原理和地震频次起伏加剧，研究了１９９５年永登５．８级地震的孕震过程，对地震三要素进行了回顾性预报。结果表明，预测结果与实际地震发生的时间、强度和地点十分接近     

探矿巷道通风系统设计的灰色决策

本文简述了灰色决策方法，建立了局部通风设计的灰色决策模型，获得了可应用于施工现场的设计结果     

土压力问题的变分解答

用变分学方法导出了与朗肯土压力公式和库伦土压力公式完全一致的土压力计算公式，并且一般情况下的极值曲线线不同一条直线，而是比较复杂的曲线，在 倾斜边坡情况下的伦公式仅仅是一个特解。     

用地层倾角测井资料解释复杂构造的方法

倾角测井矢量图可以标示出井眼范围内各深度点的地层产状，一定的地层构造形态在矢量图上有一定的倾角矢量组合模式。通过正演计算，总结出了１９种褶曲和断层等构造组合模式的样板及在一口井内各构造模式间的“串”、“缺”、“嵌”连接规律。对照组合模式样板进行矢量组合模式识别，采用“倾角矢量逐点叠加法”，可把井眼范围纵向排列的倾角矢量转换成任意方位的地层视产状，绘制构造剖面图。用多个剖面的地层空间坐标数据可绘制倾角构造平面图，确定钻遇构造的形态。据此原理，编制了一套倾角测井构造解释软件系统。     

EVALUATION OF MODELS FOR ESTIMATION OF NET RADIATION FOR ALPINE SLOPING SURFACES

This paper describes and tests two models for estimating net radiation(or the radiation balance)on sloping surfacesof alpine environments.They are an empirical method based on the linear relationship between net radiation and globalsolar radiation and a flux-by-flux method involving the estimation of all the individual components of radiation budgetindependently.The results show that the empirical method is capable of predicting hourly net radiation on sloping sur-faces to within about±53 W m~(-2) under all sky conditions.During clear sky conditions,it could predict net radiation onslopes to within±58 W m~(-2) or 16% of the measured values.The flux-by-flux method,although it did not perform aswell as the empirical method,performed adequately and could give estimates of net radiation on slopes with root meansquare error of less than 74 W m~(-2)(20%)and a mean bias error of 27 W m~(-2)(7%).     

计算伸展断层底界面深度的作图法简介

本文简介了计算正断层底界滑脱面深度的3种几何作图法。其中,M.W.Kilsdonk(1989)在Davison(1985)方法基础上作出的修正方法,简便且较准确。运用这种方法计算的鲁西地区深层次滑脱面深度与壳内低速层深度吻合。     

A discussion on the amplitude ratios of PP and P waves for earthquakes with different focal mechanisms

Using the WKBJ approximation method we calculate the synthetic teleseismograms of P and PP waves to match the observed ones of six large Chinese earthquakes with known focal mechanisms: Tibet earthquake of July 14, 1973; Haicheng earthquake of February 4, 1975; Songpan earthquakes of August 16, 1976, August 21, 1976 and August 23, 1976 and Nignhe earthquake of November 15, 1976. The focal mechanism of the Tibet earthquake is discussed to examine the technique used in the calculation. We note that the amplitude ratios of PP and P waves (A _PP/A _P) have different characteristics for dip—slip events and strike—slip events within certain epicentral distances. We calculate the synthetic teleseismograms of P and PP waves for the strike—slip and dip—slip events with fault angles of 330°, 240° and 0°, focal depths of 8 km, 17 km and 24 km, at the assumed station with an azimuth of 310° and epicentral distances from 40°; to 80°. The diagrams of maximum amplitude ratios of PP and P waves (A _PP/A _P) versus distances are given. The possibility to use the (A _PP/A _P) values to give an approximate estimation for the focal mechanism type is discussed. This work may be useful for determining the focal mechanism type for those earthquakes which have only few records such as the Chinese earthquakes from the 1930s to 1960s. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 150–160, 1991.     

松潘地区岩金统计成矿予测中泛克立格法的应用

川西北地区是国内重要的岩金普查靶区。本文对松潘地区的地质特征,泛克立格法原理,及在本区的应用情况作了介绍,对主要计算步骤,给出基本结果,对计算获得的有意义异常区,进行地质解释,并将此方法与趋势面分析进行对比。