H020U井钻进所遇问题及处理方法

土耳其贝帕扎里天然碱矿H020U井在造斜钻进和水平钻进过程中遇到井漏、钻头钻遇硅化灰岩层磨损严重、未绕过第一靶点V020而打中套管、井涌、仪器掉入裸眼、钻遇未知溶腔导致顶角下降,方位偏离而导致未直接连通第二靶点等问题。针对这些问题进行了分析,并提出了相应的处理方法,最后成功地使H020U井连通第一靶点V020井和第二靶点V020U井。     

Tree-ring reconstructions of May–June precipitation for western Anatolia

In this study, we aim to examine past dry and wet events for the western Anatolia, performing local and spatial reconstructions. 17 new black pine site chronologies were developed, May–June precipitation time series were reconstructed for four localities, and the first spatial May–June precipitation reconstruction was achieved for western Anatolia. The long-term local May–June precipitation reconstructions contain mostly one-year and, less commonly, two-year drought events. The longest consecutive dry period (AD 1925–1928) in the reconstructed time series for Kütahya lasted four years. Spatial reconstructions revealed that between AD 1786 and 1930 the extreme dry years for all of western Anatolia were AD 1887, 1893, 1794 and 1740. The driest year during the 215-year-long period under consideration was 1887. The wettest years for the entire western Anatolia were determined to be AD 1835, 1876, 1881 and 1901. There is a big overlap between agricultural famine years and dry years as determined from reconstructions. In this context, our study provides a basis for understanding agricultural drought and better management of regional water resources.     

Palaeomagnetic investigation of Cenozoic volcanic rocks bordering the North Anatolian Fault Zone,Reşadiye and Koyulhisar Districts,central-east Anatolia,Turkey

A palaeomagnetic study is reported from the lavas of Eocene, Miocene and Pliocene age cropping out immediately to the north of the North Anatolian Fault Zone (NAFZ) in the Re?adiye–Mesudiye region of central-eastern Anatolia. Rock magnetic investigations identify a high percentage of multi-domained magnetite as the dominant ferromagnet in these rocks and this probably accounts for a relatively poor response to alternating field and thermal demagnetisation. Thirty of 37 units yielded acceptable groupings of characteristic magnetisation directions. An earlier study indicated small anticlockwise crustal block rotation in this region since Upper Cretaceous times (D/I?=?347/50°), and our study indicates that this was overtaken by clockwise rotation in Eocene times (D/I?=?40/47°), although sample size control from the Palaeogene is poor. Results from later Miocene (D/I?=?2/62°) and Pliocene (D/I?=?0/53°) volcanic rocks indicate that no significant tectonic rotation has occurred in the north of the NAFZ in Neogene times. This contrasts with rotations in the weaker crust comprising the Anatolian collage south of the NAFZ, where differential and sometimes large anticlockwise rotations occurred during the latter part of the Neogene.     

Neotectonic and volcanic characteristics of the Karasu fault zone (Anatolia,Turkey): The transition zone between the Dead Sea transform and the East Anatolian fault zone

Abstract

The Karasu Rift (Antakya province, SE Turkey) has developed between east-dipping, NNE-striking faults of the Karasu fault zone, which define the western margin of the rift and westdipping, N-S to N20°-30°E-striking faults of Dead Sea Transform fault zone (DST) in the central part and eastern margin of the rift. The strand of the Karasu fault zone that bounds the basin from west forms a linkage zone between the DST and the East Anatolian fault zone (EAFZ). The greater vertical offset on the western margin faults relative to the eastern ones indicates asymmetrical evolution of the rift as implied by the higher escarpments and accumulation of extensive, thick alluvial fans on the western margins of the rift. The thickness of the Quaternary sedimentary fill is more than 465 m, with clastic sediments intercalated with basaltic lavas. The Quaternary alkali basaltic volcanism accompanied fluvial to lacustrine sedimentation between 1.57 ± 0.08 and 0.05 ± 0.03 Ma. The faults are left-lateral oblique-slip faults as indicated by left-stepping faulting patterns, slip-lineation data and left-laterally offset lava flows and stream channels along the Karasu fault zone. At Hacilar village, an offset lava flow, dated to 0.08 ± 0.06 Ma, indicates a rate of leftlateral oblique slip of approximately 4.1 mm?year^?1. Overall, the Karasu Rift is an asymmetrical transtensional basin, which has developed between seismically active splays of the left-lateral DST and the left-lateral oblique-slip Karasu fault zone during the neotectonic period. © 2001 Éditions scientifiques et médicales Elsevier SAS     

Frasnian rugose and tabulate corals from the eastern Taurus (Kozan region,Turkey)

A section near the Kilgen Lake (Adana Province) has yielded a fauna of rugose and tabulate corals including Disphyllum cf. rugosum (Wedekind, 1922), D. cf. curtum Hill, 1954, Wapitiphyllum sp., Thamnopora sp., and Alveolites sp. This coral assemblage is consistent with the previous Frasnian age assigned to the limestones of the Gümü?ali Formation. The rather well-preserved material provides new data on the structure and microstructure of Disphyllum and allows to describe in Thamnopora unusual calicinal morphology (septal ridges, median teeth, and pseudopercula) as well as new structures linked to the lateral increase (basal low wall, apical cul-de-sac).     

Constraints on the timing and regional conditions at the start of the present phase of crustal extension in western Turkey,from observations in and around the Denizli region

The chronology of extension of the continental crust in western Turkey has been the subject of major controversies. We suggest that these difficulties have arisen in part because of past misuse of dating evidence; and in part because the assumption often made, that deposition of major terrestrial sedimentary sequences implies crustal extension to create the necessary accommodation space, is incorrect. We report evidence that the present phase of extension began in the Denizli region at ~ 7 Ma, around the start of the Messinian stage of the Late Miocene. This timing matches the estimated start of right-lateral slip on the North Anatolian Fault Zone, and corresponds to a substantial increase in the dimensions of the Aegean extensional province to roughly its present size: beforehand, between ~ 12 Ma and ~ 7 Ma, extension seems to have only occurred in the central part of this modern province. In some localities, terrestrial sedimentation that began before this start of extension continued into this extensional phase, both within and outside normal fault zones. However, in other localities within the hanging-walls of normal faults, the start of extension marked the end of sedimentation. Relationships between sedimentation and crustal extension in this region are thus not straightforward, and a simple correlation should therefore not be assumed in structural interpretations. During the time-scale of this phase of extension, the Denizli region has also experienced major vertical crustal motions that are unrelated to this extension. The northern part of this region, in the relatively arid interior of western Turkey, has uplifted by ~ 400 m since the Middle Pliocene, whereas its southern part, closer to the Mediterranean Sea and with a much wetter climate, has uplifted by ~ 1,200 m since the Early Miocene, by up to ~ 900 m since the Middle Pliocene, and by an estimated ~ 300 m since the Early Pleistocene. This regional uplift, superimposed on the local effects of active normal faulting, is interpreted as a consequence of lateral variations in rates of erosion. A reliable chronology for this phase of extension in western Turkey, in relation to changes in the geometry of motions of adjoining plates and Late Cenozoic environmental change, is now in place.     

Oligo-Miocene extension in the Lycian orogen: evidence from the Lycian molasse basin,SW Turkey

The Lycian molasse basin of SW Turkey is a NE-SW-oriented basin that developed on an imbricated basement, comprising the allochthonous Mesozoic rocks of the Lycian nappes and Palaeocene-Eocene supra-allochthonous sediments. The imbricated basement has resulted from a complex history related to the emplacement of different tectonic units from Late Cretaceous to Late Eocene. Following imbrication, extensional collapse of the Lycian orogen resulted in extensive emergent areas, some of which coincide with present-day mountains. These were surrounded by interconnected depressions, namely, the Kale-Tavas, Çardak-Dazk?r? and Denizli subbasins.

The Lycian molasse sequence contains a relatively complete record of the tectonic history of the Lycian orogenic collapse from which it was derived. The sequence is characterised by interdependence between tectonism and sedimentation, the latter of which includes fining-and coarsening-upward sedimentary cycles with syn-depositional intrabasinal unconformities.

The Denizli subbasin consists of thick, coarse-grained wedges of alluvial fans and fine-grained fan-delta deposits formed in a shallowmarine environment. Some areas of the fan deltas were colonised by corals, red algae and foraminifera, forming patch reefs.

The first phase of extensional collapse in the region is marked by the Lycian orogenic collapse, which may have been initiated by the beginning of the Oligocene (Rupelian), following the main Menderes metamorphism. Starting in the latest Early Miocene or in the Middle Miocene, the area of the molasse basin was subject to deformation with the Lycian nappes, and to erosion as well. At that time, the Lycian nappes, with some ophiolitic assemblages, were thrust over the molasse deposits and thus, NE-SW-trending folds were formed. The molasse deposits and thrust-related deformational structures were then unconformably covered by Upper Miocene continental deposits which belong to the neotectonic period of SW Turkey. The second phase of extensional collapse is marked by granitic intrusions and the formation of Miocene detachment-related extensional basins. This phase may have been related to the exhumation of the gneissic core of the Menderes Massif, from which fragments were derived and incorporated into the upper parts of the Denizli subbasin during the Aquitanian.     

Subduction,ophiolite genesis and collision history of Tethys adjacent to the Eurasian continental margin: new evidence from the Eastern Pontides,Turkey

This paper presents several types of new information including U–Pb radiometric dating of ophiolitic rocks and an intrusive granite, micropalaeontological dating of siliceous and calcareous sedimentary rocks, together with sedimentological, petrographic and structural data. The new information is synthesised with existing results from the study area and adjacent regions (Central Pontides and Lesser Caucasus) to produce a new tectonic model for the Mesozoic–Cenozoic tectonic development of this key Tethyan suture zone.

The Tethyan suture zone in NE Turkey (Ankara–Erzincan–Kars suture zone) exemplifies stages in the subduction, suturing and post-collisional deformation of a Mesozoic ocean basin that existed between the Eurasian (Pontide) and Gondwanan (Tauride) continents. Ophiolitic rocks, both as intact and as dismembered sequences, together with an intrusive granite (tonalite), formed during the Early Jurassic in a supra-subduction zone (SSZ) setting within the ?zmir–Ankara–Erzincan ocean. Basalts also occur as blocks and dismembered thrust sheets within Cretaceous accretionary melange. During the Early Jurassic, these basalts erupted in both a SSZ-type setting and in an intra-plate (seamount-type) setting. The volcanic-sedimentary melange accreted in an open-ocean setting in response to Cretaceous northward subduction beneath a backstop made up of Early Jurassic forearc ophiolitic crust. The Early Jurassic SSZ basalts in the melange were later detached from the overriding Early Jurassic ophiolitic crust.

Sedimentary melange (debris-flow deposits) locally includes ophiolitic extrusive rocks of boninitic composition that were metamorphosed under high-pressure low-temperature conditions. Slices of mainly Cretaceous clastic sedimentary rocks within the suture zone are interpreted as a deformed forearc basin that bordered the Eurasian active margin. The basin received a copious supply of sediments derived from Late Cretaceous arc volcanism together with input of ophiolitic detritus from accreted oceanic crust.

Accretionary melange was emplaced southwards onto the leading edge of the Tauride continent (Munzur Massif) during latest Cretaceous time. Accretionary melange was also emplaced northwards over the collapsed southern edge of the Eurasian continental margin (continental backstop) during the latest Cretaceous. Sedimentation persisted into the Early Eocene in more northerly areas of the Eurasian margin.

Collision of the Tauride and Eurasian continents took place progressively during latest Late Palaeocene–Early Eocene. The Jurassic SSZ ophiolites and the Cretaceous accretionary melange finally docked with the Eurasian margin. Coarse clastic sediments were shed from the uplifted Eurasian margin and infilled a narrow peripheral basin. Gravity flows accumulated in thrust-top piggyback basins above accretionary melange and dismembered ophiolites and also in a post-collisional peripheral basin above Eurasian crust. Thickening of the accretionary wedge triggered large-scale out-of-sequence thrusting and re-thrusting of continental margin and ophiolitic units. Collision culminated in detachment and northward thrusting on a regional scale.

Collisional deformation of the suture zone ended prior to the Mid-Eocene (~45?Ma) when the Eurasian margin was transgressed by non-marine and/or shallow-marine sediments. The foreland became volcanically active and subsided strongly during Mid-Eocene, possibly related to post-collisional slab rollback and/or delamination. The present structure and morphology of the suture zone was strongly influenced by several phases of mostly S-directed suture zone tightening (Late Eocene; pre-Pliocene), possible slab break-off and right-lateral strike-slip along the North Anatolian Transform Fault.

In the wider regional context, a double subduction zone model is preferred, in which northward subduction was active during the Jurassic and Cretaceous, both within the Tethyan ocean and bordering the Eurasian continental margin.     

Evolution of the Large-scale Active Manisa Fault,Southwest Turkey: Implications on Fault Development and Regional Tectonics

This paper aims to illustrate and discuss mechanism(s) responsible for the growth and evolution of large-scale corrugated normal faults in southwest Turkey. We report spectacular exposures of normal fault surfaces as parts of the Manisa Fault - a ?50-km-long northeast-ward arched active fault that defines the northwestern edge of the Manisa graben, which is subsidiary to the Gediz Graben. The fault is a single through-going corrugated fault system with distinct along-strike bends. It follows NW direction for 15 km in the south, then bends into an approximately E-W direction in the northwest. The fault trace occurs at the base of topographic scarps and separates the Quaternary limestone scree and alluvium from the highly strained, massive bed-rock carbonates. The fault is exposed on continuous pristine slip surfaces, up to 60 m high. The observed surfaces are polished and ornamented by well-preserved various brittle structural features, such as slip-parallel striations, gutters and tool tracks, and numerous closely spaced extension fractures with straight or crescentic traces. The rocks both in the footwall and hanging-wall of the fault possess a well-developed fault rock stratigraphy made up, from structurally lowest to the top, of massive undeformed recrystallized limestone, a zone of cemented breccia sheets, corrugated polished slip planes, and first brecciated, then unbrecciated scree.

The observed slip surfaces of the Manisa Fault contain two sets of striations that suggest an early phase of sinistral strike-slip and a subsequent normal-slip movements. The first phase is attributed to: (i) approximately E-W-directed compression that commenced during either (?) Early-Middle Pliocene time or (ii) the current extensional tectonics and consequent modern graben formation in southwest Turkey that initiated during the Plio-Quaternary. During this period, the Manisa Fault was reactivated and it became a major segment. Stress inversion of fault slip data suggests that southwest Turkey has been experiencing multidirectional crustal extension, with components of approximately N-S, E-W, NE-SW and NW-SE extension. Following the reactivation, the inherited fault segments were connected to each other through interaction, linkage and amalgamation of previously discontinuous and overlapping smaller stepping adjacent faults. Linkage was via the formation of new connecting (breaching) fault(s) or by curved propagation of fault-tips. The result is a single through-going corrugated fault trace with distinct along-strike bends. The final geometry of the Manisa Fault is thus the combined result of reactivation and continuing interaction between previously discontinuous segmented fault traces.