Numerical modelling of deformation of multi-directional random waves over a varying topography

Two numerical formulations of the breaking phenomenon were implemented in a numerical model for random wave propagation based on the elliptic formulation of the mild-slope equation. The randomness of the wave field was simulated based on a spectral component method, in which the 3-D spectrum is discretised in components of equal energy. One of the breaking process formulations is based on the concept of breaking each independent spectral component. The other is based on the distribution of the local amount of energy dissipated through the independent spectral components. The model based on the concept of breaking each independent spectral component produces the best estimates of the wave field, when the numerical results are compared with laboratory data.     

Forecasting ocean wave energy: The ECMWF wave model and time series methods

Recently, the technology has been developed to make wave farms commercially viable. Since electricity is perishable, utilities will be interested in forecasting ocean wave energy. The horizons involved in short-term management of power grids range from as little as a few hours to as long as several days. In selecting a method, the forecaster has a choice between physics-based models and statistical techniques. A further idea is to combine both types of models. This paper analyzes the forecasting properties of a well-known physics-based model, the European Center for Medium-Range Weather Forecasts (ECMWF) Wave Model, and two statistical techniques, time-varying parameter regressions and neural networks. Thirteen data sets at locations in the Atlantic and Pacific Oceans and the Gulf of Mexico are tested. The quantities to be predicted are the significant wave height, the wave period, and the wave energy flux. In the initial tests, the ECMWF model and the statistical models are compared directly. The statistical models do better at short horizons, producing more accurate forecasts in the 1-5 h range. The ECMWF model is superior at longer horizons. The convergence point, at which the two methods achieve comparable degrees of accuracy, is in the area of 6 h. By implication, the physics-based model captures the underlying signals at lower frequencies, while the statistical models capture relationships over shorter intervals. Further tests are run in which the forecasts from the ECMWF model are used as inputs in regressions and neural networks. The combined models yield more accurate forecasts than either one individually.     

Robust control based on feedback linearization for roll stabilizing of autonomous underwater vehicle under wave disturbances

In the case of Autonomous Underwater Vehicle(AUV) navigating with low speed near water surface,a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance.Robust control is applied,which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer.Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system.For parameter uncertainty of motion model,the controller is designed with mixed-sensitivity method based on H-infinity robust control theory.Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface.     

Study on scattering wave force of horizontal and vertical plate type breakwaters

The interaction between wave and horizontal and vertical plates is investigated by the boundary element method,and the relations of wave exciting force with plate thickness,submergence and length are obtained.It is found that:1) The efficient wave exciting force exists while plate submergence is less than 0.5 m,and the plate is very thin with order O(0.005 m).2) The maximum heave wave exciting force exists,and it is the main factor for surface and submerged horizontal plate while the roll force can be ignored.3) The maximum sway wave exciting force exists,it is the main factor for surface or submerged vertical plate,and the roll force is about 20 times of horizontal plate.     

三次样条插值在浮性频率计算中的应用

在普遍利用海洋观测站标准层的温度、盐度数据估算稳定层化海水浮性频率的传统算法中引入自然三次样条插植方法，不仅可使计算结果的精度得以提高，而且还可方便地对观测深度范围内的任一水层进行插值，从而获得总体曲率最小的温度、盐度和浮性频率随深度的分布。本文以南海（13°30’N，118°30’E；9°30’N，lll°30’E）及北太平洋（40°00’N130°00’W）3个测站为例，说明了在浮性频率的传统算法中引入自然三次样条插值法的可行性。     

迎风有限元法在三维潮流数值模拟中的应用

为研究和开发迎风有限元法在河口海岸三维波数值模拟中的应用，并为建立三维物质扩散模型，最终为解决实际工程问题打下基础，以非线性浅水波方程为基础，采用一咱平面迎风有奶元与垂向工有限差分相结合地数值计算方法建立三维潮流数学模型，基地实际的物理过程，在计算中将三维流动分成外重力波和内重力波，耦联求解潮位和流速的空间分布。应用本模式计算了天津新港附近渤海海域的三维潮流运动，以较高的分辩率揭示了潮流空间结构特     

Gravity torques for surface waves

The effects of the gravity torques acting on the angular momentum of surface gravity waves are calculated theoretically. For short crested waves the gravity torque is caused by the force of gravity on the orbiting fluid particles acting down the slopes of the crests and troughs and in the direction parallel to the crests and troughs. The gravity torque tries to rotate the angular momentum vectors, and thus the waves themselves, counterclockwise in the horizontal plane, as viewed from above, in both hemispheres. The amount of rotation per unit time is computed to be significant assuming reasonable values for the along-crest and trough slopes for waves in a storm area. The gravity torque has a frequency which is double the frequency of the waves. For long crested waves the gravity torque acts in the vertical plane of the orbit and tries to decelerate the particles when they rise and accelerate them when they fall. By disrupting the horizontal cyclostrophic balance of forces on the fluid particles (centrifugal force versus pressure force) the gravity torque accounts qualitatively for the three characteristics of breaking waves: that they break at the surface, that they break at the crest, and that the crest breaks in the direction of wave propagation.     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

关于风浪预报公式和风区宽度的注记

从定常波的风浪波高随风距成长的预报公式出发 ,在一定条件下 ,导出各波向上风浪波高分量与该波向上的风距之间的关系 ,以便在不规则风区上推算风浪波高和平均波向 ;同时 ,对风区宽度作了定量化的分析。     

渤海悬浮颗粒物的三维输运模式 I.模式

为了长时间,大范围研究渤海中悬浮物的输运规律,研究应用并改造了备国汉堡大学的粒子追踪悬浮物输运的三维模式,模式中考虑了风、气压等气象要素以外海传入的潮波作用下的三维正压海流对悬浮颗粒物的输运．同时考虑了悬浮颗粒物的学降及再悬浮机制和底质中的细颗粒物的运动,将风浪的作用引入了悬浮物输运的计算,数值模式应用的粒五追踪方法,能较好地反映悬浮物浓度的迅速变化。