Impact of mega-scale sand extraction on tidal dynamics in semi-enclosed basins: An idealized model study with application to the Southern North Sea

Long-term considerations of repeated and increasing sand extraction on the Netherlands Continental Shelf (North Sea) may lead to the creation of a mega-scale extraction trench in front of the Dutch coast (length hundreds of km, width over 10 km, depth several m). We investigate the impact of such a huge topographic intervention on tidal dynamics, which is a key aspect in hydrodynamics, and indirectly also affecting morphodynamics and ecology.     

On the criteria for the initiation of motion in tidal inlets,deterministic and stochastic approaches

Details are given herein of the refinement and application of a three-dimensional layer integrated numerical model to predict morphological changes in tidal basins. The solution of governing differential equations, which consist of the conservation of mass and momentum for the hydrodynamics, the transport equation for the suspended sediment fluxes and the sediment mass conservation equation for the bed level changes are carried out by the use of Alternating Direction Implicit (ADI) Finite Difference Method (FDM). The model includes different criteria for the initiation of motion namely Shields (1936, Application of Similarity Principles and Turbulence Research to Bed load Movement, Hydrodynamics Laboratory, California Institute of Technology, Pub. No. 167), Kolahdoozan (1999, Numerical Modelling of Geomorphological Processes in Estuarine Waters, PhD Thesis, Department of Civil and Environmental Engineering, University of Bradford, Bradford, UK, 288) and Zanke (2003, On the Influence of Turbulence on the Initiation of Sediment Motion, International Journal of Sediment Research, 18(1), 17–31), to compare different aspects of flow conditions. As the flow is highly turbulent with the random nature of its components, many researchers have tried to express sediment transport processes by using stochastic approaches. In the current study both deterministic and stochastic methods are included in the numerical model to evaluate their accuracy and efficiency. To validate the numerical model results, laboratory measurements are used, with these being obtained from an earlier experimental program undertaken by the authors. Results of a short term bed level changes in a laboratory model harbor are included for the model verification purposes. Comparisons are undertaken using different criteria for the initiation of motion, with the results highlighting that the unsteadiness in the flow parameters included in the numerical model has a major effect on the bed level changes inside the harbor, in compare with the turbulence structure of the flow. The model is then applied to a real case study of the Humber Estuary, located in the UK, with comparisons being undertaken for different criteria for the initiation of motion, using both deterministic and stochastic approaches for the long term bed level predictions.     

成山头海域潮流能资源可开发量评估

针对潮流能资源较丰富的成山头外海域,利用FVCOM数值模式,在良好模拟该海域潮流场的基础上,运用能量耗散原理,对该海域的潮流能资源可开发量进行了评估。结果表明,在转换装置的拖拽系数为0.07时,面积为27km2的成山头近岸海域的可开发潮流能资源约为17.9MW,其中大潮期间的可开发量高达37.7MW,而小潮期间则为7.3MW。在此条件下,该海域大潮期间涨急和落急时刻的流速分别减小了40%和38%,但发电装置对潮汐的影响较小,在成山头顶端的高潮潮位仅下降了4cm。     

盆地模拟技术中的化学动力学生烃模型与应用

油气地表化探数据的失真(特别是数据中的高值失真点)直接影响到化探异常圈定。本文根据油气地表化探数据的分布特点，利用概率统计原理，提出一种适合油气化探资料前期处理的失真数据的概率判定方法和处理手段，在对实际资料的应用中，取得了良好的效果。     

山西省水化正常动态和地震的关系

使用《地震分析预报方法指南——水文地球化学方法》软件系统,对山西省多年来的水化资料进行了处理分析,给出各台站水氡的正常年动态变化;对两次大同地震前CO_2及He的前兆异常进行了总结,并提出了判断异常前兆的标志.     

太湖风浪场的计算与比较

首先探讨了浅水风浪数值模型—SWAN模型应用于模拟内陆湖泊风浪生成和传播变形时的特点。该模型存在不能有效地模拟近固壁边界处风浪场的缺点,以能正确地模拟湖区的风浪场和节约计算时间为原则,确定了计算范围。对太湖进行了风场和风浪场的现场观测。分别利用规范公式和SWAN模型两种方法、根据观测和预报的风场计算了湖区的有效波高,并将计算结果和现场观测值进行了详细比较。结果表明基于观测的风场,利用两种方法所计算的太湖风浪场的精度基本相当;在根据观测的风场、利用SWAN模型计算内陆湖泊的风浪场时,需要精心选择恰当的风场;在根据预报的风场预报湖区风浪场时,SWAN模型的精度要高于规范公式的精度。     

Response of a climate model to tidal mixing parameterization under present day and last glacial maximum conditions

Experiments with a climate model were conducted under present day and last glacial maximum conditions in order to examine the model’s response to a vertical mixing scheme based on internal tide energy dissipation. The increase in internal tide energy flux caused by a 120 m reduction in sea level had the expected effect on diffusivity values, which were higher under lower sea level conditions. The impact of this vertical diffusivity change on the Atlantic meridional overturning is not straightforward and no clear relationship between diffusivity and overturning is found. There exists a weak positive correlation between overturning and changes to the power consumed by vertical mixing. Most of the climatic response generated by sea level change was not related to alterations in the internal tide energy flux but rather to the direct change in sea level itself.     

真空预压下软土渗透系数对固结的影响

考虑正常固结状态下前期固结压力对渗透系数的影响,利用ABAQUS软件,将渗透系数随固结应力的变化关系应用于真空预压下单井的三维有限元计算。计算结果表明,考虑渗透系数随固结应力的变化,其表面沉降要比渗透系数保持不变的沉降量小,固结过程较慢,相应的固结时间要长;前期固结压力越大,表面沉降将越小,达到相同固结度时所需固结时间也越长。     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.