渤、黄、东海潮汐、潮流的数值模拟与研究

基于FVCOM海洋数值模式,采用高分辨率的三角形网格,对渤、黄、东海的潮汐、潮流进行数值模拟,并通过比较120个沿岸验潮站和14个潮流观测站的实测与模拟结果进行模型验证,两者符合较好。根据模拟结果,给出了四个主要分潮的潮汐同潮图和5m层潮流最大流速及最大潮流同潮时分布。渤、黄、东海共有5个半日分潮和3个全日分潮的独立旋转潮波系统,且都呈逆时针方向旋转;半日潮流和全日潮流各有12个圆流点;在冲绳岛和奄美岛两侧的4个半日潮流圆流点分别呈对称分布,其中有3个为本文首次给出;在日本九州岛西侧还新给出2个全日潮流圆流点。有关它们的存在性需要实测资料的进一步检验。     

Mercury partition in the interface between a contaminated lagoon and the ocean: The role of particulate load and composition

After having estimated the patterns of flow to the ocean and found some seasonal and tidal differences, mainly with regard to the relative importance of dissolved and particulate fractions, mercury partitioning at the interface between a contaminated lagoon and the Atlantic Ocean was investigated during four tidal cycles in contrasting season and tidal regimes. Mercury was found to be located predominantely in the particulate fraction throughout the year, contributing to its retention within the system. Seasonal conditions, variations in marine and fluvial signals and processes affecting bed sediment resuspension influenced the character and concentration of suspended particulate matter in the water column. Variation in the nature, levels and partitioning of organic carbon in the particulate fraction affected levels of particulate mercury as well as mercury partitioning. These results highlight the dominant role of suspended particulate matter in the distribution of anthropogenic mercury and reinforce the importance of competitive behavior related to organic carbon in mercury scavenging.     

Benchmark on the numerical simulations of the hydrodynamic and morphodynamic evolution of tidal channels and tidal inlets

A correct understanding of the hydrodynamics and morphodynamics of tidal basins is of fundamental importance for the fate of the Venice Lagoon, Italy. If on one hand, the development of sophisticated numerical models is called for in order to reproduce the complexity of the mechanisms governing the morphodynamic evolution of many natural environments, including lagoons, on the other hand, a clear knowledge of the reliability and limits of the results provided by these models is crucial in order to establish the condition under which they can be safely applied. To this aim, researchers involved in numerical modeling in the framework of the recent Corila research programmes, agreed to perform an accurate comparison of results provided by three different numerical models, applying them to the test case offered by the experimental investigations performed under controlled conditions by Tambroni et al. (2005a). Here, we consider the following numerical models: (i) a 2D finite element hydrodynamic model coupled with a 2D finite volume morphodynamic model (5 and 3); (ii) a 2D finite element morphodynamic model (Ferrarin et al., 2008); (iii) a 2D depth-averaged model for the inlet region, coupled with a 1D model for the channel (Tambroni et al., 2005b). A first set of simulations concerns the fixed bed case and shows that all the models provide similar results: in particular, they are able to predict the observed free surface oscillations satisfactorily, while comparison with the measured velocity field is less satisfactory. Moreover, as far as the flow field at the inlet is concerned, the models describe accurately the potential flow into the channel during the flood phase, while they are not able to adequately reproduce the occurrence of the fine structure of the shear layers shed by the inlet edges during the ebb phase. This limit is related to the shallow water character of the models. As for the morphodynamics, the long term equilibrium configurations of the bottom of the channel and of the near inlet region show qualitative agreement with the experimental observations, although in this case the differences between the results provided by the distinct numerical approaches are more marked.     

Application of a finite element model to the computation of tides in the Mersey Estuary and Eastern Irish Sea

A variable mesh finite element model of the Irish and Celtic Sea regions with/without the inclusion of the Mersey estuary is used to examine the influence of grid resolution and the Mersey upon the higher harmonics of the tide in the region. Comparisons are made with observations and published results from finite difference models of the area. Although including a high resolution representation of the Mersey had little effect upon computed tides in the western Irish Sea it had a significant effect upon tidal currents in the eastern Irish Sea. In addition the higher harmonics of the M₂ tide in near-shore regions of the eastern Irish Sea particularly the Solway and Mersey estuary together with Morecambe Bay showed significant small scale variability. The Mersey was used to test the sensitivity to including estuaries because high resolution accurate topography was available. The results presented here suggest that comparable detailed topographic data sets are required in all estuaries and near-shore regions. In addition comparisons clearly show the need for an unstructured grid model of the region that can include all the estuaries. Such an unstructured grid solution was developed here within a finite element approach, although other methods in particular the finite volume, or coordinate transformations/curvilinear grids and nesting could be applied.     

An idealized model study of flocculation on sediment trapping in an estuarine turbidity maximum

Flocculation has an important impact on particle trapping in estuarine turbidity maximum (ETM) through associated increases in particle settling velocity. To quantify the importance of the flocculation processes, a size-resolved flocculation model is implemented into an ocean circulation model to simulate fine-grained particle trapping in an ETM. The model resolves the particle size from robust small flocs, about 30 μm, to very large flocs, over 1000 μm. An idealized two-dimensional model study is performed to simulate along-channel variations of suspended sediment concentrations driven by gravitational circulation and tidal currents. The results indicate that the flocculation processes play a key role in generating strong tidal asymmetrical variations in suspended sediment concentration and particle trapping. Comparison with observations suggests that the flocculation model produces realistic characteristics of an ETM.     

The erosion rates of cohesive sediments in Venice lagoon,Italy

The stability of cohesive sediments from Venice lagoon has been measured in situ using the benthic flume Sea Carousel. Twenty four stations were occupied during summertime, and a sub-set of 13 stations was re-occupied during the following winter. Erosion thresholds and first-order erosion rates were estimated and showed a distinct difference between inter-tidal and sub-tidal stations. The higher values for inter-tidal stations are the result of exposure that influences consolidation, density, and organic adhesion. The thresholds for each state of sediment motion are well established. However, the rate of erosion once the erosion threshold has been exceeded has been poorly treated. This is because normally a time-series of sediment concentration (C) and bed shear stress (τ₀(t)) is used to define threshold stress or cohesion (τ_crit,z) and erosion rate (E). Whilst solution of the onset of erosion, τ_crit,0, is often reported, the evaluation of the erosion threshold variation through the process of erosion (eroded depth) is usually omitted or not estimated. This usually leads to assumptions on the strength profile of the bed which invariably has no credibility within the topmost mm of the bed where most erosion takes place. It is possible to extract this information from a time-series through the addition of a step in data processing. This paper describes how this is done, and the impact of this on the accuracy of estimates of the excess stress (τ₀(t)–τ_crit,z) on E.     

Coastal landslides and swelling clays at Røsnæs,Denmark

Prior, D. B., 1973: Coastal landslides and swelling clays at Røsnæs, Denmark. Geografisk Tidsskrift, 72: 45–48. København, September 30, 1973.

The landslide morphology of the Røsnæs area has been examined and materials involved in active landsliding analysed.     

Heavy metal pollution and assessment in the tidal flat sediments of Haizhou Bay,China

The heavy metal inventory and the ecological risk of the tidal flat sediments in Haizhou Bay were investigated. Results show that the average concentrations of heavy metals in the surface sediments exceeded the environment background values of Jiangsu Province coastal soil, suggesting that the surface sediments were mainly polluted by heavy metals (Cd, Cr, Cu, Mn, Pb and Zn). In addition, the profiles of heavy metals fluxes can reflect the socio-economic development of Lianyungang City, and heavy metals inputs were attributed to anthropogenic activities. Cr, Cu, Pb and Zn were mainly present in the non-bioavailable residual form in surface sediments, whereas Cd and Mn were predominantly in the highly mobile acid soluble and reducible fractions. The ecological risk of the polluted sediments stemmed mainly from Cd and Pb. According to the Sediment quality guidelines (SQGs), however, the adverse biological effects caused by the heavy metals occasionally occurred in tidal flat.