浮托安装进船过程中护舷碰撞力实测研究

浮托安装法广泛应用于大型组块海上安装。导管架平台上部组块浮托安装进船过程中,风、浪、流引起的浮托驳船横向运动造成浮托驳船与导管架桩腿的碰撞,碰撞力可能会对导管架结构造成损伤。陆丰7-2上部组块浮托安装中,为了监测碰撞力大小,设计了碰撞力海上监测系统。通过在导管架外侧四个桩腿上安装光纤光栅应变传感器对碰撞过程中导管架桩腿进行应力监测,进而计算碰撞力。对碰撞过程,载荷作用位置、方向进行简化,并对载荷大小及垂向作用位置对计算的影响进行了研究。结构分析模型简化后,测点von-Mises应力与碰撞力大小成正比,对导管架整体结构建模计算并取局部结构计算比例系数,结合应力实测数据计算出进船过程中驳船对导管架桩腿碰撞力。     

木本植被覆盖岸坡上波浪爬升过程的数值模拟研究

近岸木本植物构成的生态缓冲带作为新型的海岸软防护结构,兼具功能性和生态友好性,在沿海工程建设中愈发受到关注,如何深入开展其防护效果的机理研究是目前亟待解决的问题。本文采用数值模拟方法,在N-S方程中分别考虑树枝和树干的拖曳力影响,提出了木本植被作用下波浪沿斜坡爬升的表面波衰减的连续介质等效模型,并采用MAC法来跟踪自由曲面上的水颗粒轨迹。本文以波浪沿1/30的斜坡爬升为算例,对比讨论了有无植被作用下波浪的传播过程,并将算例结果与以往试验结果规律进行对照,验证了数值模型的有效性。最后,分别讨论了植物枝干的高度、密度、树枝倾斜角度等植被特性和波浪因素对植被消浪效果的影响,得到植被消浪的基本规律。文中的计算结果也可为实际的护岸工程和生态景观设计提供参考。     

Hydrodynamics of salt marsh creek systems: Implications for marsh morphological development and material exchange

Integrated ebb-aligned drainage systems are a feature of tide-dominated marshes, and are generally regarded as major conduits for material exchange. In north Norfolk, highly unsteady creek flows exhibit well-developed velocity and stress transients which result from the discontinuous nature of the tidal prism and the interaction of shallow water tidal inputs with hydraulically rough vegetated surfaces. Marsh morphological development is governed by a form-process feedback, in the sense that the marsh surface acts as a topographic threshold separating the depositional regime of below-marsh tides from the erosional (ebb-dominated) regime of over-marsh tides. Vertical marsh growth results in increasing intermittency of creek sediment transport. Furthermore, velocity transients are associated with large discharges which must be allowed for in material flux computations. Creek flux measurements are not in themselves sufficient to estimate total material budgets, since a large proportion of tidal exchange may take place via the marsh edge. Such studies should focus instead on direct measurement of marsh surface processes. These findings have relevance beyond this back-barrier setting to marshes of different geometry, occupying a broad range of the tidal energy spectrum.     

日照港30万吨油码头船舶泊稳物理模型试验研究

日照港拟在岚北港区建设30万吨级原油码头,通过实验测定了船舶在风、浪、流作用下对码头结构的作用力、船舶运动量最大值、最大缆绳拉力、船舶对护舷撞击能量和撞击力,为工程结构设计和操船规程的制定提供可靠依据。     

中国高技能劳动力与一般劳动力的空间分布格局及其影响因素

基于2000和2010年全国人口普查分县数据和地级行政单元数据,采用不均衡指数和空间自相关分析等方法,刻画中国高技能劳动力和一般劳动力的空间分布格局及其变化,并采用空间滞后模型,识别高技能劳动力与一般劳动力空间分布的决定因素及其变化。结果表明：① 两类劳动力总体的空间特征均为东南密集,西北稀疏;② 2000—2010年,高技能劳动力在空间分布上呈集中化的趋势,而一般劳动力呈分散化的趋势;③ 十年间高技能劳动力集聚区虹吸作用加强,其分布越发集中于沿海特大城市群,而一般劳动力集聚区回波作用加强,其分布越发均衡;④ 空间回归分析结果表明,职工平均工资、是否直辖市或省会、每万人在校高校学生、是否沿海城市、常住人口数和空间溢出效应在十年中一直都是决定高技能劳动力和一般劳动力空间分布的主要因素,而失业率、中学生师比、二氧化硫排放量和绿地率在2010年也成为影响两类劳动力空间分布的主要因素。对比两类劳动力的模型结果可得,高技能劳动力的空间分布受行政因素、高校因素和地区生活舒适度的影响更大,而一般劳动力的空间分布受劳动力市场因素的影响更大。     

基于STIRPAT模型的内蒙古沙漠化地区环境压力分析

实现经济与生态环境的协调发展,已经成为当前治理沙漠化的巨大挑战。如何定量分析人类活动和自然条件对环境的影响,是当前环境经济学界研究的热点问题。以内蒙古自治区71个沙漠化县为研究对象,以1986-2010年为研究区间做面板空间计量实证分析。选取了人口、富裕度、技术水平、风速和降水作为环境基础指标构建STIRPAT模型,从环境压力内在驱动角度定量分析不同的自然因素和人为因素对沙漠化地区环境的综合影响。结果表明:在观测数据范围内,富裕度、技术水平、风速和降水是内蒙古自治区环境压力的主要驱动因素;富裕度每增加1%,环境压力显著增加0.096%;技术水平每变化1%,将引起环境压力相应发生0.084%的变化;风速和降水每变动1%分别使得沙漠地区环境压力显著地增加0.640%和减少0.216%。     

国际贸易对地区劳动力技能升级的影响——基于中国大陆地区地级市的数据分析

随着中国人口红利逐渐消失,劳动力技能升级的问题日益突出。已有研究表明,发展中国家融入全球生产网络体系并非必定能够促进劳动力技能的升级。论文以中国大陆地区主要地级市为例,利用2005、2010、2015年的面板数据,试图分析国际贸易对各地区劳动力技能结构变动及技能升级方面的影响。结果表明：出口贸易对地区高技能劳动力就业比重具有抑制作用,表现为出口贸易对劳动力技能降级的影响;而进口贸易所产生的技术扩散效应尚未显现,进出口贸易整体影响并不显著。进一步来看,从区域产业地理格局角度,对外贸易影响了不同技能水平劳动力人群的区域间流动,使得对外贸易对劳动力技能升级的影响效果在不同的区位与城市规模特征间存在显著差异。沿海城市和大城市主要表现为进口贸易显著促进高技能劳动力就业比重进而带来地区劳动力技能升级,相对于内陆地区和小城市而言,出口贸易会带来高技能劳动力就业比重下降,地区劳动力技能呈现降级趋势。     

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.     

Modelling of the passive turning of a turret moored vessel in conditions of compact ice

The concept of the offshore oil and gas field development using floating ship-shaped platforms, frequently named floating production units (FPU further), with turret mooring is widely used in the world, including regions with harsh environment. The direct transfer of this concept to the Arctic seas is not possible, mostly due to the difficulties of maintaining a weathervaning, or passive turning regime in heavy ice conditions. The main danger relates to the fact that the expected FPU rotation under the action of high ice loads can be accompanied by a translational displacement of the FPU away from the mooring point. As a result, the mooring system may reach an overloaded state until the FPU turns to a favourable position relative to the ice drift direction. In the paper, we are focused on the investigation of a mathematical model of the passive FPU turning on a spot under the assumption that the ice cover is described by a rigid-plastic continuum. The study is performed both analytically and by numerical simulations. A number of specific FPU motion patterns are analytically derived from the model in quasi-static approximation in the form of successive limit states of the system FPU – ice continuum. Some results of the corresponding numerical simulation are presented that confirm the existence of similar solutions in the full dynamic setting of the problem. A partial parametric analysis of the problem is also performed.     

长江口外潮汐精细化模型研究与精度分析

长江口外海上测量除受风浪影响较大外,最重要的问题是潮位控制非常困难。文中简要阐述了开展长江口外潮汐精细化模型研究的方法,介绍了利用潮汐精细化模型对长江口外航路任意点进行潮汐预报的方法,并通过实测数据进行了精度分析,提出了建议。