饱和软黏土动力学特性循环扭剪试验研究

以饱和软黏土的循环扭剪试验研究为基础,阐明不固结不排水条件下饱和软黏土的动力学特性。在循环扭剪和循环三轴两种不同试验应力状态下,通过研究不同围压和不同静、动应力组合下饱和软黏土的应力等效破坏关系和应变等效破坏关系,提出在循环荷载作用下饱和软黏土的循环破坏同样遵循Mises屈服准则,且在Mises屈服准则下,饱和软黏土的循环强度趋于不变量。循环破坏的过程可以等效为一种拟静力弹塑性循环蠕变,建立了饱和软黏土循环累积变形随静荷载、循环荷载以及循环破坏振次之间的关系式。上述结论分别从应力和变形两个方面阐述饱和软黏土的动力学特性,与试验应力状态和围压无关,可以推广到一般应力状态下。     

Effect of Cyclic Loading Frequency on Undrained Behaviors of Undisturbed Marine Clay

Based on a series of cyclic triaxial tests, the effect of cyclic frequency on the undrained behaviors of undisturbed marine clay is investigated. For a given dynamic stress ratio, the accumulated pore water pressure and dynamic strain increase with the number of cycles. There exists a threshold value for beth the accumulated pore water pressure and dynamic strain, below which the effect of cyclic frequency is very small, but above which the accumulated pore water pressure and dynamic strain increase intensely with the decrease of cyclic frequency for a given number of cycles. The dynamic strength increases with the increase of cyclic frequency, whereas the effect of cyclic frequency on it gradually diminishes to zero when the number of cycles is large enough, and the dynamic strengths at different frequencies tend to the same limiting minimum dynamic strength. The test results demonstrate that the reasons for the frequency effect on the undrained soil behaviors are beth the creep effect induced by the loading rate and the decrease of sample effective confining pressure caused by the accumulated pore water pressure.     

渤海中南部悬浮物海洋调查资料分析

对于悬浮物 (SPM)的研究目前已引起诸多学者关注。作者利用 1998和 1999年的中德合作海洋调查所获得的资料进行分析。主要进行三个方面的工作 :研究悬浮物与透明度的关系 ;研究悬浮物与浊度的关系 ;估计海底剪切速度。并为研究悬浮物输运提供资料和作前期研究     

远区台风“三巴”对长江口波浪动力场的作用机制

针对远区台风对河口波浪动力场的影响问题,利用第三代波浪模式SWAN计算了远区台风"三巴"期间长江口波浪动力场分布,分析了陆架至河口区的波浪能量耗散和波致泥沙侵蚀的时空分布,发现波浪由外海向近岸传播过程中,波-波相互作用导致能量由高频向低频转换,周期和波长逐渐增大,近底层轨道流速增大,能量密度增高;阐明白帽破碎是维持深水区波浪能量平衡和限制波高成长的主要机制,底摩擦耗能和水深诱导的破碎耗能是长江口横沙东滩和崇明东滩邻近海域波高衰减的主要原因;提出波浪产生的底部切应力与相对水深有关,当波浪传播到浅水区时,波长和周期越大,波浪切应力越大。研究揭示了与河口相距数百公里的远区台风能够对长江口波浪动力场产生明显影响,河口水下三角洲前缘是最容易受到波浪侵蚀的区域,研究成果弥补了目前关于陆架远区台风对河口波浪动力场影响研究的不足,对深化认识远区台风对长江口动力环境、地貌演变、航运安全和滩涂保护等有重要科学意义。     

Estimation of Axial Pile Bearing Capacity According to Shear Strength Parameters of Soil

At pesent,it is very popular to estimate pile bearing capacity by use of empirical formula andphysical indexes of soil provided in the design codes for civil construction in China.This paper attempts toapply mechanical indexes of soil and semi-empirical formulas,which are based on soil mechanical theoriesand were summarized and presented by Meyerhof in 1976,to calculate the axial pile bearing capacity.Lo-ading test results of 24 single piles in Tianjin area have been collected and compared with the proposed cal-ulation approach.     

Shear Failure of a Clamped Dented Tubular Beam Under Lateral Impact

- The shear failure of a rigid-plastic dented clamped tubular beam under the lateral impact of a mass is investigated. Both the denting and the impact point are in the middle span of the beam. It is assumed that denting does not spread during the shear sliding. Numerical results show that the axial force and lateral deflection of the beam are very small at the moment of the occurence of shear failure, which means that the finite deformation effect can be neglected in the shear failure analysis. Also, some aspects of the initial impact energy are investigated.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

Estimation of Contamination of ERS-2 and POSEIDON Satellite Radar Altimetry Close to the Coasts of Australia

It is broadly acknowledged that the precision of satellite-altimeter-measured instantaneous sea surface heights (SSH) is lower in coastal regions than in open oceans, due partly to contamination of the radar return from the coastal sea-surface state and from land topography. This study investigates the behavior of ERS-2 and POSEIDON altimeter waveform data in coastal regions and estimates a boundary around Australia's coasts in which the altimeter range may be poorly estimated by on-satellite tracking software. Over one million 20 Hz ERS-2 (March to April 1999) and POSEIDON (January 1998 to January 1999) radar altimeter waveform data were used over an area extending 350 km offshore Australia. The DS759.2 (5'resolution) ocean depth model and the GSHHS (0.2 km resolution) shoreline model were used together to define the coastal regions. Using the 50% threshold retracking points as the estimates of expected tracking gate, we determined that the sea surface height is contaminated out to maximum distance of between about 8 km and 22 km from the Australian shoreline for ERS-2, depending partly on coastal topography. Using the standard deviation of the mean waveforms as an indication of the general variability of the altimeter returns in the Australian coastal region shows obvious coastal contamination out to about 4 km for both altimeters, and less obvious contamination out to about 8 km for POSEIDON and 10 km for ERS-2. Therefore, ERS-2 and POSEIDON satellite altimeter data should be treated with some caution for distances less than about 22 km from the Australian coast and probably ignored altogether for distances less than 4 km.     

Estimation of Uplift Capacity of Rapidly Loaded Plate Anchors in Soft Clay

Plate anchors are extensively used in civil engineering constructions as they provide an economical alternative to gravity and other embedded anchors. The rate of loading is one of the important factors that affects the magnitude of soil resistance as well as soil suction force. This article outlines the effect of pullout rate on uplift behavior of plate anchors (70 mm diameter) buried in soft saturated clay by varying the pullout rate from 1.4 mm/min to 21.0 mm/min. The variation of breakout force and suction force with embedment depth and rate of pull are presented. A correlation between the rate of increase of undrained strength of clay and anchor capacity with rate of strain has been established. Finally an empirical equation has been proposed that includes the rate of pull in the estimation of breakout capacity of anchors.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.